Piccard Eureka

Eureka
Role	Single seat ultralight
National origin	Switzerland
Designer	Bertrand Piccard
First flight	c.1984
Number built	1

Last updated May 07, 2020

The Swiss Piccard Eureka was designed to be an easily transportable single seat three-axis ultralight. Its development was brought to a halt by the Swiss ban on ultralight aircraft in 1984.

Design and development

The Eureka was a small but conventionally laid out tractor configuration low-mid wing monoplane with an open cockpit and cruciform tail. It was formed from aluminium tubing with fabric covering. The wings were approximately semi-elliptical in plan and wire braced from above and below, with straight, unswept leading edges and curved trailing edges. The 2.05 m (6 ft 7 in) root chord reduced to pointed tips. Roll was controlled with wing warping from a conventional control column.^[1]

A 20 kW (27 hp) Rotax 277 single cylinder two-stroke engine in the nose at wing height drove a two-blade propeller, with the cockpit immediately behind. The pilot had a windscreen and behind him the seat back was faired into the short, thin fuselage section between the wing trailing edge and the tail. The vertical tail was kite shaped, with the longer triangular section above the wing and with the rest forming a short ventral fin. The whole rear section was hinged as a conventional rudder. The horizontal surfaces were each triangular and mounted on the fuselage, with the rear sections forming elevators.^[1]

The Eureka had a conventional fixed tail wheel undercarriage, with rubber suspended mainwheels on individual pairs of V-struts and linked by a cross axle. The tail wheel was held below the ventral fin on a long rearward strut from the fuselage. With wings and tail folded, the Eureka could be transported on the luggage rack of a medium-sized saloon car.^[1]

The Eureka was first flown in the early 1980s but its testing development ended when the Swiss government completely banned ultralight flying on the basis of noise pollution. This ban on ultralights was not lifted until 2005.^[2] Only one Eureka was ever built.^[1]

Specifications

Data from Berger and Burr^[1]

General characteristics

Wingspan: 7.30 m (23 ft 11 in)
Wing area: 10.7 m² (115 sq ft)
Aspect ratio: 5.0
Airfoil: NACA 23015 modified
Empty weight: 98 kg (216 lb)
Max takeoff weight: 218 kg (481 lb)
Fuel capacity: 10.0 L (2.2 Imp gal, 2.6 US gal)
Powerplant: 1 × Rotax 277 single cylinder air-cooled two stroke, with maximum power at 6,200 rpm, 20 kW (27 hp)
Propellers: 2-bladed geared down 2.6:1, 1.4 m (4 ft 7 in) diameter

Performance

Maximum speed: 109 km/h (68 mph, 59 kn)
Cruise speed: 80 km/h (50 mph, 43 kn) economical
Stall speed: 50 km/h (31 mph, 27 kn)
Range: 160 km (99 mi, 86 nmi) at average cruise speed
g limits: +6.0, -4.0 recommended
Maximum glide ratio: 6:1 at 70 km/h (44 mph; 38 kn)
Rate of climb: 3.0 m/s (590 ft/min) best, measured at 850 m (2,790 ft), 10°C (50°F)
Wing loading: 20.4 kg/m² (4.2 lb/sq ft)
Power/mass: 92 W/kg (0.056 hp/lb)
Take-off distance: 30 m (100 ft)
Landing distance: 50 m (165 ft)

Related Research Articles

The Civil Aviation Department Revathi was a light utility aircraft designed in India principally for use by that country's flying clubs.

The Murphy JDM-8 is a Canadian single-seat ultralight monoplane designed by Daryl Murphy. The type was intended to be sold as a kit for home construction by Murphy Aircraft of Chilliwack, British Columbia.

The Hy-Tek Hurricane 103 is a family of single-engined, high wing tricycle gear-equipped aircraft that were available in kit form from Hy-Tek Hurricane of Aurora, Oregon.

The Aero-Service Puma is a Polish ultralight aircraft, designed and produced by Aero-Service Jacek Skopiński of Warsaw. The aircraft is supplied complete and ready-to-fly.

The ICP Vimana is a single engine, two seat, high wing, light aircraft with STOL capability. Designed and built in Italy by ICP srl, it was introduced in 2006.

The ICP Savannah is a high-wing, single-engine, ultralight with side-by-side seating for two produced in Italy by ICP srl. It has sold in large numbers, particularly in Europe. The Savannah is in production, sold in both kit and ready-to-fly form.

The Aeroprakt A-20 Vista is a family of Ukrainian tandem two-seat high-wing, strut-braced, pusher configuration conventional landing gear, ultralight aircraft, produced by Aeroprakt. The A-20 was introduced into the North American market at AirVenture 1999.

The Bagalini Bagaliante is an Italian high-wing, strut-braced, single-seat, pusher configuration, conventional landing gear motor glider that was designed by Marino Bagalini and made available as plans for amateur construction.

The Mitchell Wing P-38, also called the Lightning, is an American ultralight aircraft that was designed by Jim Mead and produced by Mitchell Aircraft Corporation. The aircraft was supplied as a kit for amateur construction.

The Jora Jora is a high wing, T-tail, single-engine, two-seat ultralight designed in the Czech Republic in 1993. More than 160 had been sold by 2009.

The Lambert Mission 106 is a conventionally laid out, high-wing ultralight, seating two side-by-side. Designed in Belgium, there are ULM and LSA versions.

The Zlin Savage Cub is one of a series of light sport aircraft similar in construction to the Piper Cub.

The Anglin J6 Karatoo is an Australian ultralight and light-sport aircraft that was designed by Jessie Anglin and introduced in 1982. Over the years the J6 Karatoo has been produced by several different manufacturers, including Amax Engineering of Donvale, Victoria, Skyway Aircraft and is currently built by Serenity Aviation of Australia. The aircraft is supplied as plans or as a kit for amateur construction.

The APEV Pouchel Classic is a French amateur-built aircraft, designed by Daniel Dalby and produced by APEV of Peynier. The aircraft is supplied as plans or as a kit for amateur construction.

The Aviakit Véga is an ultralight aircraft seating two in side-by-side configuration. It was designed in France in the late 1990s to be easily constructed by amateurs from kits and was offered with a choice of three engines and of tricycle or conventional undercarriages.

The Mitchell Wing B-10 is an American high-wing, open cockpit, single-seat ultralight aircraft and motor glider that was designed by Don Mitchell and produced by a variety of companies in the form of kits and plans for amateur construction.

The Bagalini Bagalini is an Italian homebuilt ultralight aircraft that was designed by Marino Bagalini. The aircraft is supplied in the form of plans for amateur construction.

The IIL IS-5 was a single seat, high performance sailplane designed by Iosif Șilimon and built in Romania in 1960.

The Chasle YC-100 Hirondelle (Swallow) is a French single seat microlight designed in the 1980s.

The NAU Black-headed Gull is a Chinese two seat, high wing ultralight first flown in 2011.

References

1 2 3 4 5 Berger, Alain-Yves; Burr, Norman (1985). Ultralight and Microlight Aircraft (2 ed.). Yeovil, Somerset: Haynes Publishing Group. pp. 284–6. ISBN 0-85429-481-3.
↑ "Swiss ultralight ban" (PDF). Retrieved 1 January 2013.

External links

NACA 23015 airfoil

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.

[BB-1] 1 2 3 4 5 Berger, Alain-Yves; Burr, Norman (1985). Ultralight and Microlight Aircraft (2 ed.). Yeovil, Somerset: Haynes Publishing Group. pp. 284–6. ISBN 0-85429-481-3.

[ban-2] "Swiss ultralight ban" (PDF). Retrieved 1 January 2013.