RKM engine

Last updated October 19, 2024

A simple RKM rotary engine RKM-animated.gif — A simple RKM rotary engine

The Rotary Piston Machine (German : Rotationskolbenmaschine (RKM)) is a proposed (still in development) form of machine. It can be used either to transform pressure into rotational motion (an engine), or the converse - rotational motion into pressure (pump). It is still in development, but has possible applications in fields requiring oil, fuel or water pumps, as well as pumps for non-abrasive fluids when moderate or high pressure is required. For instance: Hydraulics, fluid and gas transport systems, presses, fuel injection, irrigation, heating systems, hydraulic lifts, water jet engines, hydro- and pneumatic engines, and medical pumps.^[1] The machine's inventor is Boris I. Schapiro, along with co-inventors Lev B. Levitin and Naum Kruk.

Design

All versions of the RKM incorporate a working chamber formed by smoothly conjugated circular arcs. The piston, shaped to conform to the chamber's walls, "jumps" from wall to wall, thus performing a rotary motion. The piston has an appropriately shaped aperture fitted with a gear structure, and this drives the power shaft (or two power shafts in some models).

The piston, its aperture and the working chamber of the RKMs represent, in their cross sections, multi-oval figures which, mathematically, are related to the class of figures of equal width. Those multi-ovals are non-analytical figures with a discontinuous second derivative of the contour line (the curvature). Hence, generally speaking, the trajectories of their centers of curvature are also non-analytical and, within the RKMs' geometry, have to have singular points.

In relation to the piston, the trajectory of the power shaft axis has corner points, which correspond to extreme positions of the piston as related to the working chamber. Those corners, which represent singular points of the power shaft's trajectory, cannot be avoided or rounded to provide for the kinematically closed functioning of the gear.

The reason why until now the geometry of curves of constant width could not be put to practical use in the gear design is that no conventional gear structure with the regular rolling on of the gears would permit the exact rolling-on of the singularities. The RKMs solve this problem by introducing the inversely conjugated gear system, which makes it possible to have singular trajectories of the axes of rolling-on gears and, thus, allows the transfer of the angular momentum during the passage of the piston through its stop positions.^[2]

In simple words, the gear mechanism introduces corrections to the piston's motion, correcting the axis of rotation as it leaves the stop positions, so as to create a smooth motion.

Possible configurations

In theory, there is no limit to the number of "sides" that a working chamber may have. However, in practice, it is likely that configurations incorporating no more than seven arcs will be used.

In addition, there can be either one or two power shafts in the aperture in the center of the piston.

Of course, the exact configuration of every model depends upon its use. For instance, internal combustion engines would include injection valves and after-burning chambers. These, however, are not part of the RKM concept.

Applications

Potential areas of application for the RKM engines include:^[3]

Pumps: medium-, high-pressure, and pre-vacuum pumps for use in power machinery, refrigerators, elevators, lifts, cranes, road-building machinery, automobiles, aircraft, and other applications, including those for domestic water and heating systems, and scientific research.
Compressors: medium- and high-pressure compressors for a wide range of industrial and consumer applications.
"Cold" motors: hydraulic and pneumatic motors for use in automobiles, air-, space- and marine craft, and in a number of other applications in industrial and consumer products.
Power tools: a new class of power tools for drilling, cutting and surface treatment of materials in various ranges (from super-large to micrometre).
Internal and external combustion engines, including Diesel, for all types of wheeled or tracked motor vehicles (from motorbikes to automobiles and trucks, to Mars explorers), marine craft of all sizes (from pleasure boats to supertankers), helicopters and propeller-driven aircraft (including super-light platforms).
Electric power generators for agriculture and industry, including oil and gas production, air & space industry, large stationary and vehicular power generators, compact emergency generators, etc.
Compact sources of electrical power for portable computers and other electronic devices, etc.

One area where RKMs offer very high potential is in the pump market. RKM pumps can be as, or more efficient than today's preferred pump technologies, while offering overall advantages in pricing, size, reliability and energy efficiency.^[4]

Comparison to the Wankel engine

Despite their apparent geometrical similarity, the RKM and the Wankel engine are quite different in design.^[1] The main similarities between them are the shape of the working chamber and the use of rotary motion.

However, there are many differences between the two. The Wankel engine working chamber is mobile while the RKM chamber is stationary. The axis of rotation in the Wankel engine moves in a circle while that of the RKM is fixed (in the single power shaft version, temporarily with two possible positions). In the RKM motor, the ignition takes place in a compact recess, while the Wankel's is in the work chamber itself. The RKM's sealing elements are in surface contact with the work chamber and pistons, as opposed to the Wankel's line contact. This makes for a number of advantages of the RKM motor over the Wankel:^[4]

Easier adaptation to diesel fuel.^{[ citation needed ]}
Support of forced afterburning of gases, which is not feasible with the Wankel geometry.^{[ citation needed ]}
Longer life, lower fuel consumption and higher efficiency.^{[ citation needed ]}

One application that the two may indeed have in common is miniaturization. A miniature Wankel engine has been successfully constructed,^[5] and it stands to reason that the same can be done for an RKM.^[1]

Although developed in the 1960s, today there are no runnable RKM engine demonstrated.

Related Research Articles

<span class="mw-page-title-main">Engine</span> Machine that converts one or more forms of energy into mechanical energy (of motion)

An engine or motor is a machine designed to convert one or more forms of energy into mechanical energy.

<span class="mw-page-title-main">Wankel engine</span> Combustion engine using an eccentric rotary design

The Wankel engine is a type of internal combustion engine using an eccentric rotary design to convert pressure into rotating motion. The concept was proven by German engineer Felix Wankel, followed by a commercially feasible engine designed by German engineer Hanns-Dieter Paschke. The Wankel engine's rotor, which creates the turning motion, is similar in shape to a Reuleaux triangle, with the sides having less curvature. The rotor spins inside a figure-eight-like epitrochoidal housing around a fixed-toothed gearing. The midpoint of the rotor moves in a circle around the output shaft, rotating the shaft via a cam.

The Brayton cycle, also known as the Joule cycle, is a thermodynamic cycle that describes the operation of certain heat engines that have air or some other gas as their working fluid. It is characterized by isentropic compression and expansion, and isobaric heat addition and rejection, though practical engines have adiabatic rather than isentropic steps.

A compressor is a mechanical device that increases the pressure of a gas by reducing its volume. An air compressor is a specific type of gas compressor.

The Sarich orbital engine is a type of internal combustion engine, invented in 1972 by Ralph Sarich, an engineer from Perth, Australia, which features orbital rather than reciprocating motion of its central piston. It differs from the conceptually similar Wankel engine by using a generally prismatic shaped piston that orbits the axis of the engine, without rotation, rather than the rotating trilobular rotor of the Wankel.

<span class="mw-page-title-main">Reed valve</span> Type of check valve

Reed valves are a type of check valve which restrict the flow of fluids to a single direction, opening and closing under changing pressure on each face. Modern versions often consist of flexible metal or composite materials.

A pneumatic motor, or compressed-air engine, is a type of motor which does mechanical work by expanding compressed air. Pneumatic motors generally convert the compressed-air energy to mechanical work through either linear or rotary motion. Linear motion can come from either a diaphragm or piston actuator, while rotary motion is supplied by either a vane type air motor, piston air motor, air turbine or gear type motor.

Turbomachinery, in mechanical engineering, describes machines that transfer energy between a rotor and a fluid, including both turbines and compressors. While a turbine transfers energy from a fluid to a rotor, a compressor transfers energy from a rotor to a fluid. It is an important application of fluid mechanics.

Reciprocating motion, also called reciprocation, is a repetitive up-and-down or back-and-forth linear motion. It is found in a wide range of mechanisms, including reciprocating engines and pumps. The two opposite motions that comprise a single reciprocation cycle are called strokes.

An axial engine is a type of reciprocating engine with pistons arranged around an output shaft with their axes parallel to the shaft. Barrel refers to the cylindrical shape of the cylinder group whilst the Z-crank alludes to the shape of the crankshaft.

An axial piston pump is a positive displacement pump that has a number of pistons in a circular array within a cylinder block.

A swing-piston engine is a type of internal combustion engine in which the pistons move in a circular motion inside a ring-shaped "cylinder", moving closer and further from each other to provide compression and expansion. Generally two sets of pistons are used, geared to move in a fixed relationship as they rotate around the cylinder. In some versions the pistons oscillate around a fixed center, as opposed to rotating around the entire engine. The design has also been referred to as a oscillating piston engine, vibratory engine when the pistons oscillate instead of rotate, or toroidal engine based on the shape of the "cylinder".

A gerotor is a positive displacement pump. The name gerotor is derived from "generated rotor." A gerotor unit consists of an inner and an outer rotor. The inner rotor has n teeth, while the outer rotor has n + 1 teeth, with n defined as a natural number greater than or equal to 2. The axis of the inner rotor is offset from the axis of the outer rotor and both rotors rotate on their respective axes. The geometry of the two rotors partitions the volume between them into n different dynamically-changing volumes. During the assembly's rotation cycle, each of these volumes changes continuously, so any given volume first increases, and then decreases. An increase creates a vacuum. This vacuum creates suction, and hence, this part of the cycle is where the inlet is located. As a volume decreases, compression occurs. During this compression period, fluids can be pumped or, if they are gaseous fluids, compressed.

The following outline is provided as an overview of and topical guide to machines:

Angelo Di Pietro is an engine designer who developed the Di Pietro Motor air engine.

The X-engine is a type of pistonless rotary engine manufactured by LiquidPiston of Bloomfield, Connecticut.

A free-piston engine is a linear, 'crankless' internal combustion engine, in which the piston motion is not controlled by a crankshaft but determined by the interaction of forces from the combustion chamber gases, a rebound device and a load device.

Internal combustion engines come in a wide variety of types, but have certain family resemblances, and thus share many common types of components.

A cam engine is a reciprocating engine where instead of the conventional crankshaft, the pistons deliver their force to a cam that is then caused to rotate. The output work of the engine is driven by this cam.

An internal combustion engine is a heat engine in which the combustion of a fuel occurs with an oxidizer in a combustion chamber that is an integral part of the working fluid flow circuit. In an internal combustion engine, the expansion of the high-temperature and high-pressure gases produced by combustion applies direct force to some component of the engine. The force is typically applied to pistons, turbine blades, a rotor, or a nozzle. This force moves the component over a distance. This process transforms chemical energy into kinetic energy which is used to propel, move or power whatever the engine is attached to.

References

1 2 3 Schapiro, B., "The RKM Rotary Piston Maschines" In: Vernetzte Wissenschaften, Eds: Peter Jörg Plath und Ernst-Christoph Haß, Logos Verlag, Berlin 2008
↑ RKM's – Rotating Piston Machines – Scientific and Technical Comments Archived 2008-10-11 at the Wayback Machine
↑ RKM's – Rotating Piston Machines – Project Summary
1 2 Schapiro, B. and Terlitsky, L., "The RKM (RKM) Rotary Piston Machines with the Jumping Momentously Axis", Proceedings of the International Conference on Sustainable Automotive Technologies 2008 (ICSAT2008), 4th to 9th November 2008 in Melbourne, Australia
↑ Fu, K., Knobloch, A., Cooley, B., Walther, D., Fernandez-Pello, A. C., Liepmann, D., and Miyasaka, K., Microscale Combustion Research for Applications to MEMS Rotary IC Engine, Proc. 2001 National Heat Transfer Conference, Anaheim, CA, June 10–12, 2001.

External links

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.

[RKMArticle-1] 1 2 3 Schapiro, B., "The RKM Rotary Piston Maschines" In: Vernetzte Wissenschaften, Eds: Peter Jörg Plath und Ernst-Christoph Haß, Logos Verlag, Berlin 2008

[SiteComm-2] RKM's – Rotating Piston Machines – Scientific and Technical Comments Archived 2008-10-11 at the Wayback Machine

[SiteExeSum-3] RKM's – Rotating Piston Machines – Project Summary

[ICSAT2008-4] 1 2 Schapiro, B. and Terlitsky, L., "The RKM (RKM) Rotary Piston Machines with the Jumping Momentously Axis", Proceedings of the International Conference on Sustainable Automotive Technologies 2008 (ICSAT2008), 4th to 9th November 2008 in Melbourne, Australia

[5] Fu, K., Knobloch, A., Cooley, B., Walther, D., Fernandez-Pello, A. C., Liepmann, D., and Miyasaka, K., Microscale Combustion Research for Applications to MEMS Rotary IC Engine, Proc. 2001 National Heat Transfer Conference, Anaheim, CA, June 10–12, 2001.

[1]

[2]

[3]

[4]

[5]