Post-orogenic collapse

Last updated

Post-orogenic collapse (also orogenic collapse, post-orogenic extension, or gravitational collapse), is the thinning and lateral spread of thickened crust under its own weight. This can be a result of overthickening of the crust or the release of tectonic forces. [1] A post-orogenic collapse marks the end of an orogeny, and represents a key phase of the Wilson Cycle, in-between continental collision and rifting. [2]

Contents

Orogens (also known as orogenic belts, or more simply mountain ranges) are built up as crust thickens while tectonic plates collide, in a process known as orogenesis. Once the tectonic forces cease, or the crust becomes unstable, the orogen may begin spreading apart and thinning, ending the orogeny. Orogens can also be destroyed by eduction and erosion, but these processes are not necessarily associated with orogenic collapse. [1] It has been argued that extension during orogenic collapse is a more effective mechanism of lowering mountains than erosion. [3]

There are two primary mechanics in an orogenic collapse: gravitational potential energy and heat flow into the thickened crust, which extends deeper underground. The added weight from the thickened crust causes the surface to sink deeper into the mantle, increasing the heat flow. Additional heat softens the rock, making it flow more easily, which can allow buoyant forces to move material in deeper sections into thinner sections. [4]

Models

Fixed-boundary collapse

A fixed-boundary collapse is the breakdown of the brittle upper crust, and occurs when crust has overthickened while tectonic forces are still active. Flow in the lower crust may or may not occur when this happens. This can lead to exhumation of buried features. [1] [4]

Free-boundary collapse

Free-boundary collapse occurs when tectonic forces have been released and the thickened crust is free to move. This results in both the extension of the surface crust and flow of the lower crust to thinner regions. [1] [4] This type of deformation has been compared to leaving a piece of Camembert cheese out overnight - as the cheese starts to sag and spread, the rind will eventually crack and split. [5]

Examples

Caledonian Orogeny

The Scandinavian Caledonides is an example of an orogeny and mountain chain that reached heights of 8–9 km and then collapsed in the Devonian, forming major extensional structures such as the Nordfjord-Sogn Detachment. [6] The collapse was such that the modern Scandinavian Mountains do not owe their height to the former orogeny but to other processes that occurred in the Cenozoic. [7] [8]

Aegean Sea Plate

The Aegean Sea Plate is a section of continental crust which has been thinned by various processes including orogenic collapse. The northern part of the plate underwent the Aegean Orogeny (c.70 - 14 Ma), followed by orogenic collapse and crustal extension. [9]

Related Research Articles

Orogeny The formation of mountain ranges

Orogeny is the primary mechanism by which mountains are formed on continents. An orogeny is an event that takes place at a convergent plate margin when plate motion compresses the margin. This leads to both structural deformation and compositional differentiation of Earth's lithosphere. An orogenic belt or orogen develops as the compressed plate crumples and is uplifted to form one or more mountain ranges; this involves a series of geological processes collectively called orogenesis. A synorogenic process or event is one that occurs during an orogeny.

Obduction Overthrusting of oceanic lithosphere onto continental lithosphere at a convergent plate boundary

Obduction is a geological process whereby denser oceanic crust are scraped off a descending ocean plate at a convergent plate boundary and thrust on top of an adjacent plate. When oceanic and continental plates converge, normally the denser oceanic crust sinks under the continental crust in the process of subduction. Obduction, which is less common, normally occurs in plate collisions at orogenic belts or back-arc basins.

Tectonic uplift is the geologic uplift of Earth's surface that is attributed to plate tectonics. While isostatic response is important, an increase in the mean elevation of a region can only occur in response to tectonic processes of crustal thickening, changes in the density distribution of the crust and underlying mantle, and flexural support due to the bending of rigid lithosphere.

Orogenic belt Zone affected by mountain formation

An Orogenic belt means a zone affected by orogeny. An orogenic belt develops when a continental plate crumples and is uplifted to form one or more mountain ranges; this involves a series of geological processes collectively called orogenesis.

Continental collision Phenomenon in which mountains are produced on the boundaries of converging tectonic plates

In geology, continental collision is a phenomenon of plate tectonics that occurs at convergent boundaries. Continental collision is a variation on the fundamental process of subduction, whereby the subduction zone is destroyed, mountains produced, and two continents sutured together. Continental collision is only known to occur on Earth.

Grenville orogeny Mesoproterozoic mountain-building event

The Grenville orogeny was a long-lived Mesoproterozoic mountain-building event associated with the assembly of the supercontinent Rodinia. Its record is a prominent orogenic belt which spans a significant portion of the North American continent, from Labrador to Mexico, as well as to Scotland.

Geosyncline

A Geosyncline is an obsolete geological concept to explain orogens, which was developed in the late 19th and early 20th centuries, before the theory of plate tectonics was envisaged. A geosyncline was described as a giant downward fold in the Earth's crust, with associated upward folds called geanticlines, that preceded the climax phase of orogenic deformation.

Sevier orogeny Mountain-building episode in North America

The Sevier orogeny was a mountain-building event that affected western North America from northern Canada to the north to Mexico to the south.

Foreland basin Structural basin that develops adjacent and parallel to a mountain belt

A foreland basin is a structural basin that develops adjacent and parallel to a mountain belt. Foreland basins form because the immense mass created by crustal thickening associated with the evolution of a mountain belt causes the lithosphere to bend, by a process known as lithospheric flexure. The width and depth of the foreland basin is determined by the flexural rigidity of the underlying lithosphere, and the characteristics of the mountain belt. The foreland basin receives sediment that is eroded off the adjacent mountain belt, filling with thick sedimentary successions that thin away from the mountain belt. Foreland basins represent an endmember basin type, the other being rift basins. Space for sediments is provided by loading and downflexure to form foreland basins, in contrast to rift basins, where accommodation space is generated by lithospheric extension.

Basin and range topography Alternating landscape of parallel mountain ranges and valleys

Basin and range topography is characterized by alternating parallel mountain ranges and valleys. It is a result of crustal extension due to mantle upwelling, gravitational collapse, crustal thickening, or relaxation of confining stresses. The extension results in the thinning and deformation of the upper crust, causing it to fracture and create a series of long parallel normal faults. This results in block faulting, where the blocks of rock between the normal faults either subside, uplift, or tilt. The movement of these blocks results in the alternating valleys and mountains. As the crust thins, it also allows heat from the mantle to more easily melt rock and form magma, resulting in increased volcanic activity.

Erosion and tectonics

The interaction between erosion and tectonics has been a topic of debate since the early 1990s. While the tectonic effects on surface processes such as erosion have long been recognized, the opposite has only recently been addressed. The primary questions surrounding this topic are what types of interactions exist between erosion and tectonics and what are the implications of these interactions. While this is still a matter of debate, one thing is clear, the Earth's landscape is a product of two factors: tectonics, which can create topography and maintain relief through surface and rock uplift, and climate, which mediates the erosional processes that wear away upland areas over time. The interaction of these processes can form, modify, or destroy geomorphic features on the Earth's surface.

Aegean Sea Plate A small tectonic plate in the eastern Mediterranean Sea

The Aegean Sea Plate is a small tectonic plate located in the eastern Mediterranean Sea under southern Greece and far western Turkey. Its southern edge is a subduction zone south of Crete, where the African Plate is being swept under the Aegean Sea Plate. To the north is the Eurasian Plate, which is a divergent boundary responsible for the formation of the Gulf of Corinth.

Tectonic subsidence is the sinking of the Earth's crust on a large scale, relative to crustal-scale features or the geoid. The movement of crustal plates and accommodation spaces created by faulting create subsidence on a large scale in a variety of environments, including passive margins, aulacogens, fore-arc basins, foreland basins, intercontinental basins and pull-apart basins. Three mechanisms are common in the tectonic environments in which subsidence occurs: extension, cooling and loading.

Ultra-high-pressure metamorphism refers to metamorphic processes at pressures high enough to stabilize coesite, the high-pressure polymorph of SiO2. It is important because the processes that form and exhume ultra-high-pressure (UHP) metamorphic rocks may strongly affect plate tectonics, the composition and evolution of Earth's crust. The discovery of UHP metamorphic rocks in 1984 revolutionized our understanding of plate tectonics. Prior to 1984 there was little suspicion that continental rocks could reach such high pressures.

Nordfjord-Sogn Detachment

The Nordfjord—Sogn Detachment (NSD) is a major extensional shear zone up to 6 km in thickness, which extends about 120 km along strike from Nordfjord to Sognefjord, bringing Devonian continental coarse clastic sedimentary rocks into close contact with eclogite facies metamorphic rocks of the Western Gneiss Region. It formed towards the end of the Caledonian Orogeny and was mainly active during the Devonian. It has an estimated displacement of at least 70 km and possibly as much as 110 km. It was reactivated during the Mesozoic and may have influenced the development of fault structures in the North Sea rift basin.

In geology, the term exhumation refers to the process by which a parcel of rock, approaches Earth's surface.

Svecofennian orogeny Series of related orogenies that resulted in the formation of much of the continental crust in what is today Sweden and Finland plus some minor parts of Russia

The Svecofennian orogeny is a series of related orogenies that resulted in the formation of much of the continental crust in what is today Sweden and Finland plus some minor parts of Russia. The orogenies lasted from about 2000 to 1800 million years ago during the Paleoproterozoic Era. The resulting orogen is known as the Svecofennian orogen or Svecofennides. To the west and southwest the Svecofennian orogen limits with the generally younger Transscandinavian Igneous Belt. It is assumed that the westernmost fringes of the Svecofennian orogen have been reworked by the Sveconorwegian orogeny just as the western parts of the Transscandinavian Igneous Belt has. The Svecofennian orogeny involved the accretion of numerous island arcs in such manner that the pre-existing craton grew with this new material from what is today northeast to the southwest. The accretion of the island arcs was also related to two other processes that occurred in the same period; the formation of magma that then cooled to form igneous rocks and the metamorphism of rocks.

The Hellenic orogeny is a collective noun referring to multiple mountain building events that shaped the topography of the southern margin of Eurasia into what is now Greece, the Aegean Sea and western Turkey, beginning in the Jurassic. Prior to then the supercontinent, Pangaea, had divided along a divergent boundary into two continents, Gondwana land and Laurasia, separated by a primordial ocean, Paleo-Tethys Ocean. As the two continents continued to break up, Gondwana, pushed by divergent boundaries developing elsewhere, began to drift to the north, closing the sea. As it went it split off a number of smaller land masses, terranes, which preceded it to the north. The Hellenic orogeny is the story of the collision first of these terranes and then of Gondwana, reduced to Africa, with Eurasia, and the closing of Tethys to the Mediterranean. The process has been ongoing since the Jurassic and continues today.

Hornelen Basin

The Hornelen Basin is a sedimentary basin in Vestland, Norway, containing an estimated 25 km stratigraphic thickness of coarse clastic sedimentary rocks of Devonian age. It forms part of a group of basins of similar age along the west coast of Norway between Sognefjord and Nordfjord, related to movement on the Nordfjord-Sogn Detachment. It formed as a result of extensional tectonics as part of the post-orogenic collapse of crust that was thickened during the Caledonian Orogeny towards the end of the Silurian period. It is named for the mountain Hornelen on the northern margin of the basin.

Solund Basin

The Solund Basin is a sedimentary basin containing at least 6 km of mainly coarse conglomerates of Devonian age. It is the southernmost of a group of basins of similar age found along the southwest coast of Norway between Sognefjord and Nordfjord, developed in the hanging-wall of the Nordfjord-Sogn Detachment. It was formed as a result of extensional tectonics during the post-orogenic collapse of crust thickened during the Caledonian orogeny, towards the end of the Silurian period. It is named for the municipality of Solund in Vestland.

References

  1. 1 2 3 4 Adamuszek, Marta (2013-07-28). "Lecture - Orogenic Collapse".
  2. Dai, Liming; Li, Sanzhong; Li, Zhong-Hai; Somerville, Ian; Liu, Xiaochun (2018-02-09). "Post-orogenic unrooting and collapse". www.mantleplumes.org. Archived from the original on 2021-12-10. Retrieved 2021-12-10.
  3. Dewey, J.F.; Ryan, P.D.; Andersen, T.B. (1993). "Orogenic uplift and collapse, crustal thickness, fabrics and metamorphic phase changes: the role of eclogites". Geological Society, London, Special Publications. 76 (1): 325–343. doi:10.1144/gsl.sp.1993.076.01.16.
  4. 1 2 3 Selverstone, Jane (May 2005). "Are the Alps collapsing?". Annual Review of Earth and Planetary Sciences. 33: 113–132 via ResearchGate.
  5. Nance, Damian (2014-03-24). "What is Orogenic Collapse?". Oxford University Press.
  6. Johnston S., Hacker B.R. & Ducea M.N. (2007). "Exhumation of ultrahigh-pressure rocks beneath the Hornelen segment of the Nordfjord-Sogn Detachment Zone, western Norway" (PDF). Bulletin of the Geological Society of America. 119 (9–10): 1232–1248. doi:10.1130/B26172.1.
  7. Gabrielsen, Roy H.; Faleide, Jan Inge; Pascal, Christophe; Braathen, Alvar; Nystuen, Johan Petter; Etzelmuller, Bernd; O'Donnel, Sejal (2010). "Latest Caledonian to Present tectonomorphological development of southern Norway". Marine and Petroleum Geology . 27: 709–723. doi:10.1016/j.marpetgeo.2009.06.004.
  8. Green, Paul F.; Lidmar-Bergström, Karna; Japsen, Peter; Bonow, Johan M.; Chalmers, James A. (2013). "Stratigraphic landscape analysis, thermochronology and the episodic development of elevated, passive continental margins". Geological Survey of Denmark and Greenland Bulletin . 30: 18. Archived from the original on 24 September 2015. Retrieved 30 April 2015.
  9. Searle, Michael P.; Lamont, Thomas N. (2020-03-03). "Compressional origin of the Aegean Orogeny, Greece". Geoscience Frontiers (published 2020-08-07). doi:10.1016/j.gsf.2020.07.008 via ScienceDirect.