RCAF Station Yorkton

RCAF Station Yorkton
RCAF Station Yorkton
Near Yorkton, Saskatchewan in Canada
	RCAF Station Yorkton
Coordinates	51°16′N102°27′W / 51.267°N 102.450°W Coordinates: 51°16′N102°27′W / 51.267°N 102.450°W
Site information
Owner	Dept of National Defence
Operator	Formerly Royal Canadian Air Force
Site history
Built	1940
In use	1941-1945
Fate	Yorkton Municipal Airport
Garrison information
Past; commanders	G/C George R. Howsam
Garrison	No. 11 SFTS (1941-1944); No. 23 EFTS (1945)
Airfield information
Identifiers	IATA: none, ICAO: none
Elevation	1,619 ft (493 m) AMSL
Runways
8/26	3,850 ft (1,170 m) hard surfaced
8/26	3,200 ft (980 m) hard surfaced
3/21	2,720 ft (830 m) hard surfaced
3/21	2,720 ft (830 m) hard surfaced
12/30	2,720 ft (830 m) hard surfaced
12/30	2,720 ft (830 m) hard surfaced
17/35	2,720 ft (830 m) hard surfaced
17/35	2,720 ft (830 m) hard surfaced
	Airfields

Last updated October 14, 2021

RCAF Station Yorkton was a Second World War air training station located near Yorkton, Saskatchewan, Canada.

History

World War II

The Royal Canadian Air Force (RCAF), opened No. 11 Service Flying Training School (SFTS) at RCAF Station Yorkton on 10 April 1941. No. 11 SFTS was closed on 1 December 1944 and the following month No. 23 Elementary Flying Training School (EFTS) was relocated to Yorkton from RCAF Station Davidson on 29 January 1945. No. 23 EFTS was closed 15 August 1945. The schools and station were a component of the British Commonwealth Air Training Plan. The station was decommissioned shortly thereafter.^[1]

Construction of the station began in 1940. The facility was opened on June 11, 1941, and the first commander was Group Captain George R. Howsam. The school consisted of 40 buildings, including a mess hall, a 35-bed hospital, and hangars to shelter 200 planes.^[2]

Aerodrome information

The airfield was constructed in a typical BCATP wartime pattern, with six runways formed in an overlaid triangle. The aerodrome in Yorkton, however, had two additional runways running roughly north–south on the east side of the overlaid triangle.

In approximately 1942 the aerodrome was listed as RCAF Aerodrome - Yorkton, Saskatchewan at 51°16′N102°27′W / 51.267°N 102.450°W / 51.267; -102.450 with a variation of 16 degrees east and elevation of 1,619 feet (493 m). Eight runways were listed as follows: ^[3]

Runway name	Length	Width	Surface
8/26	3,850 ft (1,170 m)	100 ft (30 m)	Hard surfaced
8/26	3,200 ft (980 m)	100 ft (30 m)	Hard surfaced
3/21	2,720 ft (830 m)	100 ft (30 m)	Hard surfaced
3/21	2,720 ft (830 m)	100 ft (30 m)	Hard surfaced
12/30	3,000 ft (910 m)	100 ft (30 m)	Hard surfaced
12/30	3,300 ft (1,000 m)	100 ft (30 m)	Hard surfaced
17/35	2,600 ft (790 m)	150 ft (46 m)	Hard surfaced
17/35	2,160 ft (660 m)	100 ft (30 m)	Hard surfaced

Relief landing field – Sturdee

The primary Relief Landing Field (R1) for RCAF Station Yorkton was located approximately 6 miles south-east. The site was located approximately 1 mile south of the unincorporated community of Calley, Saskatchewan. The Relief field was laid out in the standard triangular pattern.

In approximately 1942 the aerodrome was listed as RCAF Aerodrome - Sturdee, Saskatchewan at 51°12′N102°22′W / 51.200°N 102.367°W / 51.200; -102.367 with a variation of 16 degrees east and elevation of 1,665 feet (507 m). Three runways were listed as follows:

^[4]

Runway name	Length	Width	Surface
1/19	2,700 ft (820 m)	100 ft (30 m)	Hard
13/31	2,700 ft (820 m)	100 ft (30 m)	Hard
7/25	2,700 ft (820 m)	100 ft (30 m)	Hard

A review of Google Maps on 11 June 2018 shows a clear outline of a triangular aerodrome about 1/2 a mile south of the posted coordinates.

Relief landing field – Rhein

The secondary Relief Landing Field (R2) for RCAF Station Yorkton was located approximately 12 miles north-east. The site was located approximately 3.5 miles south of the community of Rhein, Saskatchewan. The Relief field was turf with a triangular runway layout.

In approximately 1942 the aerodrome was listed as RCAF Aerodrome - Rhein, Saskatchewan at 51°18′N102°10′W / 51.300°N 102.167°W / 51.300; -102.167 with a variation of 16 degrees east and elevation of 1,691 feet (515 m). Three runways were listed as follows: ^[5]

Runway name	Length	Width	Surface
2/20	3,500 ft (1,100 m)	800 ft (240 m)	Turf
13/31	3,500 ft (1,100 m)	800 ft (240 m)	Turf
8/26	3,500 ft (1,100 m)	800 ft (240 m)	Turf

A review of Google Maps on 11 June 2018 shows no identifiable trace of the former aerodrome in the vicinity of the posted coordinates.

Post-war

Current status

From a survey of the location on Google Maps on 11 June 2018 it appears that all but two of the original eight runways have been removed. One of the 3/21 runways has been lengthened. One of the 12/30 runways is still in use but is listed as gravel/asphalt. The airport is currently operated at the Yorkton Municipal Airport.

Related Research Articles

RCAF Station Aylmer was a Royal Canadian Air Force airfield that was built between late 1940 and June 1941 northeast of Aylmer, Ontario. It was one of many built across Canada under the British Commonwealth Air Training Plan during World War II.

RCAF Station Vulcan, also referred to as RCAF Aerodrome Vulcan, was a Second World War flying training station located southwest of the town of Vulcan, Alberta, Canada. It was one of many stations that were established in Canada under the British Commonwealth Air Training Plan.

RCAF Station Kingston was a World War II air training station built in 1940 at Collins Bay near Kingston, Ontario, Canada. The station was originally built by the Royal Canadian Air Force (RCAF) for use by the Royal Air Force (RAF). Like other RAF schools in Canada, it was subject to RCAF administrative and operational control.

RCAF Station Claresholm was initially a British Commonwealth Air Training Plan station that trained pilots for World War II service. The station was located near Claresholm, Alberta, Canada.

RCAF Station Saskatoon was a World War II British Commonwealth Air Training Plan (BCATP) base operated by the Royal Canadian Air Force (RCAF). It was located North of the City of Saskatoon, Saskatchewan, Canada.

RCAF Station Fort Macleod was a World War II British Commonwealth Air Training Plan (BCATP) flying training station. Administrative and operational control was the responsibility of the Royal Canadian Air Force (RCAF). The old station is located south of Fort Macleod, Alberta, Canada.

North Battleford Airport is located 1.5 nautical miles east of North Battleford, Saskatchewan, Canada.

North Battleford/Hamlin Airport~~(TC LID: CJD4)~~ was located 1 nautical mile northeast of Hamlin, Saskatchewan, Canada.

Swift Current Airport is located 4 nautical miles east of Swift Current, Saskatchewan, Canada.

Several air force stations and other establishments, many of them training facilities, operated in Calgary, Alberta, Canada from the mid-1930s to the mid-1960s.

Buttress was built in 1940 as the relief landing field for RCAF Station Moose Jaw and Royal Air Force's, No. 32 Service Flying Training School that was stationed there. These fields were used for practice circuits and also as an emergency alternate landing field.

RCAF Station Carberry was a Second World War air training station located near Carberry, Manitoba, Canada.

RCAF Station Souris was a Second World War British Commonwealth Air Training Plan (BCATP) station located near Souris, Manitoba, Canada. It was operated and administered by the Royal Canadian Air Force (RCAF).

RCAF Station Assiniboia was a Second World War British Commonwealth Air Training Plan (BCATP) flying training station located near Assiniboia, Saskatchewan, Canada. It was operated and administered by the Royal Canadian Air Force (RCAF).

RCAF Station Gimli was an air station of the Royal Canadian Air Force (RCAF) located near Gimli, Manitoba, Canada.

RCAF Station Estevan was a World War II, British Commonwealth Air Training Plan (BCATP) base operated by the Royal Canadian Air Force (RCAF). It was located South of the City of Estevan, Saskatchewan, Canada.

RCAF Station Davidson was a Second World War air training station located near Davidson, Saskatchewan, Canada.

RCAF Station Caron was a Second World War British Commonwealth Air Training Plan (BCATP) station located near Caron, Saskatchewan, Canada. It was operated and administered by the Royal Canadian Air Force (RCAF).

References

↑ Hatch, F. J. (1983). The Aerodrome of Democracy: Canada and the British Commonwealth Air Training Plan, 1939-1945. Ottawa: Directorate of History, Department of National Defence. ISBN 0660114437.
↑ The Encyclopedia of Saskatchewan
↑ Staff writer (c. 1942). Pilots Handbook of Aerodromes and Seaplane Bases Vol. 2. Royal Canadian Air Force. p. 70.
↑ Staff writer (c. 1942). Pilots Handbook of Aerodromes and Seaplane Bases Vol. 2. Royal Canadian Air Force. p. 64.
↑ Staff writer (c. 1942). Pilots Handbook of Aerodromes and Seaplane Bases Vol. 2. Royal Canadian Air Force. p. 61.

External links

Bruce Forsyth's Canadian Military History Page

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.

[hatch-1] Hatch, F. J. (1983). The Aerodrome of Democracy: Canada and the British Commonwealth Air Training Plan, 1939-1945. Ottawa: Directorate of History, Department of National Defence. ISBN 0660114437.

[2] The Encyclopedia of Saskatchewan

[Handbook-3] Staff writer (c. 1942). Pilots Handbook of Aerodromes and Seaplane Bases Vol. 2. Royal Canadian Air Force. p. 70.

[Handbook1-4] Staff writer (c. 1942). Pilots Handbook of Aerodromes and Seaplane Bases Vol. 2. Royal Canadian Air Force. p. 64.

[Handbook2-5] Staff writer (c. 1942). Pilots Handbook of Aerodromes and Seaplane Bases Vol. 2. Royal Canadian Air Force. p. 61.

[1]

[2]

[3]

[4]

[5]