 | This article needs additional citations for verification .(November 2010) |
Phase congruency is a measure of feature significance in computer images, a method of edge detection that is particularly robust against changes in illumination and contrast.
| | This article needs additional citations for verification .(November 2010) |
Phase congruency is a measure of feature significance in computer images, a method of edge detection that is particularly robust against changes in illumination and contrast.
Phase congruency reflects the behaviour of the image in the frequency domain. It has been noted that edgelike features have many of their frequency components in the same phase. The concept is similar to coherence, except that it applies to functions of different wavelength.
For example, the Fourier decomposition of a square wave consists of sine functions, whose frequencies are odd multiples of the fundamental frequency. At the rising edges of the square wave, each sinusoidal component has a rising phase; the phases have maximal congruency at the edges. This corresponds to the human-perceived edges in an image where there are sharp changes between light and dark.
Phase congruency compares the weighted alignment of the Fourier components of a signal with the sum of the Fourier components.
where is the local or instantaneous phase as can be calculated using the Hilbert transform and are the local amplitude, or energy, of the signal. When all the phases are aligned, this is equal to 1.
Several ways of implementing phase congruency have been developed, of which two versions are available in open source, one written for Matlab [1] and the other written in Java as a plugin for the ImageJ software. [2]
Given the different notations used for its formulation, a unified version has been recently presented, where a methodology for the parameter tuning is also presented. [3]
The square-wave example is naive in that most edge detection methods deal with it equally well. For example, the first derivative has a maximal magnitude at the edges. However, there are cases where the perceived edge does not have a sharp step or a large derivative. The method of phase congruency applies to many cases where other methods fail.
A notable example is an image feature consisting of a single line, such as the letter "l". Many edge-detection algorithms will pick up two adjacent edges: the transitions from white to black, and black to white. On the other hand, the phase congruency map has a single line. A simple Fourier analogy of this case is a triangle wave. In each of its crests there is a congruency of crests from different sinusoidal functions.
Calculating the phase congruency map of an image is very computationally intensive, and sensitive to image noise[ citation needed ]. Techniques of noise reduction are usually applied prior to the calculation.
Additive synthesis is a sound synthesis technique that creates timbre by adding sine waves together.
In physics, interference is a phenomenon in which two waves combine by adding their displacement together at every single point in space and time, to form a resultant wave of greater, lower, or the same amplitude. Constructive and destructive interference result from the interaction of waves that are correlated or coherent with each other, either because they come from the same source or because they have the same or nearly the same frequency. Interference effects can be observed with all types of waves, for example, light, radio, acoustic, surface water waves, gravity waves, or matter waves.
In physics and mathematics, the phase of a periodic function of some real variable is an angle-like quantity representing the fraction of the cycle covered up to . It is denoted and expressed in such a scale that it varies by one full turn as the variable goes through each period. It may be measured in any angular unit such as degrees or radians, thus increasing by 360° or as the variable completes a full period.
In engineering, a transfer function of a system, sub-system, or component is a mathematical function which theoretically models the system's output for each possible input. They are widely used in electronics and control systems. In some simple cases, this function is a two-dimensional graph of an independent scalar input versus the dependent scalar output, called a transfer curve or characteristic curve. Transfer functions for components are used to design and analyze systems assembled from components, particularly using the block diagram technique, in electronics and control theory.
In physics, the wavelength is the spatial period of a periodic wave—the distance over which the wave's shape repeats. It is the distance between consecutive corresponding points of the same phase on the wave, such as two adjacent crests, troughs, or zero crossings, and is a characteristic of both traveling waves and standing waves, as well as other spatial wave patterns. The inverse of the wavelength is called the spatial frequency. Wavelength is commonly designated by the Greek letter lambda (λ). The term wavelength is also sometimes applied to modulated waves, and to the sinusoidal envelopes of modulated waves or waves formed by interference of several sinusoids.
In electrical engineering, impedance is the opposition to alternating current presented by the combined effect of resistance and reactance in a circuit.
In electronics, acoustics, and related fields, the waveform of a signal is the shape of its graph as a function of time, independent of its time and magnitude scales and of any displacement in time.
A Fourier series is a sum that represents a periodic function as a sum of sine and cosine waves. The frequency of each wave in the sum, or harmonic, is an integer multiple of the periodic function's fundamental frequency. Each harmonic's phase and amplitude can be determined using harmonic analysis. A Fourier series may potentially contain an infinite number of harmonics. Summing part of but not all the harmonics in a function's Fourier series produces an approximation to that function. For example, using the first few harmonics of the Fourier series for a square wave yields an approximation of a square wave.
A chirp is a signal in which the frequency increases (up-chirp) or decreases (down-chirp) with time. In some sources, the term chirp is used interchangeably with sweep signal. It is commonly applied to sonar, radar, and laser systems, and to other applications, such as in spread-spectrum communications. This signal type is biologically inspired and occurs as a phenomenon due to dispersion. It is usually compensated for by using a matched filter, which can be part of the propagation channel. Depending on the specific performance measure, however, there are better techniques both for radar and communication. Since it was used in radar and space, it has been adopted also for communication standards. For automotive radar applications, it is usually called linear frequency modulated waveform (LFMW).
Fourier optics is the study of classical optics using Fourier transforms (FTs), in which the waveform being considered is regarded as made up of a combination, or superposition, of plane waves. It has some parallels to the Huygens–Fresnel principle, in which the wavefront is regarded as being made up of a combination of spherical wavefronts whose sum is the wavefront being studied. A key difference is that Fourier optics considers the plane waves to be natural modes of the propagation medium, as opposed to Huygens–Fresnel, where the spherical waves originate in the physical medium.
A sine wave, sinusoidal wave, or just sinusoid is a mathematical curve defined in terms of the sine trigonometric function, of which it is the graph. It is a type of continuous wave and also a smooth periodic function. It occurs often in mathematics, as well as in physics, engineering, signal processing and many other fields.
In signal processing, time–frequency analysis comprises those techniques that study a signal in both the time and frequency domains simultaneously, using various time–frequency representations. Rather than viewing a 1-dimensional signal and some transform, time–frequency analysis studies a two-dimensional signal – a function whose domain is the two-dimensional real plane, obtained from the signal via a time–frequency transform.
The superposition principle, also known as superposition property, states that, for all linear systems, the net response caused by two or more stimuli is the sum of the responses that would have been caused by each stimulus individually. So that if input A produces response X and input B produces response Y then input produces response.
In physics and engineering, a phasor is a complex number representing a sinusoidal function whose amplitude (A), angular frequency (ω), and initial phase (θ) are time-invariant. It is related to a more general concept called analytic representation, which decomposes a sinusoid into the product of a complex constant and a factor depending on time and frequency. The complex constant, which depends on amplitude and phase, is known as a phasor, or complex amplitude, and sinor or even complexor.
The electromagnetic wave equation is a second-order partial differential equation that describes the propagation of electromagnetic waves through a medium or in a vacuum. It is a three-dimensional form of the wave equation. The homogeneous form of the equation, written in terms of either the electric field E or the magnetic field B, takes the form:
The Kuramoto model, first proposed by Yoshiki Kuramoto, is a mathematical model used to describing synchronization. More specifically, it is a model for the behavior of a large set of coupled oscillators. Its formulation was motivated by the behavior of systems of chemical and biological oscillators, and it has found widespread applications in areas such as neuroscience and oscillating flame dynamics. Kuramoto was quite surprised when the behavior of some physical systems, namely coupled arrays of Josephson junctions, followed his model.
In electrical engineering, a sinusoid with angle modulation can be decomposed into, or synthesized from, two amplitude-modulated sinusoids that are offset in phase by one-quarter cycle. All three functions have the same center frequency. Such amplitude modulated sinusoids are known as the in-phase and quadrature components. In some contexts it is more convenient to refer to only the amplitude modulation (baseband) itself by those terms.
In statistical signal processing, the goal of spectral density estimation (SDE) is to estimate the spectral density of a random signal from a sequence of time samples of the signal. Intuitively speaking, the spectral density characterizes the frequency content of the signal. One purpose of estimating the spectral density is to detect any periodicities in the data, by observing peaks at the frequencies corresponding to these periodicities.
Least-squares spectral analysis (LSSA) is a method of estimating a frequency spectrum, based on a least squares fit of sinusoids to data samples, similar to Fourier analysis. Fourier analysis, the most used spectral method in science, generally boosts long-periodic noise in long gapped records; LSSA mitigates such problems. Unlike with Fourier analysis, data need not be equally spaced to use LSSA.
Phase-Stretch Adaptive Gradient-Field Extractor (PAGE) is an edge detection algorithm based on physics of electromagnetic diffraction and dispersion. A computational imaging algorithm, it identifies edges, their orientations and sharpness in a digital image where the image brightness changes abruptly. Edge detection is a basic operation performed by the eye and is crucial to visual perception.
{{cite journal}}: Cite journal requires |journal= (help)