Park-to-reverse

Last updated

A park-to-reverse defect is a scenario in which cars with automatic transmission can fail to properly engage the parking mechanism, causing the vehicle to unintentionally roll, sometimes resulting in injury or vehicular accidents. This has significance in product liability law, and a number of major cases in the United States have been brought in which car manufacturers [1] [2] [3] were accused of negligence for not addressing an alleged dangerous flaw in the transmission.

Contents

A park-to-reverse situation involves a driver who believes that they have shifted into "park" and believing so, proceeds to exit the vehicle. There can then be a delay in vehicle movement sufficient for the driver to either fully or partially exit the vehicle before the vehicle moves. Typically, the vehicle will move backwards. However, when on certain vehicles the shift selector can be placed between the detented park and reverse gear positions; i.e. in false park the transmission is in hydraulic neutral, without the parking pawl engaged. As such the vehicle can also roll either forward or back in neutral. While less common, transmissions with the defect, can also be shifted to between "neutral" and "drive", and then self shift into "drive" or roll (called a "neutral to drive" accident).

Park-to-Reverse issues are nearly always caused by several possible design flaws in a vehicle's transmission which makes it possible for a driver to unknowingly place the vehicle's shift selector into a position in between the "park" and "reverse" gear positions. Yet rather than being in "park', this area is a transitional zone between gears, which is sometimes called "false park". [4] [5]

When a vehicle's transmission is in false park, it may appear to the driver that the vehicle is fully locked in "park". However, on vehicles with this defect the transmission is neither in park nor in hydraulic reverse. Instead, it is in neutral, an unstable position between the two gears. [6]

Risks

From this false park position, slight movements in the vehicle, vibration, or the build up of hydraulic pressure in the transmission can then cause the vehicle to reengage powered reverse after a delay from a few seconds to longer periods of time (what is called a "self shift"). This will cause the vehicle to suddenly and without warning move backwards unexpectedly under engine power. [7]

If the driver has exited the vehicle with the engine running (to for example retrieve an item, open a gate or close a garage door, etc.), a vehicle in false park can shift into powered reverse from a few seconds to several minutes or longer, after the driver has exited, and then run over the driver or a bystander. [8]

NHTSA

NHTSA (National Highway Traffic Safety Administration) refers to the "Park to Reverse" issue using various terms including "Unintended Powered Roll-Away" and has opened numerous investigations of these events over the last 35 years. [9]

Mechanical cause

With some automatic transmissions, it was possible to place the shift selector at any point, either in an intended gear or between a gear. Because of the possible safety issue of this, and because driving a vehicle not fully in a gear over a long period of time could damage the transmission, automakers developed what is called the "detent system." The system of detents was often used in conjunction with the "push button" shifters used on many automatics in the 1950s. Typical detent systems use either a detent spring and ball or a cantilever spring and this spring moves up and down over a series of teethed gears (called a "rooster comb" for how it looks, or an "inner manuel lever") turning the rooster comb to fine center the transmission in the intended gear position at the bottom of each gear. [10]

However, if the spring is too weak to always move the rooster comb to the bottom of the trough between the teeth, the vehicle can be left between gears. On certain U.S. car manufacturers' vehicles, the problem is made worse as there is a flat spot between "Park" and "Reverse" detents where the ball can rest, also resulting in a "false park".

Park to reverse lawsuits

Mraz v. DaimlerChrysler (2007)

A case involving the death of a Los Angeles dockworker killed by a park-to-reverse defect in a Dodge Dakota. The jury returned a verdict of $55.2 million, including $50 million in punitive damages. California Lawyer Attorney of the Year (CLAY) Award called the Mraz victory against DaimlerChrysler, "“one of the year's largest personal injury verdicts,: and noted that "this was the first park-to-reverse case against Chrysler in 25 years to make it to trial." [11] ”

Guillot v. Chrysler (2008)

A case against Chrysler for the death of an infant due to the park-to-reverse defect. [12] The case resulted in a $7.2 million verdict in St. Bernard Parish, Louisiana. [13] [14] [15]

Mundy v. Ford Motor Company and Legacy Ford Mercury, Inc. (2009)

A case which was centered Jessica Mundy becoming paralyzed as a result of her Ford Explorer going into false-park. The verdict concluded that $40 million be paid by the defendants. $30 million of the verdict was attributed to punitive damages. [16]

Related Research Articles

Double-clutching is a method of shifting gears used primarily for vehicles with an unsynchronized manual transmission, such as commercial trucks and specialty vehicles. While double clutching is not necessary in a vehicle that has a synchronized manual transmission, the technique can be advantageous for smoothly downshifting in order to accelerate and, when done correctly, it prevents wear on the synchronizers which normally equalize transmission input and output speeds to allow downshifting.

<i>Unsafe at Any Speed: The Designed-In Dangers of the American Automobile</i> 1965 book by Ralph Nader

Unsafe at Any Speed: The Designed-In Dangers of the American Automobile is a non-fiction book by consumer advocate Ralph Nader, first published in 1965. Its central theme is that car manufacturers resisted the introduction of safety features, and that they were generally reluctant to spend money on improving safety. The work contains substantial references and material from industry insiders. It was a best seller in non-fiction in 1966.

<span class="mw-page-title-main">Automatic transmission</span> Type of motor vehicle transmission that automatically changes gear ratio as the vehicle moves

An automatic transmission is a multi-speed transmission used in motor vehicles that does not require any input from the driver to change forward gears under normal driving conditions. Vehicles with internal combustion engines, unlike electric vehicles, require the engine to operate in a narrow range of rates of rotation, requiring a gearbox, operated manually or automatically, to drive the wheels over a wide range of speeds.

<span class="mw-page-title-main">Manual transmission</span> Motor vehicle manual gearbox; stick shift

A manual transmission (MT), also known as manual gearbox, standard transmission, or stick shift, is a multi-speed motor vehicle transmission system, where gear changes require the driver to manually select the gears by operating a gear stick and clutch.

<span class="mw-page-title-main">Jeep Grand Cherokee</span> Large American 4WD off road SUV

The Jeep Grand Cherokee is a range of mid-size SUVs produced by the American manufacturer Jeep. At its introduction, while most SUVs were still manufactured with body-on-frame construction, the Grand Cherokee has used a unibody chassis from the start.

<span class="mw-page-title-main">Electronic throttle control</span> Automobile technology

Electronic throttle control (ETC) is an automobile technology that uses electronics to replace the traditional mechanical linkages between the driver's input such as a foot pedal to the vehicle's throttle mechanism which regulates speed or acceleration. This concept is often called drive by wire, and sometimes called accelerate-by-wire or throttle-by-wire,.

<span class="mw-page-title-main">TorqueFlite</span> Automatic transmission made by Chrysler

TorqueFlite is the trademarked name of Chrysler Corporation's automatic transmissions, starting with the three-speed unit introduced late in the 1956 model year as a successor to Chrysler's two-speed PowerFlite. In the 1990s, the TorqueFlite name was dropped in favor of alphanumeric designations, although the latest Chrysler eight-speed automatic transmission has revived the name.

<span class="mw-page-title-main">Chrysler PowerFlite transmission</span> Automotive part

PowerFlite is a two-speed automatic transmission engineered and produced by the Chrysler Corporation and used in their passenger cars from 1954 to 1961. Production began in late 1953 and the simple and durable PowerFlite remained available on Plymouths and Dodges through the 1961 model year.

The Powerglide is a two-speed automatic transmission designed by General Motors. It was available primarily on Chevrolet from January 1950 through 1973, although some Pontiac models also used this automatic transmission after the fire at the Hydra-Matic factory in 1953. Powerglides were used extensively on Pontiacs produced for the Canadian market with Chevrolet powertrains. They were also used with Nova engines in the DJ-5A Jeeps produced 1968-1970 by Kaiser-Jeep and widely used as delivery vehicles by the United States Post Office. When introduced on upper-level Chevrolet models in 1950, the Powerglide represented the first automatic transmission offered in a low-priced automobile; in contrast, Ford did not offer their automatic transmission until 1951, while Plymouth car buyers had to wait until 1954. The transmission was simple and very durable, which satisfied customers.

<span class="mw-page-title-main">Jeep Patriot</span> Motor vehicle

The Jeep Patriot (MK74) is a front-engine five-door compact crossover SUV manufactured and marketed by Jeep, having debuted with the Jeep Compass in April 2006 at the New York Auto Show for the 2007 model year. Both cars, as well as Dodge Caliber shared the GS platform, differentiated by their styling and marketing, with the Patriot exclusively offering a four-wheel drive system, marketed as Freedom Drive II.

The AXOD was a 4-speed automatic transaxle for transverse front wheel drive automobiles from the Ford Motor Company. It was introduced in the 1986 Ford Taurus/Mercury Sable. The AXOD and its successors are built in Ford's Van Dyke Transmission plant in Sterling Heights, Michigan. Production of the final member of the family, the 4F50N, ended in November 2006.

The RFE is an automatic transmission family from Chrysler. The name refers to its Rear wheel drive design and Full Electronic control system.

Teletouch is the trade name for the transmission controls found on many Edsel brand automobiles manufactured by the Edsel and Mercury-Edsel-Lincoln (M-E-L) Divisions of the Ford Motor Company. The significance of the Teletouch systems lies in its conception, design and symbolism for American automobiles produced in the 1950s, and the gadgets designed into them. The main distinguishing feature of the system was its use of push buttons on the steering wheel to shift gears as opposed to a gear stick.

<span class="mw-page-title-main">Gear stick</span> Lever used for shifting gears manually

A gear stick, gear lever, gearshift or shifter, more formally known as a transmission lever, is a metal lever attached to the transmission of an automobile. The term gear stick mostly refers to the shift lever of a manual transmission, while in an automatic transmission, a similar lever is known as a gear selector. A gear stick will normally be used to change gear whilst depressing the clutch pedal with the left foot to disengage the engine from the drivetrain and wheels. Automatic transmission vehicles, including hydraulic automatic transmissions, automated manual and older semi-automatic transmissions, like VW Autostick, and those with continuously variable transmissions, do not require a physical clutch pedal.

When a person makes a claim for personal injury damages that have resulted from the presence of a defective automobile or component of an automobile, that person asserts a product liability claim. That claim may be against the automobile's manufacturer, the manufacturer of a component part or system, or both, as well as potentially being raised against companies that distributed, sold or installed the part or system that is alleged to be defective.

<span class="mw-page-title-main">2009–2011 Toyota vehicle recalls</span>

The 2009–11 Toyota vehicle recalls involved three separate but related recalls of automobiles by the Japanese manufacturer Toyota Motor Corporation, which occurred at the end of 2009 and the start of 2010. Toyota initiated the recalls, the first two with the assistance of the U.S. National Highway Traffic Safety Administration (NHTSA), after reports that several vehicles experienced unintended acceleration. The first recall, on November 2, 2009, was to correct a possible incursion of an incorrect or out-of-place front driver's side floor mat into the foot pedal well, which can cause pedal entrapment. The second recall, on January 21, 2010, was begun after some crashes were shown not to have been caused by floor mat incursion. This latter defect was identified as a possible mechanical sticking of the accelerator pedal causing unintended acceleration, referred to as Sticking Accelerator Pedal by Toyota. The original action was initiated by Toyota in their Defect Information Report, dated October 5, 2009, amended January 27, 2010. Following the floor mat and accelerator pedal recalls, Toyota also issued a separate recall for hybrid anti-lock brake software in February 2010.

Sudden unintended acceleration (SUA) is the unintended, unexpected, uncontrolled acceleration of a vehicle, often accompanied by an apparent loss of braking effectiveness. Such problems may be caused by driver error, mechanical or electrical problems, or some combination of these factors. The US National Highway Traffic Safety Administration estimates 16,000 accidents per year in the United States occur when drivers intend to apply the brake but mistakenly apply the accelerator.

<span class="mw-page-title-main">Jeep Liberty (KK)</span> Motor vehicle

The Jeep Liberty (KK), or Jeep Cherokee (KK) outside North America, is a compact SUV that was manufactured by Jeep and Introduced in 2008 as a successor to the first generation Liberty (KJ). The Liberty features unibody-construction and was assembled at the Toledo North Assembly Plant in the United States and other countries including Egypt and Venezuela. In 2010 Jeep estimated that 70% of Liberty buyers were first time Jeep owners.

<span class="mw-page-title-main">Jeep Grand Cherokee (WJ)</span> Motor vehicle

The Jeep Grand Cherokee (WJ) is the second generation of the Jeep Grand Cherokee sport utility vehicle. Unveiled in Detroit, Michigan, on June 16, 1998, production lasted until 2004 in the US, continuing in foreign markets until 2005. The WJ was completely overhauled from its ZJ predecessor, and was renowned for its off-road capability. Jeep marketed the (WJ) as "the most capable SUV ever."

<span class="mw-page-title-main">Car controls</span> Car parts used to control the vehicle

Car controls are the components in automobiles and other powered road vehicles, such as trucks and buses, used for driving and parking.

References

  1. ↑ LA Times (November 09, 2001) Safety Probe of Jeep Grand Cherokees Widens | https://www.latimes.com/archives/la-xpm-2001-nov-09-mn-2189-story.html
  2. ↑ Center for Auto Safety (October 6, 1980) Ford Transmissions Failure to Hold in Park | http://www.autosafety.org/ford-transmissions-failure-hold-park
  3. ↑ Park to Reverse Vehicle Defect - Who's affected | http://www.parktoreverse.com/whos-affected.html
  4. ↑ U.S. Department of Transportation - National Highway Traffic Safety Administration ODI Resume (Aug 26, 2004) |
  5. ↑ U.S. Department of Transportation - National Highway Traffic Safety Administration Final Report VRTC-DCD5083 Unintended Powered Roll-away in Reverse After Parking - Dodge Ram Pickup Track
  6. ↑ Ford Transmissions Failure Hold Park, Center for Auto Safety (Jun 10, 1980)]
  7. ↑ National Highway Traffic Safety Administration (NHTSA, EA01-017) Final Report "Unintended Powered Roll-Away In Reverse After Parking - Jeep Grand Cherokee at Scribd
  8. ↑ Chrysler engineer & ODI investigator both acknowledge defect exists (again in Chrysler vehicles) ODI Resume (INOA-EA01017-11717) Inadvertent Roll-away in Reverse When Parked - Jeep Grand Cherokee at Scribd
  9. ↑ NHTSA Action Number EA91010- for Inadvertent Roll-away in Reverse when Parked. at Slashdoc
  10. ↑ Scott P. Nealey (August 2013). "Mechanical Cause - Park-to-Reverse Vehicle Defects". Parktoreverse.com. Retrieved 2013-08-16.{{cite web}}: CS1 maint: numeric names: authors list (link)
  11. ↑ Jury finds DaimlerChrysler negligent in alleged `park-to-reverse' defect; Richard Mraz, 38, was working at APL on Terminal Island in '04 when a truck struck him.
  12. ↑ "$5M jury award upheld in fatal Jeep accident". UTSanDiego.com. 2010-09-28. Retrieved 2013-08-16.
  13. ↑ The Guillot vs. Chrysler case's verdict was upheld by the Louisiana Court of Appeals in a decision in 2010. https://scholar.google.com/scholar_case?case=8311834790354364040&q=guillot+chrysler&hl=en&as_sdt=4,19
  14. ↑ "LA Jury Returns Verdict Against Car Maker," The Associated Press, Mar. 9, 2007. http://www.utsandiego.com/news/2010/sep/28/5m-jury-award-upheld-in-fatal-jeep-accident/all/?print
  15. ↑ Law360 Chrysler Hit With $5M Verdict Over Baby's Death. http://www.law360.com/articles/52593/chrysler-hit-with-5m-verdict-over-baby-s-death
  16. ↑ "Verdict Mundy vs. Ford Motor Company and Legacy Ford Mercury, Inc". Dekalb County. Retrieved 11 August 2014.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.