RS800

Last updated
RS800
RS800dinghy.JPG
RS800s downwind at Lake Garda. +
Development
DesignerPhil Morrison
NameRS800
Crew2
Boat
Crew2
Hull
Type Monohull
ConstructionEpoxy & GRP Foam Sandwich
Hull weight136 lb (62 kg) (242 lb (110 kg) total sailing weight)
LOA 15 ft 9 in (4.80 m)
Beam 6 ft 2 in (1.88 m) (9 ft 6 in (2.90 m) maximum beam with racks extended)
Hull appendages
Keel/board typeDaggerboard
Rig
Rig typeCarbon composite mast and bowsprit & aluminium alloy boom
Sails
Spinnaker area225 sq ft (20.9 m2)
Upwind sail area172 sq ft (16.0 m2)
Racing
D-PN 77.0
RYA PN 799

The RS800 is a light-weight sailing dinghy designed by Phil Morrison and manufactured by RS Sailing. [1] The boat is sailed by two people both on trapeze and has a main, jib and spinnaker. [2] The RS800 has a Portsmouth Yardstick number of 799 [3] and a D-PN of 77.0. [4] There is a large racing circuit in the UK, and some European events each year. [5]

Contents

Performance and design

The RS800 has a weight equalisation system with extendable racks and lead weights, making the boat accommodating for both male and female sailors. [6] It is a twin trapeze boat and the jib is self-tacking and the spinnaker is designed with low loads on the sheets. [6] In 2007 a new deck layout was adopted, removing the stepped side in favour of more open design to encourage easier 'run - through'. In 2013 the class approved a new sail plan with the introduction of a square topped mainsail to modernise the boat. In 2017 the class changed their rules to allow crews to operate the mainsheet and for the sheet to be taken directly from the boom without a deck cleat. This change is optional but has been popular in uptake within the class.

Related Research Articles

<span class="mw-page-title-main">Tornado (sailboat)</span>

The Tornado is a double handed multihull class recognised as an International Class by the International Sailing Federation. It was used for the Catamaran discipline at the Olympic Games from 1976 to 2008.

<span class="mw-page-title-main">Albacore (dinghy)</span> Two-person dinghy for competitive racing

The Albacore is a 4.57 m (15 ft) two-person planing dinghy, for competitive racing and lake and near-inshore day sailing. Hulls are made of either wood or fiberglass. The basic shape was developed in 1954 from an Uffa Fox design, the Swordfish. Recent boats retain the same classic dimensions, and use modern materials and modern control systems.

<span class="mw-page-title-main">49er (dinghy)</span> Olympic sailing class

The 49er and 49er FX is a two-handed skiff-type high-performance sailing dinghy. The two crew work on different roles with the helm making many tactical decisions, as well as steering, and the crew doing most of the sail control. Both of the crew are equipped with their own trapeze and sailing is done while cantilevered over the water to the fullest extent to balance against the sails.

<span class="mw-page-title-main">Cadet (dinghy)</span>

The Cadet is a class of sailing dinghy designed to be sailed by two children up to the age of 17. It is a one-design class, originally designed by Jack Holt in 1947. Cadets are sailed worldwide in more than 40 countries.

<span class="mw-page-title-main">Hobie Cat</span> Small sailing catamaran

Hobie Cat is a company that manufactures sailing catamarans, surfboards, sailboats, kayaks, stand-up paddle boards, and pedalboards as the Hobie Cat Company. It was founded in 1961 by Hobart Alter, who originally manufactured surfboards. Its line of products has included more than twenty sailing craft, plus a variety of other watercraft.

<span class="mw-page-title-main">Fireball (dinghy)</span> Sailboat class

The Fireball is a British sailing dinghy that was designed by Peter Milne as a one-design racer and first built in 1962.

<span class="mw-page-title-main">Laser Stratos</span>

The Laser Stratos is an all-round cruising and racing boat designed by Phil Morrison and built by Laser Performance, the same company as the famous Laser Standard dinghy. It is built from fibre-glass and foam sandwich. The Laser Stratos comes in two forms, one with a keel and one with a centreboard. The centreboard version is red and the keel version is blue. The Stratos is quite spacious and most of the rigging is kept out of the way. The boat can optionally be fitted with trapeze lines and an engine bracket for carrying an outboard engine.

<span class="mw-page-title-main">Cherub (dinghy)</span>

The Cherub is a 12 feet long, high performance, two-person, planing dinghy first designed in 1951 in New Zealand by John Spencer. The class is a development class, allowing for significant variation in design between different boats within the rule framework. The minimum hull weight was originally 110 lbs.

The Pacer class of sailing dinghy, formerly known as the Puffin Pacer, was designed in the United Kingdom by Jack Holt. It was commissioned by Puffin Paints and Glues to be designed as sailing dinghy for use by families, so needing to be larger than their earlier Puffin dinghy. It has since become a popular learning and racing dinghy in Australia, Canada, the Netherlands, India and the UK. The name was changed in the UK early 1970s, although Australia continued to use the name until 1989, when they followed the UK in dropping the "puffin" and chose the wedge-tailed shearwater as the boat's symbol.

<span class="mw-page-title-main">Laser 3000</span>

The Laser 3000 is a racing sailing dinghy crewed by two persons with a trapeze for the crew. Launched in 1996, the 3000 was developed from the Laser 2, using the original Frank Bethwaite-designed planing hull combined with a brand new self-draining deck by Derek Clark. Clark also re-designed the rig, using spars and sails from premium proprietary sources and replacing the symmetric spinnaker of the Laser 2 by a larger asymmetrical spinnaker. The gennaker is chute-launched and retrieved using a single halyard line, and is set on a retractable bowsprit. Helm balance and handling were improved using a shorter-footed mainsail with two full-width battens giving a larger roach. A mast with conventional spreaders replaced the now-unusual diamond arrangement of the Laser 2.

<span class="mw-page-title-main">3000 (dinghy)</span> Racing sailing dinghy crewed by two persons with a trapeze for the crew

The 3000 is a racing sailing dinghy crewed by two persons with a trapeze for the crew. Launched in 1996 as the Laser 3000, the 3000 was developed from the Laser 2, using the original Frank Bethwaite-designed planing hull combined with a new designed self-draining deck by Derek Clark. Clark also re-designed the rig, using spars and sails from premium proprietary sources and replacing the symmetric spinnaker of the Laser 2 by a larger asymmetric spinnaker (gennaker). The gennaker is chute-launched and retrieved using a single halyard line, and is set on a retractable bowsprit. Helm balance and handling were improved using a shorter-footed mainsail with two full-width battens giving a larger roach. A mast with conventional spreaders replaced the now-unusual diamond arrangement of the Laser 2.

<span class="mw-page-title-main">Jacksnipe</span> Two-man racing dinghy

The Jacksnipe is a two-man racing sailing dinghy with a single trapeze for the crew and symmetrical spinnaker.

The 2000(formerly the Laser 2000) is a performance sailing dinghy designed by Phil Morrison and currently sold by RS Sailing. It combines a traditional GRP hull and foam sandwich deck moulding with a modern asymmetric rig including a furling jib, reefing mainsail and single line gennaker hoist system.

<span class="mw-page-title-main">Windmill (sailing dinghy)</span> Sailboat class

The Windmill is an American sailing dinghy that was designed by Clark Mills as a one-design racer and first built in 1953.

<span class="mw-page-title-main">RS400</span>

The RS400 is a light-weight sailing dinghy designed by Phil Morrison and manufactured by RS Sailing. The dinghy is sailed by two people and has a main, a jib and an asymmetric spinnaker. It has a PY of 948 and a D-PN of 82.3.

<span class="mw-page-title-main">RS600</span>

The RS600 is a sailing dinghy designed by Clive Everest and Nick Peters and supplied by RS Sailing. It is now built by the Boatyard at Beer. It is a single hander with trapeze and racks. It has a Portsmouth Yardstick of 916 and a D-PN of 76.2.

The Dart 18 is a one-design 18-foot (5.5 m) long glassfibre sailing catamaran. It is designed to be sailed by two people and can achieve speeds of up to 20 knots. This is reflected in its Portsmouth Yardstick of 805 and D-PN of 76.3

<span class="mw-page-title-main">125 (dinghy)</span>

The 125 is a 12 ft 6 in (3.81 m) two person intermediate sailing dinghy complete with main, jib, spinnaker and trapeze. The 125 class has a strong following within Australia with national titles being held every year around the country and local state associations. The class was originally designed as an intermediate class for developing skills with the jib, spinnaker and trapeze but has become popular from novice to experienced sailors.

The RS700 is a single-handed racing dinghy built by RS Sailing and designed in 2000 by Nick Peters and Alex Southon as part of the RS series and built in 2001. It is raced in many sailing clubs around Britain, with a PY number of 850 and a D-PN of 73.3.

ISO is an International Sailing Federation (ISAF) class of two-person sailing dinghy with a single trapeze and an asymmetric spinnaker. The ISO was designed in 1993 by Ian Howlett and John Caig and manufactured by Reg White Limited of Brightlingsea as part of the "White Formula" range of boats originally marketed by Topper International Ltd and since 2013 by Vantage Sailing Ltd. The boat has a fully battened mainsail, jib and an asymmetric spinnaker.

References

  1. RS Sailing
  2. RS Class Association
  3. "Portsmouth-yardstick".
  4. "Centerboard Classes". US Sailing. Archived from the original on 16 August 2012. Retrieved 31 July 2012.
  5. Yachts & Yachting Archived 2011-09-29 at the Wayback Machine
  6. 1 2 Boat Facts