| Radley-England Waterplane | |
|---|---|
 | |
| Radley-England II | |
| Role | Racing aircraft |
| Designer | James Radley and Gordon England [1] |
| First flight | 1913 [1] |
| Number built | 1 [1] |
The Radley-England Waterplane was a British floatplane designed and built by James Radley and Gordon England to take place in the 1913 Circuit of Britain race. Damaged before the start of the race, it was unable to compete and was subsequently rebuilt as the Radley-England Waterplane 2 [1]
The Radley-England Waterplane was a twin-hulled flying boat with a parasol-mounted biplane wing. The wing was of four-bay biplane construction with ailerons fitted to the top wing only. A single horizontal stabiliser and elevator with twin balanced rudders mounted below it were carried on four wire-braced booms behind the wing. It was powered by three 50 hp (37 kW) Gnome Omega rotary engines arranged in line above the wing centre section, each connected by a roller chain to a long shaft at the rear of which was a four-bladed propeller 9 ft 10 in (3 m) diameter. To protect the occupants from the oil thrown out, the front engine was partially enclosed by an aluminium cowling. [1]
A number of successful flights were made at Huntingdon in April 1913 with Gordon England at the controls, [2] using a temporary wheeled undercarriage. It was then taken to Shoreham for further trials. During these England ran over a buoy when landing, tearing the bottom out of one of the hulls. [1]
The aircraft was subsequently rebuilt in a modified form. The flat bottomed hulls were replaced with a pair of clinker-built hulls made by the South Coast Yacht Agency of Shoreham, each with a pair of tandem cockpits; the Gnome engines were replaced by a single 150 hp (110 kW) Sunbeam 150hp water-cooled engine driving a slightly smaller propeller and wing area was increased by slightly increasing the span of the upper wing. [1]
Data from British Aircraft 1809-1914 [1]
General characteristics
Performance
The Sopwith Tabloid and Sopwith Schneider (floatplane) were British biplanes, originally designed as sports aircraft and later adapted for military use. They were among the first successful types to be built by the Sopwith Aviation Company. The "Tabloid", so named because of its small size, caused a sensation when it made its first public appearance.
The Avro Type E, Type 500, and Type 502 made up a family of early British military aircraft, regarded by Alliott Verdon Roe as his firm's first truly successful design. It was a forerunner of the Avro 504, one of the outstanding aircraft of the First World War.
The Short Admiralty Type 74 was a single-engined biplane tractor seaplane with non-folding wings, which saw service with the Royal Naval Air Service during the First World War.
The Bristol T.B.8, or Bristol-Coanda T.B.8 was an early British biplane built by the Bristol Aeroplane Company and designed by the Romanian Henri Coandă. Fifty four Bristol T.B.8s were built, being mainly used as a trainer. A small number of Bristol T.B.8s were briefly used as bombers at the start of the World War I by the Royal Naval Air Service.
The Bristol Gordon England biplanes were a series of early British military biplane aircraft designed by Eric Gordon England for the Bristol Aeroplane Company that first flew in 1912. Designed for easy ground transport, the aircraft could be quickly disassembled.
The Sopwith Three-seater was a British aircraft designed and built prior to the start of the First World War. One of the first aircraft built by the Sopwith Aviation Company, it was operated by both the Royal Naval Air Service (RNAS) and the Royal Flying Corps (RFC), being used briefly over Belgium by the RNAS following the start of the War.
The Sopwith Bat Boats were British flying boats designed and built from 1912 to 1914. A single-engined pusher biplane, the Bat Boat was the first successful flying boat and amphibious aircraft built in the United Kingdom, with examples used by the Royal Navy and by Greece and Germany.
The Dunne D.8 of 1912 was a tailless swept wing biplane, designed by J. W. Dunne to have inherent stability. One example was supplied to RAE Farnborough. License-built Burgess-Dunne models were used by the US Signal Corps and United States Navy and the short-lived Canadian Aviation Corps. It was the latter's first and only warplane.
The Dunne D.7 was one of J. W. Dunne's swept wing tailless aircraft designed to have automatic stability, first flying in 1911. It was a single seat, single engined pusher monoplane developed from the unsuccessful D.6.
The Royal Aircraft Factory C.E.1 was a prototype British flying boat of the First World War. It was a single-engined pusher configuration biplane intended to carry out coastal patrols to protect shipping against German U-boats, but only two were built, the only flying boats to be designed and built by the Royal Aircraft Factory.
The Cody Floatplane was designed and built by Samuel Franklin Cody as an entrant in the 1913 Daily Mail Circuit of Britain race, which offered a prize of £5,000. On 7 August 1913 the aircraft suffered a structural failure during flight trials and both Cody and his passenger were killed.
The ASL Viking was a single-engined two seater biplane aircraft designed and built by Horatio Barber's Aeronautical Syndicate Ltd. at Hendon. It was first flown in January 1912.
The COW Biplanes were a pair of similar British tractor biplanes built to compete in the 1912 British Military Aeroplane Competition. They were not successful.
The Graham-White Type VII "Popular" was an early British aircraft designed by J. D. North and built by the Grahame-White Aviation company, with the intention of producing a low-cost aircraft to popularize aviation. It was initially produced with a 35 hp Anzani 3-cylinder Y configuration engine and offered for sale at a price of less than £400. Despite its low price the aircraft included structural refinements such as hollow-section interplane struts. It was first flown in 1913.
The Short S.80 was an early British floatplane built by Short Brothers for Frank McClean to undertake an aerial expedition up the Nile to investigate the cataracts between Aswan and Khartoum. After a successful flight to Khartoum it was returned to England, where it was used for training by the RNAS. When built it was the largest successful aircraft that had been constructed in Britain. It was also known as the Short Nile Pusher Biplane Seaplane.
The Sopwith 1913 Circuit of Britain Biplane was a British floatplane built by Sopwith to take part in the 1913 Daily Mail Circuit of Britain Air race. The only entrant to start, it had to be withdrawn after a landing accident two-thirds of the way through the race.
The Bristol-Burney seaplanes were a pair of experimental seaplanes produced by a collaboration between Lt. Dennistoun Burney and the British and Colonial Aeroplane Company during 1912–14. The aircraft, neither of which was successfully flown, featured a novel hydroplane undercarriage. Although not a success, their development was the basis of Burney's later invention of the paravane.
The Bristol P.B.8, or Bristol-Coanda P.B.8', was an early British-built, Romanian-designed two-seat biplane trainer made by the Bristol Aeroplane Company in 1914. Only one was completed, which was never flown.
During the pioneer years before the First World War, Cedric Lee and G. Tilghman Richards in the UK built and flew a series of aircraft having a novel flat ring-shaped or annular wing. They built both biplane and monoplane types, and in 1913 their first monoplane proved to be an early example of a statically stable aircraft.
The Dunne-Huntington triplane, sometimes referred to as a biplane, was a pioneer aircraft designed by J. W. Dunne and built by A. K. Huntington. It was of unusual staggered triple-tandem configuration and an early example of an inherently stable aeroplane, flying regularly between 1910 and 1914.
