Pearson Renegade

Last updated
Pearson Renegade
NamePearson Renegade
Boat
Draft 4 ft 3 in (130 cm)
Hull
LOA 27 ft 2 in (828 cm)
LWL 21"
Beam 8 ft 7 in (262 cm)

The Pearson Renegade is a 27' sloop rigged sailboat produced by Pearson Yachts of Bristol, RI from 1966-1969, with the first boats being sold in 1967. Designed by William Shaw, about 175 of the boats were built. They were Pearson's first split underbody boat and were designed to Cruising Club of America racing rules. They are also one of the first American "racer-cruiser" style boats that combine the comforts of a cruising boat with the advantage of a modified full keel with a spade rudder (see photo), like that of the Bill Lapworth Cal 40 designs that revolutionized ocean racing in the mid-late 1960s. The keel allows the boat to track well and have good stability. The deep balanced rudder allows a high degree of maneuverability, and the turning radius of the boat is very tight. It continues to be a sought after boat because of their stout construction and kindly sailing ability.

Early versions had a traditional two settee salon, while boats produced in 1968 and after feature a more modern galley starboard and settee to port. Both have a spacious V-berth over six feet long and were available with either a 30-HP Universal Atomic 4 gas inboard or an outboard well. The cockpit can comfortably accommodate 4-6 people, and the boat can sleep 4 adults below decks. Standard steering on the boat was with a tiller, but many owners have installed after-market wheel steering. Other typical upgrades would include a roller furling headstay to replace the original forestay, and upgraded instrumentation such as depth, speed, and wind gauges, which did not come standard on the original boats. For more information on upgrades and projects on the Pearson Renegade, visit the Renegade homepage via the link at the bottom of the page.

A 1967 Pearson Renegade PearsonRenegade.jpg
A 1967 Pearson Renegade
The Renegade Emblem Renegade Sail.jpg
The Renegade Emblem
The Renegade's spade rudder, allowing for quicker maneuvering than traditional keel rudders Spade Rudder.jpg
The Renegade's spade rudder, allowing for quicker maneuvering than traditional keel rudders

Specifications

LOA 27'2" (27' sloop)
LWL 21"
Beam 8'7"
Draft 4'3"
Displacement 6500 lbs
Ballast 2100 lbs (Internal Lead)
Head Room5' 10''
Berths 4
Water Capacity20 gals.
Fuel Capacity13 gals.
CCA Rating22.6 app.
Rigging Masthead sloop
Sails
Main 174 ft2
#1 Genoa (163%)277 ft2
#2 Genoa (153%)240 ft2
#3 Genoa (110%)198 ft2
Spinnaker CCA Rules

See also

Related Research Articles

<span class="mw-page-title-main">Tanzer 26</span> Sailboat class

The Tanzer 26 is a Canadian sailboat, intended for racing, day sailing and cruising. It was designed by Johann Tanzer and first built in 1974. The design is out of production.

<span class="mw-page-title-main">Capri 22</span> Sailboat class

The Capri 22 is an American trailerable sailboat, that was designed by Gary Mull and Frank Butler and first built in 1984.

<span class="mw-page-title-main">C&C 37/40</span> Sailboat class

The C&C 37/40 is a Canadian 12.05 metres (39.5 ft) LOA fibreglass monohull sailing yacht, designed in 1988 by Robert W. Ball of Cuthbertson & Cassian as a replacement for the earlier C&C 37 dating from 1981. The C&C 37/40 is a recreational keelboat of moderate displacement, intended as a cruiser/racer or oceangoing racer. The yachts have a masthead sloop rig, with a fin keel and an internally-mounted spade-type rudder. Over 110 of the 37/40 type were built before the Canadian plant closed in 1994. The design is no longer produced.

<span class="mw-page-title-main">Nonsuch 22</span> Sailboat class

The Nonsuch 22 is a Canadian trailerable sailboat, the smallest of the series of Nonsuch sailboats. It was designed by Mark Ellis Design and first built in 1984.

<span class="mw-page-title-main">Pearson 26</span> Sailboat class

The Pearson 26 is a family of American sailboats, that was designed by William Shaw and first built in 1970.

The Pearson Electra is an American trailerable sailboat that was designed by Carl Alberg as a Midget Ocean Racing Club (MORC) racer and first built in 1960.

<span class="mw-page-title-main">Marshall 22</span> Sailboat class

The Marshall 22 is an American sailboat that was designed by Breckenridge Marshall as a cruiser and first built in 1965.

The Parker Dawson 26 is an American trailerable sailboat that was designed by Robert Finch as a cruiser and first built in 1972.

The S2 9.2 is an American sailboat that was designed by Arthur Edmunds as a cruiser and first built in 1977.

The Freedom 35 is an American sailboat that was designed by David Pedrick as a racer/cruiser and first built in 1993.

The Bristol Caravel 22, sometimes called the Bristol 22 Caravel, Sailstar Caravel, or just the Caravel 22, is an American trailerable sailboat that was designed by Halsey Chase Herreshoff as a cruiser and first built in 1968. It is named for the class of sailing ship.

The Cal 2-24, also called the Cal 24-2 and the Cal 24 Mark II is an American trailerable sailboat that was designed by C. William Lapworth as a racer and first built in 1967.

The South Coast 21 is an American trailerable sailboat that was designed by Carl Alberg as a daysailer and first built in 1965.

The Nimble 25 Arctic, also called just the Nimble 25, is an American trailerable sailboat that was designed by Ted Brewer as a cruiser and first built in 1988.

The O'Day 22 is an American trailerable sailboat that was designed by C. Raymond Hunt & Associates as a cruiser and first built in 1972.

The Pearson 22 is an American trailerable sailboat that was designed by William Shaw as a racer-cruiser and first built in 1968.

The Pearson 23C is an American trailerable sailboat that was designed by William Shaw as a cruiser and first built in 1983.

The Pearson 23 is an American trailerable sailboat that was designed by William Shaw as a cruiser and first built in 1978.

<span class="mw-page-title-main">Pearson 24</span> Sailboat class

The Pearson 24 is an American trailerable sailboat that was designed by William Shaw as a cruiser and first built in 1967.

The Columbia 8.3 is a sailboat that was designed by Alan Payne as a cruiser and first built in 1976.