Mystere | |
---|---|
Prototype S45 Mystere landing at Lachute Airport in 2004 | |
Role | Two-seat homebuilt monoplane |
National origin | Canada |
Manufacturer | Partenair Design |
Designer | Saleem Saleh |
First flight | 16 November 1996 (S44) 4 October 2001 (S45) |
Status | Kits no longer available |
Number built | 3 [1] [2] [3] |
The Partenair Mystere is a Canadian two-seat, pusher configuration monoplane that was designed by Partenair Design of Saint-Jean-sur-Richelieu, Quebec and intended for amateur construction from kits. [1] [4] [5]
Two prototypes were completed and flown and one kit delivered before the project was ended. One customer-built S45 was eventually completed and first flew on 10 November 2015. [1] [2] [3]
The Mystere is an all-composite, low-wing monoplane powered by a pusher piston engine. It has a pod and boom configuration with a T-tail and a fixed tricycle landing gear with wheel pants. [4] The cockpit has room for two occupants in tandem with dual controls and a two-piece canopy and windscreen. [4]
The prototype S44 Mystere first flew on 16 November 1996 powered by a Rotax 912 engine. [4] The second prototype S45 was powered by a 160 hp (119 kW) Lycoming IO-320 flat-four piston engine and first flew on 4 October 2001. [4]
The kit was to be supplied in three sub-kits made from primer-surfaced parts of low-odour epoxy. The construction time from the kit was estimated to have been 1000 hours. [5] [6] [7]
The prototype Partenair S44 Mystère was involved in a fatal accident on 24 October 1998. While departing Montréal/Les Cèdres Airport, the Rotax 912 engine failed and the aircraft impacted the ground, killing both occupants. [9]
This accident led to the aircraft being redesigned as the S45 with a Lycoming O-320 engine replacing the Rotax powerplant. Kitplanes magazine described the subsequent S45 as a "repowered aircraft for better overall performance and reliability". [5]
Data from Jane's All the World's Aircraft 2003-04, Kitplanes and The Incomplete Guide to Airfoil Usage [4] [5] [10]
General characteristics
Performance
The Advanced Aviation Explorer is a two-seat ultralight marketed in kit form, for amateur construction. It is a high-wing taildragger aircraft of pusher configuration with tandem seating.
The Weedhopper is an American high-wing, tractor configuration, tricycle gear, two-axis control ultralight aircraft originally developed by John Chotia during the height of the 1970s ultralight boom and introduced in 1977. When it was in production the aircraft was sold as a kit for amateur construction and could be assembled in 25-30 man-hours.
The Rans S-6 Coyote II is an American single-engined, tractor configuration, two-seat, high-wing monoplane designed by Randy Schlitter and manufactured by Rans Inc. The Coyote is available in kit form for amateur construction or as a completed light-sport aircraft.
The Circa Reproductions Nieuports are a family of Canadian 7/8 scale World War I sesquiplane aircraft replicas designed by Graham Lee of Lamont, Alberta for amateur construction from plans sold by Lee's company Circa Reproductions. Leading Edge Air Foils of Peyton, Colorado at one time also made construction kits available. Lee's Nieuports were among the earliest First World War replicas available and paved the way for later companies to produce plans and kits for a great variety of warbirds.
The Rans S-12 Airaile is a family of related American single-engined, pusher configuration, high-wing monoplanes designed by Randy Schlitter and manufactured by Rans Inc. The aircraft are available in kit form for amateur construction.
The Rocky Mountain Wings Ridge Runner is a family of American high wing, strut-braced, single engine, conventional landing gear aircraft that were designed by Stace Schrader and were produced by Rocky Mountain Wings of Nampa, Idaho for amateur construction from 2000 to 2018.
The Flying K Sky Raider is a family of American, high wing, strut-braced, single engine, conventional landing gear ultralight aircraft that was designed by Ken Schrader and produced by Flying K Enterprises and later Sky Raider LLC of Caldwell, Idaho for amateur construction.
The Carlson Sparrow is a family of American, high wing, strut-braced, single engine, ultralight aircraft that was designed by Ernst W. Carlson and produced by Carlson Aircraft of East Palestine, Ohio and later Skyline Technologies of Salem, Ohio for amateur construction.
The Golden Circle Air T-Bird is a family of high-wing, strut-braced, pusher configuration ultralight aircraft that was produced by Teratorn Aircraft of Clear Lake, Iowa from 1983 to 1989 and then Golden Circle Air of De Soto, Iowa from 1989 until the mid-2000s. In 2011 the aircraft were back in production by Indy Aircraft. The aircraft is produced as a kit for amateur construction.
The Earthstar Thunder Gull is a family of cantilever high-wing, tricycle gear ultralight aircraft, manufactured by Earthstar Aircraft of Santa Margarita, California as a kit for amateur construction or as a completed aircraft.
The Titan Tornado is large family of cantilever high-wing, pusher configuration, tricycle gear-equipped kit aircraft manufactured by Titan Aircraft of Austinburg, Ohio for amateur construction.
The Quicksilver GT500 is a family of American strut-braced, high-wing, pusher configuration, tricycle gear aircraft built by Quicksilver Aeronautics of Temecula, California. The aircraft is available as a kit for amateur construction or as a completed ready-to-fly aircraft.
The SlipStream Genesis is a family of American, strut-braced, high wing, pusher configuration, tricycle gear aircraft, produced in kit form, for amateur construction. Designed by Chuck Hamilton, the series were originally produced by Innovation Engineering of Davenport, Iowa and more recently by SlipStream International of Wautoma, Wisconsin.
The Arnet Pereyra Sabre II is an American, two-seats in side-by-side configuration, conventional landing gear-equipped, strut-braced, high-wing ultralight trainer that was produced by Arnet Pereyra Inc of Rockledge, Florida in kit form for amateur construction.
The M-Squared Breese is a large family of high-wing, strut-braced, pusher configuration, tricycle gear, ultralight aircraft produced by M-Squared Aircraft of St. Elmo, Alabama in kit form, for amateur construction.
The Raj Hamsa X-Air is an Indian, two-seat, high-wing, tricycle gear, tractor configuration, ultralight aircraft produced by Raj Hamsa Ultralights of Bangalore, Karnataka in kit form, for amateur construction.
The Rainbow Aerotrike is a family of South African two-seat ultralight trikes, made by Rainbow Aircraft of Edenvale, Gauteng and available in kit form for amateur construction or fully assembled. The type has been noted for its long-distance flights.
The Glasair GlaStar is an American amateur-built aircraft that was designed by Tom Hamilton and produced by Stoddard-Hamilton Aircraft and later Glasair Aviation. It was first flown in 1994 and was superseded in production by the Glasair Sportsman 2+2 c. 2005. When it was available the aircraft was supplied as a kit for amateur construction.
The World Aircraft Spirit is a Colombian/American amateur-built aircraft, designed by Max Tedesco and produced by World Aircraft Company. The aircraft was publicly introduced at AirVenture in 2011 and production is expected to commence in 2014. It is supplied as a kit for amateur construction or as a complete ready-to-fly aircraft.
The ARV Griffin is a Canadian homebuilt aircraft that was designed by Dave Marsden of the University of Alberta and produced by Canada Air RV and later by AC Millennium Corp, both of Edmonton. When it was available the aircraft was supplied as a kit for amateur construction.
Wikimedia Commons has media related to Partenair S-45 Mystere . |