Recumbent Figure 1938

Last updated

Recumbent Figure 1938
Henry moore, figura recumbente, 1938.jpg
Sculpture in Tate Britain
Artist Henry Moore
Year1938
CatalogueLH 191
MediumGreen Hornton stone
Dimensions139 cm(55 in)
Location Tate, London

Recumbent Figure 1938 (LH191) [1] is an early sculpture by Henry Moore. It was commissioned by the architect Serge Chermayeff for his modernist villa at Bentley Wood, near Halland, Sussex. At the time it was made, it was Moore's largest stone sculpture. It was donated to the Tate Gallery in 1939, making it the first example of Moore's work in a public collection.

Contents

Description

Moore's large stone sculpture depicts a reclining female figure, which resembles the undulating landscape of the South Downs nearby. Chermayeff's commission was the first free-standing sculpture that Moore made to complement a specific building, a requirement that became a key feature of his later work. Moore considered the work to be site specific.

It was made from three blocks of Green Hornton, a Jurassic limestone from a quarry near Banbury in Oxfordshire. It was carved by hand, over a period of about 5 weeks, with Moore working outdoors at his cottage, Burcroft, in Kingston, Kent, assisted by Bernard Meadows. One block forms the head, which is abstracted to a bud, with shallow depressions for eyes and slight ridges for a nose and brows. The two other blocks were used for the body and legs. The figure has noticeable shoulders and arms, with pendant breasts hanging over a space where the torso should be, linked to an abdomen and legs. It measures 88.9 by 132.7 by 73.7 centimetres (35.0 in × 52.2 in × 29.0 in) and weighs 520 kilograms (1,150 lb).

Recumbent Figure was based on a smaller sculpture, perhaps the first time Moore create a maquette first rather that moving directly to the final sculpture. [2] The maquette is 13 cm long, and was originally cast in lead in an edition of three; later, two bronze editions of ten and eleven respectively were produced. [3] One of the bronze casts is now owned by the Henry Moore Foundation. [4] Three drawings by Moore are also related to the Recumbent Figure: Reclining Figures (HMF 1184), Drawing for Sculpture: Reclining Figures (HMF 1394), and Ideas for Sculpture: Reclining Figures (HMF 1396). [5]

The work is a development of Moore's earlier stone sculptures Reclining Figure 1929 (LH 59), which was made in Brown Hornton limestone, and his Reclining Woman (Mountains) 1930 (LH 84); and his elmwood sculpture Reclining Figure 1935–6 . It is less blocky and more rounded than the earlier works, and pierced with holes through.

Reception

The completed sculpture was delivered in 1938, but Chermayeff had paid only the £50 deposit of the £300 price before he became bankrupt in 1939. Chermayeff suggested to Moore that he could take the sculpture back and resell it. Moore returned the deposit and the sculpture was returned to him. At the suggestion of Kenneth Clark, it was offered to the Museum of Modern Art (MOMA) in New York, but the gallery declined. Clark then arranged for the Contemporary Art Society to buy it for £300, and the society presented it to the Tate Gallery in 1939. The Tate's previous director JB Manson had said Moore would appear in the gallery over his dead body; Manson retired in 1938, and his successor John Rothenstein was much more welcoming.

The sculpture went on loan for display at the British Pavilion at the 1939 New York World's Fair, and was still in the US when the Second World War broke out. Along with several other works by British sculptors, it was kept in MOMA's sculpture garden in New York during the war, where it suffered damage from the cold winter weather. It was vandalised by a group of US Marines one night in 1944, pushed off its plinth and the head broken off. After being repaired, and the end of the war, it returned to the Tate in 1946. It was displayed at the first London County Council open-air sculpture exhibition at Battersea Park from May 1948, alongside other works by Moore including his Three Standing Figures 1947 .

The sculpture became a popular feature at the Tate Gallery in London. It was selected as the example of Moore's work to be depicted on a tile mural at Pimlico Underground station, near the gallery, in 1972. It was also one of twelve Moore sculptures included in the "Sculpture for the Blind" exhibition at the Tate in 1972, when blind and partially sighted visitors were encouraged to touch the artworks.

See also

Notes

  1. "Recumbent Figure". henry-moore.org. Archived from the original on 15 December 2022.
  2. Tate. "Henry Moore: Sculptural Process and Public Identity"
  3. Henry Moore Foundation catalogue entry for LH 184
  4. HMF catalogue entry for LH 184 cast 7
  5. HMF catalogue: works related to Recumbent Figure

Related Research Articles

<span class="mw-page-title-main">Henry Moore</span> English artist known for sculpture (1898–1986)

Henry Spencer Moore was an English artist. He is best known for his semi-abstract monumental bronze sculptures which are located around the world as public works of art. As well as sculpture, Moore produced many drawings, including a series depicting Londoners sheltering from the Blitz during the Second World War, along with other graphic works on paper.

<i>Three-Piece Reclining Figure No. 2: Bridge Prop</i> Sculpture series by Henry Moore

Three-Piece Reclining Figure No. 2: Bridge Prop is a sculpture by Henry Moore, created in 1963, and produced in an edition of six copies.

<i>Two-Piece Reclining Figure: Points</i> Sculpture series by Henry Moore

Two-Piece Reclining Figure: Points is a sculpture by Henry Moore, catalogued as LH 606, and created in 1969–70.

<i>Draped Reclining Figure, 1952–53</i> Sculpture series by Henry Moore

Draped Reclining Figure, 1952–53 is a bronze sculpture by Henry Moore, catalogued as "LH 336".

<i>Reclining Figure 1969–70</i>

Reclining Figure 1969–70 is a bronze sculpture by English artist Henry Moore.

<i>Draped Seated Woman 1957–58</i>

Draped Seated Woman 1957–58 is a bronze sculpture by the British artist Henry Moore, cast in an edition of seven in the 1950s. The sculpture depicts a female figure resting in a seated position, with her legs folded back to her right, her left hand supporting her weight, and her right hand on her right leg. The drapery emphasises the female figure, but the facial features are abstracted and barely picked out.

<i>Draped Reclining Woman 1957–58</i>

Draped Reclining Woman 1957–58 is a bronze sculpture by British artist Henry Moore, with a series of six castings made by Hermann Noack in Berlin.

<i>King and Queen</i> (sculpture) Sculpture series by Henry Moore

King and Queen is a bronze sculpture by Henry Moore, designed in 1952. It depicts two figures, one male and one female, seated beside each other on a bench, both facing slightly to the left. It is Moore's only sculpture depicting a single pair of adult figures. Moore's records suggest it was originally known as Two Seated Figures.

<i>Spindle Piece</i>

Spindle Piece is a bronze sculpture by Henry Moore. Unusually, the sculpture was made in four sizes: a plaster maquette cast in bronze as Maquette for Spindle Piece in 1968, a larger plaster working model which was also cast in bronze as Spindle Piece in 1968, a larger series of bronze sculptures Large Spindle Piece cast in 1974, and the largest model, known as The Spindle, carved in travertine in 1981.

<i>Reclining Figure: Festival</i> Sculpture series by Henry Moore

Reclining Figure: Festival is a bronze sculpture by English artist Henry Moore, commissioned by the Arts Council in 1949 for the Festival of Britain in 1951. The sculpture can be viewed as an abstraction of a reclining female human figure, resting on two arms, with a small head.

<i>Three Standing Figures 1947</i> Sculpture by Henry Moore (LH 268, Battersea Park, London)

Three Standing Figures 1947 is a large stone sculpture by Henry Moore. It was made in 1947–48, and exhibited at London County Council's first Open-Air Sculpture Exhibition at Battersea Park in 1948. Donated to the council, it has been exhibited at the park since 1950. It became a Grade II listed building in 1988.

<i>Three Piece Sculpture: Vertebrae</i> Sculpture by Henry Moore

Three Piece Sculpture: Vertebrae is an abstract bronze sculpture by Henry Moore.

<i>Three Way Piece No.1: Points</i> Sculpture series by Henry Moore

Three-Way Piece No.1: Points is a bronze abstract sculpture by Henry Moore. Three full-size sculptures were cast in 1967, one installed on the Columbia University campus in Upper Manhattan, New York City, and the others at Des Moines Art Center, and Fairmount Park in Philadelphia.

<i>Reclining Figure 1938</i>

Reclining Figure 1938 is a small sculpture by Henry Moore of an sinuous abstracted human figure. An enlarged version was made in 1984 for the Oversea-Chinese Banking Corporation, Singapore. The resulting Large Reclining Figure is some 9 metres (30 ft) long, making it the largest sculpture made by Moore.

<i>Oval with Points</i> Sculpture series by Henry Moore

Oval with Points is a series of enigmatic abstract sculptures by British sculptor Henry Moore, made in plaster and bronze from 1968 to 1970, from a 14-centimetre (5.5 in) maquette in 1968 made in plaster and then cast in bronze, through a 110-centimetre (43 in) working model in 1968–1969 also made plaster and then cast in bronze, to a full-size 332-centimetre (131 in) bronze version cast in 1969.

Four-Piece Composition: Reclining Figure (LH154) is an important early stone sculpture by the English sculptor Henry Moore. He had been working on depictions of the reclining human figure since at least 1924, but this small piece, made in the latter half of 1934, is the first work in which Moore breaks a human figure down in to several separate pieces. It was acquired by the Tate Gallery in 1976.

<i>Family Group</i> (Moore) Sculpture series by Henry Moore

Family Group is a sculpture by Henry Moore. It was his first large-scale bronze sculpture, and his first large bronze with multiple castings. Made for Barclay School in Stevenage, it evolved from drawings in the 1930s, through a series of models to bronze castings in 1950–51. It also one of the last important sculptures that Moore developed from preliminary drawings: in future, he worked mainly from found objects, maquettes and models.

<i>UNESCO Reclining Figure 1957–58</i> Sculpture by Henry Moore (LH 416, UNESCO, Paris)


UNESCO Reclining Figure 1957–58 is a sculpture by Henry Moore. It was made in a series of scales, from a small plaster maquette, through a half-size working model made in plaster and cast in bronze, to a full-size version carved in Roman travertine marble in 1957–1958. The final work was installed in 1958 at the World Heritage Centre, the headquarters of UNESCO at the Place de Fontenoy in Paris. This was Moore's last major public commission in which he created a new work for a specific site; he afterwards generally worked from an existing sketch or model.

<i>Reclining Figure (Lincoln Center)</i> Sculpture by Henry Moore (LH 519, Lincoln Center for the Performing Arts, New York City)

Reclining Figure 1963–5 is a statue by Henry Moore. The original two-part bronze statue of a human figure was commissioned for the Lincoln Center for the Performing Arts in New York City, where it has been displayed outdoors since 1965 in a pool of water to the north of the new Metropolitan Opera House. Other copies in plaster or bronze exist, and are displayed in other cities.

<i>Reclining Figure 1939</i> Sculpture by Henry Moore

Reclining Figure 1939 is an elmwood sculpture by Henry Moore. It is an abstracted reclining human figure, with looped head, shoulders, and sinuous body and limbs.

References