Radiation law for human mobility

Last updated


The radiation law is way of modeling human mobility (geographic mobility, human migration) and it gives better empirical predictions than the gravity model of migration which is widely used in this subject. [1]

Contents

Intercity mobility

Waves of migration due to displacement by war, or exploitation in the hope of geographical discoveries could be observed in the past, however with new technological advancements in transportation keep making it easier and cheaper to get to one place from another. With intercontinental flights we even can travel to another continent, on a business trip for instance, and come back within a few hours. Not only time but road networks and flight networks are being used more and more intensively also, and there is an increasing need to describe the patterns of human peoples' mobility and their effect on network usage, whether the network is a transportation, communication or some other type of network.

The radiation model [1]

Radiation models appeared first in physics to study the process of energetic particles or waves travel through vacuum. The model in the social science describes the flows of people between different locations. Daily commuting is the major part of the flows, so modeling job seeking has to be an important part of the model and so it is in the radiation model. People look for jobs in every county starting with their own home county. The number of open jobs depends on the size of the resident population . The potential employment opportunity (e.g. conditions, income, working hour, etc.) is with the distribution of . Then, for each county job opportunities are assigned, which are random draws from the distribution. Individuals then chooses the job which is closest to their home county and provides the highest . Thus, they take into account the proximity to their home county and the benefits it can provide. This optimization gives the migration flows (called commuting fluxes) between counties across the country. This is analogous to the model in physics that describes the radiation and absorption process, that's why it's called the radiation model. An important feature of the model is that the average flux between two counties does not depend on the benefit distribution, the number of job opportunities and the total number of commuters. The fundamental equation of the radiation model gives the average flux between two counties,

where is the total number of commuters from county , and are the population in county and respectively, and is the total population in the circle centered at and touching excluding the source and the destination population. The model is not static as the Gravity model, and has clear implications which can be empirically verified.

Example

The population density around Utah is much lower than around Alabama and so are the job opportunities, given that the population of the two states is the same. Thus, the fundamental equation implies that people from Utah have to travel further to find suitable jobs on average than people from Alabama, and indeed, this is what the data shows. The Gravity model gives bad predictions both on short and long distance commuting, while the prediction of the Radiation model is close to the census data. Further empirical testing shows [2] that the Radiation model underestimates the flow in case of big cities, but generalizing the fundamental equation the model can give at least as good predictions as the Gravity model.

Other forms of the radiation model

In 1971 famed economist William Alonso produced a working paper that describes a mathematical model of human mobility. [3] In that manuscript Alonso remarks: "It is almost as if an urban area were a radioactive body, emitting particles at a steady rate[.]" In addition to many of the same mathematical terms used by Simini et al., Alonso's radiation model includes measures of climate (degree days) and wealth (per capita income) for both the emitting and receiving locales, but only includes the distance between these urban areas as opposed to a radial measure of intervening population density.

Other models of human mobility

The most influential model to describe trade patterns, and in a similar way, describe human mobility is the gravity model of trade. The model predicts, that the migration flow is proportional to the population of the cities/countries, and it is reciprocal in a quadratic order in the distance between them. Although, it is an intuitive description of the flows, and it is used to describe gravitational forces in physics, in terms of migration it does not perform well empirically. Moreover, the model just simply assumes the given functional form without any theoretical background.

Related Research Articles

<span class="mw-page-title-main">Fick's laws of diffusion</span> Mathematical descriptions of molecular diffusion

Fick's laws of diffusion describe diffusion and were first posited by Adolf Fick in 1855 on the basis of largely experimental results. They can be used to solve for the diffusion coefficient, D. Fick's first law can be used to derive his second law which in turn is identical to the diffusion equation.

<span class="mw-page-title-main">Inductance</span> Property of electrical conductors

Inductance is the tendency of an electrical conductor to oppose a change in the electric current flowing through it. The electric current produces a magnetic field around the conductor. The magnetic field strength depends on the magnitude of the electric current, and follows any changes in the magnitude of the current. From Faraday's law of induction, any change in magnetic field through a circuit induces an electromotive force (EMF) (voltage) in the conductors, a process known as electromagnetic induction. This induced voltage created by the changing current has the effect of opposing the change in current. This is stated by Lenz's law, and the voltage is called back EMF.

The primitive equations are a set of nonlinear partial differential equations that are used to approximate global atmospheric flow and are used in most atmospheric models. They consist of three main sets of balance equations:

  1. A continuity equation: Representing the conservation of mass.
  2. Conservation of momentum: Consisting of a form of the Navier–Stokes equations that describe hydrodynamical flow on the surface of a sphere under the assumption that vertical motion is much smaller than horizontal motion (hydrostasis) and that the fluid layer depth is small compared to the radius of the sphere
  3. A thermal energy equation: Relating the overall temperature of the system to heat sources and sinks

A continuity equation or transport equation is an equation that describes the transport of some quantity. It is particularly simple and powerful when applied to a conserved quantity, but it can be generalized to apply to any extensive quantity. Since mass, energy, momentum, electric charge and other natural quantities are conserved under their respective appropriate conditions, a variety of physical phenomena may be described using continuity equations.

<span class="mw-page-title-main">Boltzmann equation</span> Equation of statistical mechanics

The Boltzmann equation or Boltzmann transport equation (BTE) describes the statistical behaviour of a thermodynamic system not in a state of equilibrium; it was devised by Ludwig Boltzmann in 1872. The classic example of such a system is a fluid with temperature gradients in space causing heat to flow from hotter regions to colder ones, by the random but biased transport of the particles making up that fluid. In the modern literature the term Boltzmann equation is often used in a more general sense, referring to any kinetic equation that describes the change of a macroscopic quantity in a thermodynamic system, such as energy, charge or particle number.

<span class="mw-page-title-main">Trip distribution</span>

Trip distribution is the second component in the traditional four-step transportation forecasting model. This step matches tripmakers’ origins and destinations to develop a “trip table”, a matrix that displays the number of trips going from each origin to each destination. Historically, this component has been the least developed component of the transportation planning model.

<span class="mw-page-title-main">Hydraulic head</span> Specific measurement of liquid pressure above a vertical datum

Hydraulic head or piezometric head is a specific measurement of liquid pressure above a vertical datum.

Used in hydrogeology, the groundwater flow equation is the mathematical relationship which is used to describe the flow of groundwater through an aquifer. The transient flow of groundwater is described by a form of the diffusion equation, similar to that used in heat transfer to describe the flow of heat in a solid. The steady-state flow of groundwater is described by a form of the Laplace equation, which is a form of potential flow and has analogs in numerous fields.

<span class="mw-page-title-main">Gravity model of trade</span> Bilateral trade flow model

The gravity model of international trade in international economics is a model that, in its traditional form, predicts bilateral trade flows based on the economic sizes and distance between two units. Research shows that there is "overwhelming evidence that trade tends to fall with distance."

In radiometry, radiosity is the radiant flux leaving a surface per unit area, and spectral radiosity is the radiosity of a surface per unit frequency or wavelength, depending on whether the spectrum is taken as a function of frequency or of wavelength. The SI unit of radiosity is the watt per square metre, while that of spectral radiosity in frequency is the watt per square metre per hertz (W·m−2·Hz−1) and that of spectral radiosity in wavelength is the watt per square metre per metre (W·m−3)—commonly the watt per square metre per nanometre. The CGS unit erg per square centimeter per second is often used in astronomy. Radiosity is often called intensity in branches of physics other than radiometry, but in radiometry this usage leads to confusion with radiant intensity.

In fluid mechanics and mathematics, a capillary surface is a surface that represents the interface between two different fluids. As a consequence of being a surface, a capillary surface has no thickness in slight contrast with most real fluid interfaces.

The Herschel–Bulkley fluid is a generalized model of a non-Newtonian fluid, in which the strain experienced by the fluid is related to the stress in a complicated, non-linear way. Three parameters characterize this relationship: the consistency k, the flow index n, and the yield shear stress . The consistency is a simple constant of proportionality, while the flow index measures the degree to which the fluid is shear-thinning or shear-thickening. Ordinary paint is one example of a shear-thinning fluid, while oobleck provides one realization of a shear-thickening fluid. Finally, the yield stress quantifies the amount of stress that the fluid may experience before it yields and begins to flow.

<span class="mw-page-title-main">Diffusion</span> Transport of dissolved species from the highest to the lowest concentration region

Diffusion is the net movement of anything generally from a region of higher concentration to a region of lower concentration. Diffusion is driven by a gradient in Gibbs free energy or chemical potential. It is possible to diffuse "uphill" from a region of lower concentration to a region of higher concentration, as in spinodal decomposition. Diffusion is a stochastic process due to the inherent randomness of the diffusing entity and can be used to model many real-life stochastic scenarios. Therefore, diffusion and the corresponding mathematical models are used in several fields beyond physics, such as statistics, probability theory, information theory, neural networks, finance, and marketing.

In probability theory, a balance equation is an equation that describes the probability flux associated with a Markov chain in and out of states or set of states.

In engineering, physics, and chemistry, the study of transport phenomena concerns the exchange of mass, energy, charge, momentum and angular momentum between observed and studied systems. While it draws from fields as diverse as continuum mechanics and thermodynamics, it places a heavy emphasis on the commonalities between the topics covered. Mass, momentum, and heat transport all share a very similar mathematical framework, and the parallels between them are exploited in the study of transport phenomena to draw deep mathematical connections that often provide very useful tools in the analysis of one field that are directly derived from the others.

<span class="mw-page-title-main">Radiation stress</span> Term in physical oceanography

In fluid dynamics, the radiation stress is the depth-integrated – and thereafter phase-averaged – excess momentum flux caused by the presence of the surface gravity waves, which is exerted on the mean flow. The radiation stresses behave as a second-order tensor.

The algebraic stress model arises in computational fluid dynamics. Two main approaches can be undertaken. In the first, the transport of the turbulent stresses is assumed proportional to the turbulent kinetic energy; while in the second, convective and diffusive effects are assumed to be negligible. Algebraic stress models can only be used where convective and diffusive fluxes are negligible, i.e. source dominated flows. In order to simplify the existing EASM and to achieve an efficient numerical implementation the underlying tensor basis plays an important role. The five-term tensor basis that is introduced here tries to combine an optimum of accuracy of the complete basis with the advantages of a pure 2d concept. Therefore a suitable five-term basis is identified. Based on that the new model is designed and validated in combination with different eddy-viscosity type background models.

Bimetric gravity or bigravity refers to two different classes of theories. The first class of theories relies on modified mathematical theories of gravity in which two metric tensors are used instead of one. The second metric may be introduced at high energies, with the implication that the speed of light could be energy-dependent, enabling models with a variable speed of light.

<span class="mw-page-title-main">Individual mobility</span> How humans move within a network

Individual human mobility is the study that describes how individual humans move within a network or system. The concept has been studied in a number of fields originating in the study of demographics. Understanding human mobility has many applications in diverse areas, including spread of diseases, mobile viruses, city planning, traffic engineering, financial market forecasting, and nowcasting of economic well-being.

The soil moisture velocity equation describes the speed that water moves vertically through unsaturated soil under the combined actions of gravity and capillarity, a process known as infiltration. The equation is alternative form of the Richardson/Richards' equation. The key difference being that the dependent variable is the position of the wetting front , which is a function of time, the water content and media properties. The soil moisture velocity equation consists of two terms. The first "advection-like" term was developed to simulate surface infiltration and was extended to the water table, which was verified using data collected in a column experimental that was patterned after the famous experiment by Childs & Poulovassilis (1962) and against exact solutions.

References

  1. 1 2 Simini, Filippo; Marta C. Gonzales; Amos Maritan; Albert-László Barabási (2012). "A universal model for mobility and migration patterns". Nature. 7392. 484 (7392): 96–100. arXiv: 1111.0586 . Bibcode:2012Natur.484...96S. doi:10.1038/nature10856. PMID   22367540. S2CID   4431030.
  2. Masucci, A. Paolo (2013). "Gravity vs Radiation Models: On the Importance of Scale and Heterogeneity in Commuting Flows". Physical Review E. 88 (2): 022812. arXiv: 1206.5735 . Bibcode:2013PhRvE..88b2812M. doi:10.1103/PhysRevE.88.022812. PMID   24032888. S2CID   27776392.
  3. Alonso, William (1971). "The System of Intermetropolitan Population Flows" (PDF). Working Paper No. 155.