A quickshifter or quick shifter is a device that eliminates the need to use the clutch or throttle when shifting gears on a manual transmission. This can increase the safety and comfort of the vehicle [1] and allow for faster gear shifting (usually shifting in less than 50 milliseconds) and is thus a popular performance enhancement for motorcycles. [2]
Almost all quickshifters for upshifts on motorcycles work on the same basis: a microcontroller detects the gear shift action via a sensor, calculates the shift timing, and momentarily cuts off the ignition, resulting in a reduction of the load at the transmission allowing the engine speed to match the transmission speed of the next gear and permit the gear to slip (and engage) into place. However, the method of sensing and reducing the load can vary. [1] [2]
Typically, the sensor is mounted in a way that it is a functional part of the gear shift linkage. The shift action by the rider, results in an actuation force on the sensor. Depending on the shift linkage design the sensor specifically reacts either on a push or pull action.
Mechanical, linear, sensors typically close a micro switch at a factory preset force level in one particular direction only.
A more versatile sensor design uses a strain gauge to measure the level of the applied force in either direction. The design is typically linear (rod mounted) but can also be rotative (axle mounted). A dedicated micro controller, either purposely part of the sensor system alone or fully integrated in a quick shift module, normally has the flexibility to both set the required upshift direction (push / pull) and force sensitivity to detect the correct shift moment. In comparison with the mechanical type these relevant features ensure a more accurate, error free, shift detection for after-market applications, depending on rider preference, use case and, set correctly, reduce wear on the transmission gear selection system. Electronic sensor designs may be more complex and expensive but other than the above-mentioned advantages, may also be more reliable due to having no moving parts.
The control module generally intervenes on the ignition and/or fuel supply to reduce the load on the transmission while shifting. Often an after-market stand-alone module, separate from the engine control unit (ECU), is used on older motorcycles. On modern motorcycles the engine management ECU itself performs the required calculations for the intervention. They can provide a near-perfect gear shift in tens of milliseconds.
The load on the transmission is generally reduced (or "unloaded") by cutting off the ignition and/or fuel supply of the engine, or by disengaging the clutch. After the shift is completed, the engine torque i.e., load needs to return to the level prior to the shift to continue accelerating. To avoid a hard shock reaction on the chain drive, stand-alone modules can activate the cut cylinders in a staggered, controlled manner. To achieve this at least two separate control channels are required. Since the engine load is both reduced and reinstated in a precise and controlled manner (if tuned correctly) by the microcontroller, using a quickshifter is less damaging to the transmission than clutchless gear shifting without a quickshifter. [3]
A bi-directional quickshifter is a quickshifter that works on both directions of gearshift - upshifts and downshifts. [4] Most quickshifters are bi-directional (sometimes called auto blippers [5] ), so the term quickshifter alone is usually sufficient, however, "mono-directional" quickshifters that only work in one direction exist, like the "Kawasaki Quick Shifter" (KQS) on the 2016 Kawasaki Ninja ZX-10R and the 2015 H2/R, which works only for upshifting. [6]
Examples of performance-oriented motorcycles using a bi-directional quickshifter are the BMW S1000RR and S1000R, 2017 ZX-10R and H2/R, Suzuki GSX-R1000/R, Aprilia Tuono, KTM Duke 390 etc. [7] [8] [9] [10]
The Kawasaki Ninja ZX-12R is a motorcycle in the Ninja sport bike series made by Kawasaki from 2000 through 2006. The 1,199 cc (73.2 cu in) inline-four engine produced 178 hp (133 kW) at low speed, and increased to 190 hp (140 kW) at high speed due to its ram-air intake, making it the most powerful production motorcycle up to 2006 and the release of the ZX-14. It was a contender to be the fastest production motorcycle, and played a role in bringing to a truce the escalating competition to build an ever-faster motorcycle. Its top speed was electronically limited to 186 mph (300 km/h), tying it with the Suzuki Hayabusa and Kawasaki Ninja ZX-14 as the fastest production motorcycle on the market, after the 303–312 km/h (188–194 mph) 1999 Hayabusa was replaced with a speed-limited version as part of a gentlemen's agreement between motorcycle manufacturers that lasted until the 298–311 km/h (185.4–193.24 mph) 2007 MV Agusta F4 R 312.
A semi-automatic transmission is a multiple-speed transmission where part of its operation is automated, but the driver's input is still required to launch the vehicle from a standstill and to manually change gears. Semi-automatic transmissions were almost exclusively used in motorcycles and are based on conventional manual transmissions or sequential manual transmissions, but use an automatic clutch system. But some semi-automatic transmissions have also been based on standard hydraulic automatic transmissions with torque converters and planetary gearsets.
The Kawasaki Ninja ZX-10R is a motorcycle in the Ninja sport bike series from the Japanese manufacturer Kawasaki, the successor to the Ninja ZX-9R. It was originally released in 2004 and has been updated and revised throughout the years. It combines an ultra-narrow chassis, low weight, and radial brakes. In 2004 and 2005 the ZX-10R won Best Superbike from Cycle World magazine, and the international Masterbike competition.
The Kawasaki Ninja ZX-6R is a 636 cc class motorcycle in the Ninja sport bike series from the Japanese manufacturer Kawasaki. It was introduced in 1995, and has been constantly updated throughout the years in response to new products from Honda, Suzuki, and Yamaha. The ZX series is what was known as the Ninja line of Kawasaki motorcycles in the 1980s and still carries the name today.
The ZZR1400 or Kawasaki Ninja ZX-14 and ZX-14R (2006–2022), is a motorcycle in the Ninja sport bike series from the Japanese manufacturer Kawasaki that was their most powerful sport bike as of 2006. It was introduced at the 2005 Tokyo Motor Show and released for the 2006 model year as a replacement for the Kawasaki ZZ-R1200 (2002-2005). The ZZR1400 is capable of accelerating from 0–60 mph in 2.5 seconds. The top speed is electronically limited to 186 mph (299 km/h) as a result of an agreement between the major Japanese and European motorcycle manufacturers.
A sport touring motorcycle is a type of motorcycle that combines the performance of a sport bike with the long-distance capabilities and comfort of a touring motorcycle.
A transmission control unit (TCU), also known as a transmission control module (TCM), or a gearbox control unit (GCU), is a type of automotive ECU that is used to control electronic automatic transmissions. Similar systems are used in conjunction with various semi-automatic transmissions, purely for clutch automation and actuation. A TCU in a modern automatic transmission generally uses sensors from the vehicle, as well as data provided by the engine control unit (ECU), to calculate how and when to change gears in the vehicle for optimum performance, fuel economy and shift quality.
The Kawasaki Ninja is a name given to several series of Kawasaki sport bikes that started with the 1984 GPZ900R. Kawasaki Heavy Industries trademarked a version of the word Ninja in the form of a wordmark, a stylised script, for use on "motorcycles and spare parts thereof".
The Kawasaki Ninja ZX-9R is a motorcycle in the Ninja sport bike series from Japanese manufacturer Kawasaki, produced from 1994 until 2003. There were five model incarnations across two basic designs.
The Aprilia Tuono is a naked motorcycle manufactured by Aprilia from 2002. It is based on the Aprilia RSV Mille. Its successor, the Aprilia RSV1000R superbike shares its engine, gearbox, frame and, partly, its suspension. The Tuono was succeeded by the Aprilia Tuono V4 R for model year 2011, though the V2 model continued in production into the 2011 model year.
The Kawasaki Ninja 1000 SX is a motorcycle in the Ninja series from the Japanese manufacturer Kawasaki sold since 2011. Other than its name, it is unrelated to the Ninja 1000R produced from 1986–89, or to other Ninja motorcycles.
A motorcycle transmission is a transmission created specifically for motorcycle applications. They may also be found in use on other light vehicles such as motor tricycles and quadbikes, go-karts, offroad buggies, auto rickshaws, mowers, and other utility vehicles, microcars, and even some superlight racing cars.
The Kawasaki Ninja H2 is a supercharged four-stroke supersport-class motorcycle in the Ninja sports bike series manufactured by Kawasaki, featuring a variable-speed centrifugal supercharger.
MotoAmerica is the organization that promotes the AMA Superbike Series since 2015. Sanctioned by the American Motorcyclist Association (AMA) and the Fédération Internationale de Motocyclisme (FIM), it features six classes of road racing: Superbike, Stock 1000, Supersport, Twins Cup, Junior Cup, and Mini Cup.
Float shifting or floating gears, also called "slip shifting", "dead sticking", or "bang shifting", is the process of changing gears, in typically a non-synchronous transmission, without depressing the clutch. Shifting in this manner is also used with synchronous manual transmissions, particularly after a clutch failure, to prevent destroying the synchromeshes with the power of the engine.
India Kawasaki Motors Private Limited (IKM) is an Indian motorcycle retailer. It was established in May 2010 in Pune, Maharashtra, as a wholly owned subsidiary of Kawasaki Heavy Industries Motorcycle & Engine, Japan Ltd. for imports and sales of motorcycles. Kawasaki made a technical assistance agreement with Bajaj Auto Ltd. in 1984, and cooperated to expand production and sales of motorcycles in India. In November 2016 India Kawasaki Motors decided to break ties with Bajaj Auto Ltd. for sales and service from April 2017 and sell its motorcycles through its own network.
The 2020 MotoAmerica Championship was the 6th season of the MotoAmerica Championship.