P.V.2 | |
---|---|
Role | Floatplane Fighter |
National origin | United Kingdom |
Manufacturer | Port Victoria Marine Experimental Aircraft Depot |
First flight | 16 June 1916 |
Status | Prototype only |
Number built | 1 |
The Port Victoria P.V.2 was a British prototype floatplane fighter of the First World War, designed and built at the Royal Naval Air Service's Port Victoria Marine Experimental Aircraft Depot on the Isle of Grain. Only a single aircraft was built, with the type not being chosen for production.
The Port Victoria Depot's second design, designated Port Victoria P.V.2 was a floatplane fighter intended to intercept German Zeppelins. The P.V.2 was a small single engined biplane, powered by a Gnome Monosoupape rotary engine driving a four blade propeller. It was of wood and fabric construction, and of sesquiplane configuration, i.e. with its lower wing much smaller than its upper wing (both of which used the high-lift wing sections pioneered by the P.V.1). Unusually, the aircraft's wing bracing struts also carried the aircraft's floats, forming a "W" shape when viewed from the front. The upper wing was attached directly to the top of the fuselage, giving a good field of fire for the intended armament of a single 2-lb Davis gun recoilless gun. [1]
The P.V.2 first flew on 16 June 1916, and demonstrated good performance and handling. The upper wing, however, while giving excellent upwards view to the pilot, gave a poor downwards view of the pilot, particularly during landing, while the Davis gun had lost favour with the Admiralty as an anti-Zeppelin weapon. The P.V.2 was therefore rebuilt as the P.V.2bis with a revised, longer span upper wing mounted 12 inches (0.30 m) above the fuselage and the Davis gun replaced by two Lewis guns mounted above the wing, firing over the propeller. The modified aircraft first flew in this form in early 1917. [2]
While the P.V.2bis again showed excellent handling, the RNAS's requirement for a floatplane anti-Zeppelin fighter had lapsed, and no production was ordered. [2]
Data from The British Fighter since 1912 [1]
General characteristics
Performance
Armament
Related development
The AD Scout was designed by Harris Booth of the British Admiralty's Air Department as a fighter aircraft to defend Britain from Zeppelin bombers during World War I.
The Sopwith Tabloid and Sopwith Schneider (floatplane) were British biplanes, originally designed as sports aircraft and later adapted for military use. They were among the first successful types to be built by the Sopwith Aviation Company. The "Tabloid", so named because of its small size, caused a sensation when it made its first public appearance.
The Blackburn TB was a long-range twin-engined anti-Zeppelin seaplane. It was Blackburn's first multi-engine aircraft to fly.
The Wight Baby was a British single-seat seaplane fighter produced by John Samuel White & Company Limited. Only three prototype aircraft were built.
The Pemberton-Billing P.B.25 was a First World War British single-seat scout aircraft built by Pemberton-Billing Limited, later Supermarine Aviation Works Limited.
The Sopwith Two-Seat Scout was a 1910s British biplane Anti-Zeppelin scout biplane designed and built for the Admiralty by the Sopwith Aviation Company. It was nicknamed the Spinning Jenny due to a tendency to enter a spin.
The Grigorovich M-11 was a Russian single-seat fighter flying boat designed by Dmitry Pavlovich Grigorovich and built by Shchetinin
The Engels MI was a Russian floatplane/fighter developed in 1916. It was a parasol cantilever flying boat with a V-Section hull, and downswept wingtips incorporating flotation chambers.
The Morane-Saulnier AI was a French parasol-wing fighter aircraft produced by Morane-Saulnier during World War I.
The Vickers F.B.12 was a biplane pusher fighter aircraft developed during World War I by Vickers Limited. The failure of the engine for which it was designed, and the obsolescence of the pusher configuration, resulted in its remaining an experimental type only.
The Morane-Saulnier AF, also known as the Morane-Saulnier Type AF and the MoS 28 was a French First World War single-seat biplane fighter prototype from 1917.
The Blackburn Triplane was a single-engine pusher single-seater, designed specifically to attack Zeppelins. It flew in 1917, but was not successful.
The Westland N.1B was a prototype British single-engined floatplane fighter aircraft of the First World War. The first aircraft to be designed by Westland Aircraft, it was a single-engined tractor biplane. Despite good performance, only two aircraft were built, the Royal Naval Air Service operating landplane fighters from ships instead.
The Sage Type 2 was a prototype British two-seat fighter aircraft of the First World War. A single-engined biplane with an enclosed cabin for its crew, only a single example was built, as more advanced aircraft became available.
The Vickers E.F.B.7 was a prototype British fighter aircraft of the First World War. A twin-engined biplane, the E.F.B.7 was unsuccessful, only one being built.
The Vickers E.S.1 was an early British Fighter aircraft of the First World War. A single-seat biplane, only three E.S.1s were built, although at least one was used by a home defence squadron of the Royal Flying Corps.
The Port Victoria P.V.9 was a British single-seat biplane floatplane fighter of the First World War. Although claimed to be the best aircraft of its type yet to be tested, only a single prototype was built.
The Port Victoria P.V.4 was a prototype two-seat reconnaissance floatplane of the First World War. The P.V.4 was a small single engined pusher biplane. It was unsuccessful as the engine it was designed around was a failure and alternatives were unsuitable, only one aircraft being built.
The Port Victoria P.V.5 was a British single-engined floatplane fighter aircraft of the First World War. A single example was built and flown at the Royal Naval Air Service's Port Victoria Marine Experimental Aircraft Depot on the Isle of Grain in 1917. Despite demonstrating good manoeuvrability and handling, no production followed, with the Royal Naval Air Service instead using landplanes for the fighter role.
The SPAD S.XV was a single-seat fighter designed and built in France and offered to fulfil a 1918 C1 specification.