| Rohrbach Ro II | |
|---|---|
 | |
| The Rohrbach Ro II demonstrating its emergency sailing rig | |
| Role | Flying Boat |
| National origin | Germany |
| Manufacturer | Rohrbach-Metall-Aeroplan Co. A/S, Copenhagen [1] |
| Designer | Adolf Rohrbach [1] |
| First flight | 11 November 1923 [2] |
| Number built | 1 [1] |
The Rohrbach Ro II was an all-metal, 4-seat reconnaissance and bomber flying boat, designed and produced in Germany in 1923. [1]
Founded in 1923 by Dr.-Ing. Adolf Rohrbach, the Rohrbach Metall-Flugzeugbau GmbH designed and built many aircraft using light-alloy stressed skin construction methods that were at the cutting edge of aircraft design in the 1920s. His previous experience with light-alloys at the Zeppelin-Staaken factory served Rohrbach well when designing the Rohrbach stressed-skin aircraft. [2]
After designing the un-built Ro I twin-engined flying boat, [2] Rohrbach developed the Rohrbach Ro II flying boat as an all-metal shoulder winged monoplane flying boat with two tractor engines mounted in nacelles, above the wings, on struts. Planforms and profiles were kept as simple as possible with rectangular section fuselage frames (with vee planing bottoms), constant chord wings, tailplane and fin with square cut tips and distinctive protruding servo/trim/balance tabs at wing and fin tips. The two-seat open cockpit sat between the engines at the wing leading edge, with an open gunner/bosun's position at the extreme nose. [1] A very unusual feature of several of Rohrbach's flying-boats was the provision of a pair of masts and sails to be rigged in the event of engine failure, allowing the aircraft to be sailed back to a safe harbour. [2]
At the time of the Ro II's production the Versailles Treaty forbade the construction of large aircraft in Germany so Rohrbach set up a Danish company, the 'Rohrbach-Metall-Aeroplan Co. A/S', to build the early Rohrbach aircraft. The strict regulation of the aircraft industry was relaxed in 1926,[ citation needed ] allowing the Rohrbach series to be built at the Rohrbach Metall-Flugzeugbau GmbH factory in Berlin. [2]
The first flight of the Ro II took place on 11 November 1923, pilotted by Werner Landmann and the aircraft was used in FAI record attempts for speed/load on 24 October 1924. After trials and record attempts were completed the aircraft was sold to Mitsubishi Shoji Kaisha Ltd., re-designated Yokosho Experimental Type R 1 and used for trials by the Imperial Japanese Navy. [1]
Data from [3]
General characteristics
Performance
Armament
The Blohm & Voss BV 138Seedrache was a trimotor flying boat designed and built by the German aircraft manufacturer Blohm & Voss. It served as the Luftwaffe's primary seaborne long-range maritime patrol and naval reconnaissance aircraft operated by the Luftwaffe during the Second World War.
The Beardmore Inflexible, also known as the Rohrbach Ro VI, was a three-engined all-metal prototype transport aircraft built by William Beardmore and Company at Dalmuir, Scotland.
Friedrichshafen FF.49 was a German, two-seat, single-engine float-plane designed by Flugzeugbau Friedrichshafen in 1917.
The Friedrichshafen FF.40 was a German three-seat floatplane of the 1910s produced by Flugzeugbau Friedrichshafen.
The Friedrichshafen FF.48 was a German two-seat floatplane fighter of the 1910s produced by Flugzeugbau Friedrichshafen.
The Friedrichshafen FF.60 was a German experimental floatplane produced by Flugzeugbau Friedrichshafen.
The Dornier Libelle, also designated Do A, was a German open-cockpit, all-metal, parasol wing, monoplane flying boat aircraft, with partly fabric-covered wings. There was three versions of the seaplane version; the prototype, first version, and improved version. A landplane version, built without sponsons and fitted with a fixed tailwheel undercarriage was produced as the Dornier Spatz.
The Rohrbach Ro X Romar was a German long-range commercial flying-boat and the last aircraft designed and built by Rohrbach Metall Flugzeugbau GmbH.
The Rohrbach Ro V Rocco was a twin-engined seaplane that was designed and manufactured by the German aircraft manufacturer Rohrbach Metall-Flugzeugbau.
Rohrbach Metall-Flugzeugbau was an airplane factory located in Berlin, Germany and founded in 1922 by Dr.-Ing Adolf Rohrbach. Rohrbach was a pioneer in building airplanes based on the metal stressed skin principle.
The Rohrbach Ro XI Rostra was a flying boat built in Germany in 1928 for use as a transatlantic mail plane.
The Rohrbach Ro VIII Roland was an semi-cantilever monoplane trimotor airliner designed and produced by the German aircraft manufacturer Rohrbach. It was capable of unrivalled performance in some categories; during its early years, the type held no less than 22 world records.
The Friedrichshafen FF.71 was a German biplane floatplane produced by Flugzeugbau Friedrichshafen.
The Zeppelin-Staaken E-4/20 was a revolutionary four-engine all-metal passenger monoplane designed in 1917 by Adolf Rohrbach and completed in 1919 at the Zeppelin-Staaken works outside Berlin, Germany. The E-4/20 was the first four-engine, all-metal stressed skin heavier-than-air airliner built.
The Rohrbach Ro IV, also known as the Beardmore BeRo.2 Inverness was an all-metal monoplane flying boat of the 1920s. Designed by the German company Rohrbach for the British Royal Air Force, two were ordered, one completed by Rohrbach's Danish subsidiary and the second by the British licensees, William Beardmore and Company, but the type performed poorly during testing and was abandoned.
The Rohrbach Ro IX "Rofix" was a German all-metal, parasol-wing fighter designed to meet the requirements for a new fighter competition conducted by the Turkish Air Force during the mid-1920s. A pair of prototypes were ordered, but both crashed during flight testing, killing one pilot, and further development was cancelled.
The Rohrbach Ro VII Robbe was an all-metal, twin engine flying boat built in Germany in the 1920s. It could be adapted to commercial or military rôles.
The Rohrbach Ro III was a twin-engined, all-metal flying boat built in Germany in the mid-1920s. A development of the Ro II, it could be configured either as an airliner or a reconnaissance aircraft. It was developed into the similar but more powerful Ro IIIa Rodra, intended only as a military reconnaissance/bomber. Four Ro IIIs were bought by Japan and two Rodras by Turkey.
The Friedrichshafen FF.11 was a flying boat built in Germany in the early 1910s.
The Friedrichshafen FF.63 was a German experimental floatplane produced by Flugzeugbau Friedrichshafen.
