Rearwin Ken-Royce

Last updated
Rearwin Ken-Royce
Rearwin Ken-Royce Aero Digest April 1929.jpg
Rearwin Ken-Royce in Aero Digest April 1929
RoleGeneral aviation
National originUnited States
Manufacturer Rearwin Airplanes
Designer Fred Landgraf
First flightJanuary 1929
Produced1929-1937
Number built7

The Rearwin Ken-Royce was an American three-seat sport/touring biplane built by Rearwin Airplanes first in Salina, Kansas then Kansas City. It was the first airplane built by the company.

Contents

Design and Development

Rae Rearwin had toured Wichita aircraft manufacturers in the summer of 1927 and resolved to start an aircraft manufacturing business. After failing to hire Herb Rawdon away from Travel Air Corporation, he hired a young engineer Rawdon had suggested. Work on the company's first airplane began in an old garage in Salina, Kansas. The airplane, the Ken-Royce, was complete in January 1929. The name was both homage to Rae Rearwin's two sons, and a play on the name Rolls-Royce, implying a quality product. [1] [2]

The first aircraft was finished before a factory or financial backing had been set up. After both were found, further Ken-Royces were built in Kansas City. [2]

The Ken-Royce was a three-seat sport/touring biplane with pilot and passengers seated in tandem. Dual controls were optional, as was the choice of tail skid or tailwheel for the landing gear. Early Ken-Royce's were built with 180 hp (130 kW) Curtiss Challenger engines, while Continental Motors' first engine, the 170 hp (130 kW) A-70 was substituted after 1930. Production continued until 1937. [2]

Operational history

The prototype Ken-Royce participated in The All-Kansas Air Tour in 1929, an event with both scored events and timed races. The Tour Chairman characterized the Ken-Royce's performance as "unsurpassed." [2] :69 The plane was immediately entered in further races in Memphis and Tulsa.

Ruth Nichols then used the prototype in the Women's Air Derby in 1929. She was forced down outside Wichita because she was unfamiliar with the plane and had emptied the wing fuel tank: but did not realize there was a fuselage tank as well. She was again forced down west of Phoenix when the engine seized. She had to hike for several miles before eventually encountering a car which carried her to a railroad station. She rode to Los Angeles where she recruited a crew to fly another Curtiss Challenger engine out to the desert on a Ford Trimotor to replace the ruined engine. The repair was completed and Nichols flew the Ken-Royce to the starting line 30 minutes before the race started. Nichols and the Ken-Royce advanced to second-place by the time the race reached Columbus. However, on a test flight after adjusting the propeller pitch, the Ken-Royce crashed. It was shipped back to Rearwin by rail. [2] :74–80

Ken-Royces were entered in the National Air Races in 1929 and 1930, the Miami Air Races, the Detroit Air Show, and the Pikes Peak Air Meet. One Ken-Royce participated in the Ford National Reliability Air Tour, but took 11th in a field of 18. [2]

The third Ken-Royce biplane was sold to the Dallas School of Aviation, and was delivered by an aviatrix working for the American Eagle company named Jean LaRene. A flight instructor and rated transport pilot, she flew the Ken-Royce in the 1931 and 1932 Women's Air Derby. In 1940, she purchased the plane back from a private owner. Today it is the only Ken-Royce to survive. [2] :88–90 [3]

Variants

Data from RearwinAirplanes.com [1]

Rearwin 2000/Rearwin 2000-C
The initial version of the Ken-Royce, introduced in 1929. Used the 180 hp (130 kW) Curtiss Challenger engine. One prototype and three production built.
Rearwin 2000-CO
Version of the Ken-Royce using the 170 hp (130 kW) Continental A-70 engine. One prototype and two production aircraft built.

Operators

Honduran Air Force - Ordered one Ken-Royce in 1937. [2]

Surviving Aircraft

4/5th scale replica of the Ken-Royce (N400KR) Robinson Mere-Merit (N400KR).jpg
4/5th scale replica of the Ken-Royce (N400KR)

Specifications (Rearwin 2000-C)

Data from [1]

General characteristics

Performance

Related Research Articles

<span class="mw-page-title-main">Douglas Y1B-7</span> American bomber/observation aircraft

The Douglas Y1B-7 was a 1930s American bomber aircraft. It was the first US monoplane given the B- 'bomber' designation. The monoplane was more practical and less expensive than the biplane, and the United States Army Air Corps chose to experiment with monoplanes for this reason. At the time the XB-7 was ordered, it was being tested by Douglas Aircraft as an observational plane.

<span class="mw-page-title-main">Curtiss Robin</span> Type of aircraft

The Curtiss Robin, introduced in 1928, was a high-wing monoplane built by the Curtiss-Robertson Airplane Manufacturing Company. The J-1 version was flown by Wrongway Corrigan who crossed the Atlantic after being refused permission.

<span class="mw-page-title-main">Curtiss P-1 Hawk</span> 1923 fighter biplane family by Curtiss

The P-1 Hawk was a 1920s open-cockpit biplane fighter aircraft of the United States Army Air Corps. An earlier variant of the same aircraft had been designated PW-8 prior to 1925.

Rearwin Airplanes was a series of US airplane-manufacturing businesses founded by Andrew ("Rae") Rearwin in 1928. Rae Rearwin was an American businessman who had developed several successful business ventures in the Salina, Kansas area in the early 20th century. Although he had no experience with aircraft manufacturing, he felt that he could succeed with his solid business acumen. With his two sons, Ken and Royce, he hired some engineers and built the Ken-Royce in a garage in Salina. The business moved to the Fairfax Airport in Kansas City, Kansas, and went through several variations before it was sold to Commonwealth Aircraft in 1942, which went bankrupt in 1946.

<span class="mw-page-title-main">Thomas-Morse XP-13 Viper</span> Prototype biplane fighter

The XP-13 Viper was a prototype biplane fighter aircraft designed by the American company Thomas-Morse Aircraft Corporation. The airplane was delivered to the United States Army in 1929, but they did not adopt it.

<span class="mw-page-title-main">Aeronca L</span> Type of aircraft

The Aeronca L was a 1930s American cabin monoplane designed and built, in small numbers, by Aeronca Aircraft. It differed significantly from other Aeronca planes by the use of radial engines, streamlining, and a cantilever low wing.

<span class="mw-page-title-main">Vickers Type 143</span> Type of aircraft

The Vickers Type 143 or Bolivian Scout was a British single-seat fighter biplane designed and built by Vickers in 1929-1930. Six were built for Bolivia in 1930, which used the survivors in the Chaco War against Paraguay.

<span class="mw-page-title-main">Commonwealth Skyranger</span> Type of aircraft

The Commonwealth Skyranger, first produced as the Rearwin Skyranger, was the last design of Rearwin Aircraft before the company was purchased by a new owner and renamed Commonwealth Aircraft. It was a side-by-side, two-seat, high-wing taildragger.

<span class="mw-page-title-main">Travel Air 2000</span> American civilian biplane

The Travel Air 2000/3000/4000 (originally, the Model A, Model B and Model BH were open-cockpit biplane aircraft produced in the United States in the late 1920s by the Travel Air Manufacturing Company. During the period from 1924–1929, Travel Air produced more aircraft than any other American manufacturer, including over 1,000 biplanes. While an exact number is almost impossible to ascertain due to the number of conversions and rebuilds, some estimates for Travel Air as a whole range from 1,200 to nearly 2,000 aircraft.

<span class="mw-page-title-main">Rearwin Sportster</span> Type of aircraft

The Rearwin Sportster is a 1930s American two-seat, high-winged, cabin monoplane designed and built by Rearwin Aircraft & Engines for sport/touring use.

<span class="mw-page-title-main">Rearwin Cloudster</span> Type of aircraft

The Rearwin Cloudster was a two or three-seat civil utility aircraft produced by the Rearwin Aircraft & Engines Company of Kansas City, Missouri beginning in 1939. It was a strut-braced, high-wing monoplane of conventional design with an enclosed cabin and fixed, taildragger undercarriage. One specialized version was produced as a trainer for Pan American Airways.

<span class="mw-page-title-main">Rearwin Junior</span> Type of aircraft

The Rearwin Junior was a 1930s two-seat high-winged ultra-light monoplane sport aircraft produced in the United States by Rearwin Airplanes Inc. It was part of a trend of extremely low-cost aircraft as manufacturers attempted to survive the Great Depression.

<span class="mw-page-title-main">Rearwin Speedster</span> Type of aircraft

The Rearwin Speedster was a two-seat, high-wing, sport aircraft produced by Rearwin Airplanes Inc. in the United States in the 1930s.

<span class="mw-page-title-main">Waco 9</span> American biplane of 1925

The Waco 9 is an American-built three-seat biplane design that first flew in 1925.

Herbert Rawdon was an American aviation pioneer.

<span class="mw-page-title-main">Curtiss Carrier Pigeon</span> Type of aircraft

The Curtiss Carrier Pigeon was an American mail plane of the 1920s. A single-engined biplane designed and built to replace World War I surplus aircraft such as the DH-4, the Carrier Pigeon was one of the first aircraft designed specifically for U.S. Airmail service.

<span class="mw-page-title-main">Parks P-1</span> Type of aircraft

The Parks P-1 was an American three-seat sport biplane that was built in the late 1920s.

<span class="mw-page-title-main">G Elias & Brother</span> American Aircraft Manufacturer

G Elias & Brother was and American manufacturer of cabinets and aircraft based in Buffalo, New York in the 1920s. A.G. Elias sat on the Manufacturers Aircraft Association's board of directors along with President Frank H. Russell, VP Glenn L. Martin, Charles L. Laurence, Chance M. Vought, S.S. Bradley, George P. Tidmarsh, and Donald Douglas. E.J Elias promoted the construction of a Buffalo municipal airport to aid the local fledgling airplane industry of five aviation companies constructing airplanes and airplane parts. From 1920 to 1925, Elias company's chief engineer, David Earle Dunlap (1896-1957), designed the Elias EM-2 Expeditionary planes. He designed the NBS-3 bomber fuselage and the Elias M-1 Mail plane. Dunlap's Elias TA-1 design was the first United States Army Air Corps Trainer to have a radial engine. After tests a McCook Field, the Army Air Corps selected other manufacturers over the Elias bomber and trainer. The company designed the Elias EM-1 to meet requirements for a multirole amphibian marine expeditionary aircraft. Elias delivered six production Elias EM-2 aircraft with Liberty engines to the United States Navy in 1922.

<span class="mw-page-title-main">Command-Aire 3C3</span> American 1928 three-seat utility biplane

The Command-Aire 3C3 and similar 4C3 and 5C3 are American three-seat open cockpit utility, training and touring biplanes developed by Command-Aire in the late 1920s and early 1930s.

The Travel Air Model 10 was a 4-seat single-engined light aircraft of the late 1920s. Twelve aircraft were built before production ended.

References

  1. 1 2 3 Rearwin, Eric. "Rearwin Ken-Royce". Rearwin Airplanes. Archived from the original on 20 November 2008. Retrieved 24 December 2018.
  2. 1 2 3 4 5 6 7 8 9 Wright, Bill (1997). Rearwin: A Story of Men, Planes, and Aircraft Manufacturing During the Great Depression . Manhattan, Kansas: Sunflower University Press. ISBN   0-89745-207-0.
  3. 1 2 "Rearwin 2000C Ken-Royce Biplane". Pioneer Flight Museum. Retrieved 24 December 2018.