Last updated A pair of late-model Flexon Comp ski boots. The cable closures are designed to hold the flex plate (black and pink) firmly against the front of the boot. The plate can be changed to modify the forward flex.
The Flexon was a downhillski boot introduced by Raichle in the winter of 1980/81. Based on designs by Sven Coomer, Al Gross and Erik Giese, the Flexon used a unique system to control forward flex in a predictable way, as well as making the boot more comfortable and easier to put on and remove. The basic layout was, and is, generally referred to as a "three-piece" design -- three-piece boots preceding the Flexon included the Henke Strato, Nordica Comp 3 and a dozen other designs from Italian bootmakers.
The Flexon was a major success on the pro circuit in the 1980s and 90s, especially among freestyle and mogul skiers looking for better performance and less shin bruising. A series of business mis-steps led to Raichle's demise in 1999, and the Flexon along with it. It remained so popular that the Flexon lived on through a vibrant aftermarket network and online auctions, notably the large collection maintained by free skier Seth Morrison.
K2 Sports Purchase the original Flexon moulds, theae have since been released under the new Full Tilt brand. Roxa, the Italian boot maker who produces Flexon for K2, also sells the boot under their own name. Numerous companies are now producing three-piece designs.
History
Before Flexon
Traditional boots use a piece of leather (or two in this case) stitched to the sole.
Today's plastic ski boots evolved from leather designs that in turn evolved from conventional winter hiking boots. These all followed the same basic layout; the boot was built on top of a semi-stiff sole of leather or (for a stiffer boot) wood. The upper shell consisted of single layer or multiple layers of leather and stiffeners that were formed around a foot-like wooden block, the "last". Some models were designed with a single piece of leather wrapped over the toe area of the last, with the two sides of the leather meeting at the back of the heel, where they were stitched together. The designs normally left a slot-like opening and overlapping flaps running from the instep and up in front of the ankle. Laces threaded across the split section allow the boot to be tightened over the foot, and a tongue below the split sealed it to prevent water or snow entering.[1]
Following the commercial introduction of the Kandahar binding in 1933, cable binding alpine racers were able to fasten the heel of the boot solidly to the top of the ski. They asked for heavier, stiffer boots to improve edge control. By the 1950s, boots had grown stiff enough that lacing was an onerous chore. In 1955, the Swiss firm Henke introduced the Speedfit boot, closed with overcenter buckles invented by the pilot Hans Martin.[2] In 1971, Henke introduced several three-piece plastic designs which suffered structural failures due to the choice of an insufficiently strong plastic material.
The conventional "front-entry" plastic ski boot is so stiff that it needs to open along the entire front, not just the calf area. Metal buckles are needed to provide the leverage needed to close them.
When the first attempts were made to replace leather with modern materials it was found that early plastics simple had too little flex to allow the boot to be built in the same manner. Generally the shells would be so stiff that they could not be opened sideways along the tongue, making it very difficult to enter the boot. New plastics introduced in the 1960s offered the required amount of flexibility to get into them, but when buckled closed they offered almost no forward flex. This made walking very awkward, reduced the feel of the ski on the snow, and made the impacts between the boot and calf painful. Bob Lange solved this problem by splitting the boot into two parts, one over the foot with an overlap closure to seal out snow, and another for the lower leg. These were joined together with rivets at the ankles to allow the upper cuff to rotate forward.[3] At the same time, Henke's first plastic boots used a three-piece shell, with an open tub for the foot, a hinged cuff, and an external "shell-tongue" to close and seal the lower section.[4]
With the introduction, between 1969 and 1972, of the Nordica Astral and Grand Prix designs, these "front-entry" style boots achieved their modern form, with a removable innerboot that could be customized for precise and comfortable fit. Martin-style buckles provided the force necessary to close the stiff plastic shells. New buckle designs and other adjustments have been added, but today's overlap race boots look remarkably like the original Nordica Grand Prix.[5] In 1976 Nordica introduced its own series of three-piece designs.
Lange-bang
In the traditional front-entry boot design, forward flex is resisted by the friction of the lower section of the leg cuff moving over the vertically extended top of the foot section, which rises above the ankle. This sliding movement can occur until the upper cuff reaches the flat part of the foot area, where further flex requires the plastic to press down on the skier's foot. Shaping the two parts offers some control over the flex pattern.[6] Some designs have a lip moulded into the foot section that controls this stopping point.
Generally the resistance to forward motion is roughly linear until it suddenly stops, or the foot section deforms sideways. When travelling over small bumps, full force is immediately applied to the shin, at the point where the cuff meets the calf at the top of the boot.[6] This can lead to bruising known as "Lange-bang" or "boot bite".[7] When the force is released, friction tends to hold the boot in that position, requiring further force to return it to its neutral position.
Sven Coomer and Erik Giese
Sven Coomer is an Australian athlete and ski coach who came to the United States in the 1960s and began working for the American importer of Nordica boots. He was instrumental in developing Nordica's Astral, Grand Prix and Comp 3 designs.
After leaving Nordica, in the late '70s he modified a Nordica Meteor shell to use a springy nylon flex-controlling internal shell-tongue. He brought the design to Erik Giese in Aspen. Giese, an ex-ski racer and lawyer from Seattle, had founded a small research-and-design company in 1973, called Comfort Products. He employed two former NASA space-suit engineers: Al Gross, who was instrumental in developing the Flexon bellows tongue based on space suit components, and Dixie Rinehart, who designed articulated gloves later licensed to Swany.
Coomer arranged prototyping in Italy, and recommended the design to Raichle product manager Hanspeter Rohr, a former Swiss ski team member and former speed coach for the U.S. Ski Team. Meanwhile, Giese, Gross and Rinehart built a polished prototype with an external shell-tongue, and this became the Flexon.
The Flexon's spring tongue had two advantages; the application of force was progressive, and the boot returned to its neutral position when the force was released in a smoothly controlled or "dampened" manner (this characteristic would endear the boot to downhill racers, who didn't want to be surprised by a lively return when encountering bumps). The key was to ensure that the flexing force remained under control even with extreme bending. The result was a smooth flex that started off soft and progressively stiffened, which also eliminated Lange-bang.[8]
The flex tongue is placed on the outside of the boot in front of the leg and over the foot. This is in addition to the internal padded tongue. This meant that the split between the right and left halves of the boot did not require the overlapping flaps of the conventional design that keep out the snow; in the Flexon, the flex plate served this purpose. With the overlapping flaps removed, in theory the boot was easier to put on and take off, as the lower shell was open to the sky once the buckles were released and the flex plate folded forward. However, the edges of the lower shell's opening were sharp and skiers learned to live with shell bite on the instep, at least in the early years of the Flexon's evolution.
Another advantage of the design, largely a side-effect as opposed to design feature, is the location of the buckles. In a conventional front-entry design, there are two independent sections of the boot that need to be closed. Normally each section has two buckles, producing the classic four-buckle boot with two buckles over the foot and two on the leg cuff. The Flexon provides one buckle each on the foot and lower leg, and a third over the ankle. When tightened, this third buckle pulls the flex tongue and foot rearward, helping to stabilize the heel in the rear pocket of the boot.
Flexon
In 1978/79, Giese prepared a prototype of the design, and showed it to the US distributor of Raichle boots, headed by Heinz Herzog. Seeing the potential of the design, they sent him to Raichle's headquarters in Switzerland. Raichle already produced a series of ski boots that were copies of Nordica models, and during the early 1980s they were facing competition from an explosion of new styles like rear-entry. Raichle had nothing in development that could match their competitors.[8]
The company was initially skeptical, but when Giese demonstrated the distortion of a conventional boot when it flexed forward, they decided to start development of a full prototype, the Flexon Concept. The Concept was a success, and after being renamed the Flexon 5 it was released to the market for the winter of 1980/81. It was an early hit among freestyle skiers (then still known as "hot doggers") where the forgiving flex was a major advantage.[8][9]
When Bill Johnson won downhill gold at the 1984 Winter Olympics on the Flexon Comp, the boot became a major force in the high-end market. Other Flexon users of the era included Nelson Carmichael.[9] The boot consistently received excellent reviews, although complaints about the complex buckle system were nearly universal.[10]
Success and failure
Three generations of Flexon. In the center is the original design, on the right is an example from the Kneissl years, and on the left the re-released Full Tilt versions. All three of these have custom replacement liners.
In 1983, the company was sold to Peter Werhan, grandson of Konrad Adenauer, the chancellor of Germany. Werhan was an avid skier, and saw the purchase as an opportunity to mix work and play. During the 1980s, sales of the Flexon line grew dramatically. Even a newly-opened factory was hard pressed to keep up with demand, which reached 400,000 pairs a year.[8]
In the late 1980s, Werhan fell asleep while driving and was killed. Werhan's wife Beatris took over, but by 1996, the business was on the verge of bankruptcy. The company was then purchased by Kneissl & Friends and operated as before. However, in 1999, the owner of Kneissl & Friends undertook a re-branding exercise, creating Kneissl-Raichle. This change, combined with a move to produce the boot under license at Roces, failed, and sales slowed.[8]
Kneissl & Friends was sold to Roces in 2001, and boot production under the Raichle brand ended. Many freestyle and mogul skiers considered the Flexon essential. When Flexon sales ended, eBay became a major source for parts to keep Flexon boots working. Skiers like Seth Morrison built up large stocks of spare parts to keep their boots on the hill.[9]
After Flexon
In 2004, K2 Sports bought the original Flexon moulds, planning to enter the boot business.[N 1] However, they initially did nothing with the design. In 2006, K2 purchased Line Skis, and Line decided to immediately re-launch the Flexon under the new brand-name, Full Tilt. Immediate turned out to be a relative term, and the new boots did not reach the market until early 2006 in Japan, Canada at the end of that year, and a full launch in 2008 in the US. Their first products were simple re-creations of the original Flexons, but the lineup has since seen several changes.[9]
Around the same time, another famous free skier, Glen Plake, started working with Dalbello to create a Dalbello version of the Flexon three-piece concept.[11] The result was the "Cabrio" design, which combined the basic three-piece tongue with modern buckles and other improvements. Released as the Krypton lineup, the boots made Dalbello well known among expert skiers for the first time in years. Dalbello has since started applying the three-piece design concept to different markets, including the back-country touring and traditional downhill.[12]
Roxa, a sub-brand of Roces, continued selling a modified Flexon design in Europe. Nordica has also re-introduced a series of three-piece designs.[6] Several new entrants have also introduced three-piece designs, or announced plans to do so.
Related Research Articles
Snowboards are boards where the users places both feet usually secured, to the same board. The board itself is wider than most skis, with the ability to glide on snow. Snowboards widths are between 6 and 12 inches or 15 to 30 centimeters. Snowboards are differentiated from monoskis by the stance of the user. In monoskiing, the user stands with feet inline with direction of travel, whereas in snowboarding, users stand with feet transverse to the longitude of the board. Users of such equipment may be referred to as snowboarders. Commercial snowboards generally require extra equipment such as bindings and special boots which help secure both feet of a snowboarder, who generally ride in an upright position. These types of boards are commonly used by people at ski hills, mountains, backcountry, or resorts for leisure, entertainment, and competitive purposes in the activity called snowboarding.
A ski is a narrow strip of semi-rigid material worn underfoot to glide over snow. Substantially longer than wide and characteristically employed in pairs, skis are attached to ski boots with ski bindings, with either a free, lockable, or partially secured heel. For climbing slopes, ski skins can be attached at the base of the ski.
Alpine skiing, or downhill skiing, is the pastime of sliding down snow-covered slopes on skis with fixed-heel bindings, unlike other types of skiing, which use skis with free-heel bindings. Whether for recreation or for sport, it is typically practiced at ski resorts, which provide such services as ski lifts, artificial snow making, snow grooming, restaurants, and ski patrol.
Skiing, or traveling over snow on skis, has a history of at least eight millennia. The earliest archaeological examples of skis were found in Russia and date to 6000 BCE. Although modern skiing has evolved from beginnings in Scandinavia, 5000-year-old wall paintings suggest use of skis in the Xinjiang region of what is now China; however, this continues to be debated. Originally purely utilitarian, starting in the mid-1800s skiing became a popular recreational activity and sport, becoming practiced in snow-covered regions worldwide, and providing a market for the development of ski resorts and their related communities.
A ski binding is a device that connects a ski boot to the ski. Generally, it holds the boot firmly to allow the skier to maneuver the ski. However, if certain force limits are exceeded, it releases the boot to minimize skier injury, such as in the case of a fall or impact. There are different types of bindings for different types of skiing.
Ski boots are footwear used in skiing to provide a way to attach the skier to skis using ski bindings. The ski/boot/binding combination is used to effectively transmit control inputs from the skier's legs to the snow.
A riding boot is a boot made to be used for horse riding. The classic boot comes high enough up the leg to prevent the leathers of the saddle from pinching the leg of the rider, has a sturdy toe to protect the rider's foot when on the ground and has a distinct heel to prevent the foot from sliding through the stirrup. The sole is smooth or lightly textured to avoid being caught on the tread of the stirrup in the event of a fall.
Combat boots are military boots designed to be worn by soldiers during combat or combat training, as opposed to during parades and other ceremonial duties. Modern combat boots are designed to provide a combination of grip, ankle stability, and foot protection suitable for a rugged environment. They are traditionally made of hardened and sometimes waterproofed leather. Today, many combat boots incorporate technologies originating in civilian hiking boots, such as Gore-Tex nylon side panels, which improve ventilation and comfort. They are also often specialized for certain climates and conditions, such as jungle boots, desert boots, and cold weather boots as well as specific uses, such as tanker boots and jump boots.
Marker International is a German manufacturing company of equipment for winter sports established in 1952 and headquartered in Straubing, Lower Bavaria. Founded by Hannes Marker, the company is known for pioneering releasable binding technology. Marker's first model, the Duplex was followed in 1953 by the Simplex toe binding which was a huge success in the 1950s. New models introduced in the 1980s were major competitors on the alpine racing circuit.
Shin-bang is a general sense of discomfort/pain in the lower anterior portion of the tibia that contacts with the tongue of the ski boot, especially when pressed against the boot. Shin-bang is not to be confused with shin-bite, a condition where your shin is rubbed raw due to irritation inside of the ski boot.
Nordica is an Italian manufacturing company of winter sports products, focusing on skiing. Based in Giavera del Montello, Nordica is currently a division of Tecnica Group, after this corporation acquired it from Benetton in 2003.
Mountaineering boots are a type of footwear used in mountain climbing. They are designed specifically for moving over harsh terrain.
The Nava System was a ski binding and custom ski boot offered for sale in the 1980s. The system used a combination of flexible sole plate to keep the boot centered, and a spring-loaded plastic arm on the rear binding that was used to transmit sideways motions of the leg to the ski. This eliminated the need for a hard shell on the boot; the Nava boot was soft and resembled a knee-high winter boot. In spite of numerous endorsements by racing stars, the system never caught on and sales ended by the late 1980s.
The Head Standard was Howard Head's first successful ski design, and arguably the first modern downhill ski. The Standard used composite construction, with a plywood core sandwiched between aluminum outer skins, steel edges tapering into the core, and a hard plastic base, sidewalls and topsheet. The only major changes in ski materials since the Standard are the use of fibreglass structural layers in place of the aluminum layers, and substitution of expanded plastic foam for the wooden core.
Look's Nevada, released in 1950, was the first recognizably modern alpine ski binding. The Nevada was only the toe portion of the binding, and was used with a conventional cable binding for the heel. An updated version was introduced in 1962 with a new step-in heel binding, the Grand Prix. These basic mechanisms formed the basis for LOOK bindings for over 40 years, changing mainly in name and construction materials. The Nevada toe pattern is almost universal among bindings today.
Hanson Industries invented and popularized the rear-entry ski boot. Formed by brothers Chris and Denny Hanson in 1969, the company became a huge success in the late 1970s. A series of missteps in the early 1980s led to a rapid death spiral and the company went bankrupt in 1984. It was purchased by Daiwa, a Japanese fishing tackle company that handled Hanson's distribution in Japan. Daiwa ended sales in North America and Europe. European products, notably the famous Salomon SX series, used Hanson's exit as a springboard to market domination during the second half of the 1980s. Denny Hanson later introduced the "Apex" design, which combines features of alpine and snowboarding boots.
Rosemount Ski Boots introduced one of the earliest all-plastic ski boots for the downhill skiing market, competing with Bob Lange for the title of "first". Rosemount's design was easily distinguished by its use of the uncommon "side-entry" method for putting the boot on, which was rare at the time and is no longer used.
Lange is a major producer of ski boots used in alpine (downhill) skiing. They introduced the world's first plastic ski boots in 1962, and a greatly improved model aimed at the racing market in 1965. After several World Cup and Olympics wins in 1967 and 1968 made them a must-have on the circuit, Lange has remained a force in the racing market ever since. Their boots have equipped five times as many World Cup medal winners as any other brand into the 2000s. The front-entry design introduced by Lange is used by almost every modern ski boot to this day. Lange remains a major brand worldwide.
The SCX, for "SideCut eXtreme", was an alpine ski introduced by Elan in the winter of 1993/4. Skis before the SCX had almost always used a shape that was slightly curved inward on the sides, typically by 7 millimetres (0.28 in) compared to a straight line running from tip to tail. The SCX was designed with over 22 millimetres (0.87 in) "sidecut", producing a wasp-waisted ski unlike anything on the market.
Sven Coomer is an Australian modern pentathlete. He competed at the 1956 Summer Olympics.
References
Notes
↑ Another source says K2 purchased the moulds in 2005.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
