Rohrbach Ro IX Rofix

Last updated

Rohrbach Ro IX
Ro IX 44218272.jpg
Side view of the first prototype, November 1926
Role Fighter aircraft
National origin Germany
Manufacturer Rohrbach Metall-Flugzeugbau
First flightAbout September 1926
Number built2 prototypes

The Rohrbach Ro IX "Rofix" was a German all-metal, parasol-wing fighter designed to meet the requirements for a new fighter competition conducted by the Turkish Air Force during the mid-1920s. A pair of prototypes were ordered, but both crashed during flight testing, killing one pilot, and further development was cancelled.

Contents

Background and description

In 1925 the Turkish Air Force decided to replace its obsolete SPAD S.XIII biplane fighters and announced a competition for modern aircraft. It received eight submissions from French and German companies and decided to order two prototypes each of the Dewoitine D.21, Nieuport-Delage NiD 42, Blériot-SPAD S.51, and the Rohrbach Ro IX Rofix for evaluation. Rohrbach Metall-Flugzeugbau received its contract in March 1926 that included an option for 28 additional aircraft and detail design work began at its Berlin factory under the supervision of Kurt Tank, designer of the Second World War-era Focke-Wulf Fw 190 fighter. [1] [2]

The Rofix had an oval-profile monocoque fuselage with the single-seat cockpit positioned unusually far aft behind the trailing edge of the wing which had a cutout to improve the pilot's visibility. The parasol wing was built around a single box girder spar and was connected to the fuselage with cabane struts. A single bracing wire extended from the wing to the bottom of the fuselage on each side. The aircraft was powered by a single closely-cowled, liquid-cooled 600-horsepower (450 kW) BMW VI V-12 engine. Its radiator protruded from the bottom of the fuselage between the struts for the conventional landing gear in line with the wing's leading edge. The Rofix was armed with a pair of 8-millimetre (0.315 in) machine guns that could be mounted in either the wings or in the upper forward fuselage. Each gun was provided with 250 rounds of ammunition. [3] [2]

Construction and flight testing

Due to the restrictions of the Versailles Treaty that forbade the building of military aircraft in Germany, Rohrbach was forced to build the Rofix at its Danish factory in Copenhagen. [2] Construction proceeded quickly and the company applied for a test-flight permit on 11 August 1926. Rohrbach reported that the first prototype was ready on 31 August and that the second one was almost complete, which probably meant that the Rofix made its first flight in early September. Test pilots reported that "handling was excellent and landing characteristics were good. The aircraft was well suited for aerobatics". [4] Despite these positive reports flight testing revealed problems with the aircraft's spinning characteristics and the wing's dihedral had to be altered several times to correct the issues. [4]

Despite these changes, the company's chief pilot, Werner Landmann, crashed the first prototype on 27 January 1927 while conducting spinning tests. The prominent First World War fighter ace Ernst Udet also flew the aircraft, probably after Landmann's crash, and commented that the pilot had a good view in all directions, even better than in the Fokker D.VII, the action of the elevators was good, but the ailerons were only partially effective, and the rudder was too small in a report that he submitted on 1 July. Another notable fighter ace, Paul Bäumer, was hired by Rohrbach to demonstrate the Rofix in Turkey and began to familiarise himself with the aircraft on 13 July in preparation for the acceptance trials. Two days later he began a spin at high altitude and could not recover from the spin, crashing with fatal results. The loss of the second prototype ended any possibility of further development and the option was cancelled, with an order for 10 D.21s ultimately being placed. [5]

Specifications

Rohrbach Rofix 3-view drawing from L'Aeronautique February,1927 Rohrbach Rofix 3-view L'Aeronautique February,1927.png
Rohrbach Rofix 3-view drawing from L'Aéronautique February,1927

Data fromThe Complete Book of Fighters: An Illustrated Encyclopedia of Every Fighter Built and Flown; [2] Turkish Dismay: The Ill-Starred Rohrbach Ro IX Rofix Fighter [3]

General characteristics

Performance

Armament

Related Research Articles

<span class="mw-page-title-main">Thomas-Morse MB-3</span> Type of aircraft

The Thomas-Morse MB-3 was an open-cockpit biplane fighter primarily manufactured by the Boeing Company for the U.S. Army Air Service in 1922. The MB-3A was the mainstay fighter for the Air Service between 1922 and 1925.

<span class="mw-page-title-main">Gloster F.5/34</span> Type of aircraft

The Gloster F.5/34 was a British fighter of the 1930s. It was a single-seat, single-engine monoplane of all-metal cantilever construction; the undercarriage was of the tailwheel type with retractable main wheels.

The Morane-Saulnier AF, also known as the Morane-Saulnier Type AF and the MoS 28 was a French First World War single-seat biplane fighter prototype from 1917.

<span class="mw-page-title-main">Rohrbach Ro II</span> Type of aircraft

The Rohrbach Ro II was an all-metal, 4-seat reconnaissance and bomber flying boat, designed and produced in Germany in 1923.

<span class="mw-page-title-main">ANF Les Mureaux 170</span> 1932 fighter aircraft by ANF Les Mureaux

The ANF Les Mureaux 170 was a prototype French fighter aircraft of the 1930s. It was a single-engined, single-seat parasol monoplane, but only two were built, the type being rejected for service by the French Air Force.

The Kondor E 3, sometimes erroneously known as E.III, was a German single seat, monoplane fighter aircraft designed and built close to the end of World War I. Though successful in the third D-type fighter competition at Aldershof in September 1918, only a few were produced, given the Idflieg designation of Kondor D.I.

<span class="mw-page-title-main">Nieuport-Delage NiD 48</span> French fighter aircraft

The Nieuport-Delage NiD 48 was a French single-engine parasol wing light fighter aircraft, designed and built in the 1920s. Its performance was not markedly better than that of the much heavier Nieuport-Delage NiD 62 then going into production, so only two were flown.

<span class="mw-page-title-main">Mitsubishi 1MF10</span> Japanese carrier-based fighter prototype

The Mitsubishi 1MF10 or Mitsubishi Experimental 7-Shi Carrier Fighter (七試艦上戦闘機) was a prototype Japanese monoplane single-seat carrier-based fighter aircraft of the 1930s. Two were built for the Imperial Japanese Navy, but both were lost in crashes, with no production following.

<span class="mw-page-title-main">Wibault 3</span> Type of aircraft

The Wibault 3 or Wibault Wib 3 C.1 was a French parasol wing prototype fighter aircraft from the 1920s, designed for high altitude operations. Its development was abandoned after repeated materials failure in its supercharger.

<span class="mw-page-title-main">Wibault 8 Simoun</span> Type of aircraft

The Wibault 8 or Wib 8 Simoun (Simoon) was a tandem seat, parasol wing fighter aircraft designed and built in France to a 1925 specification which was later withdrawn; only one Wib 8 was completed.

The Wibault 9 or Wib 9 was a single seat, parasol wing fighter aircraft designed and built in France in the 1920s. It was a re-engined version of the relatively successful Wib 7, but failed to reach production.

<span class="mw-page-title-main">Wibault 12 Sirocco</span> Type of aircraft

The Wibault 12 Sirocco or Wib 12 Sirocco was a two-seat, parasol wing fighter aircraft designed and built in France in the 1920s. Three fighter prototypes were completed, one for the RAF and two Army co-operation variants. There was no series production.

<span class="mw-page-title-main">Wibault 170 Tornade</span> Type of aircraft

The Wibault 13C.1 Trombe (Whirlwind), later known as the Wib 130C.1 Trombe was a single seat, parasol wing lightweight fighter aircraft designed and built in France in the 1920s. It was developed into the more powerful Wib 170C.1 Tornade (Tornado) but government interest in lightweight fighters soon waned.

<span class="mw-page-title-main">Wibault 210</span> Type of aircraft

The Wibault Wib 210 C.1 was a single engine, single seat low wing monoplane fighter aircraft, designed and built in France in the late 1920s. Flight tests revealed vibration problems and development was quickly abandoned.

<span class="mw-page-title-main">Letov Š-3</span> Type of aircraft

The Letov Š-3 was a single-seat, single-engine parasol wing fighter aircraft designed and built in Czechoslovakia in the early 1920s. Only one was completed and flown, its makers preferring to develop a biplane fighter.

The Caudron 02 was a French high altitude single seat fighter that was flown in November 1917.

<span class="mw-page-title-main">Lohner Type AA</span> Type of aircraft

The Lohner Type AA were a series of prototype fighters built during World War I. The program would eventually be cancelled due to inherent instability concerns of the design.

The Villiers VIII or 8amC1 was a French shipboard fighter capable of alighting on water. After competitive tests, it did not receive a production order.

<span class="mw-page-title-main">Salmson-Béchereau SB-5</span> Type of aircraft

The Salmson-Béchereau SB-5 was a two-seat fighter aircraft built for a French government programme in 1925. Despite a powerful engine it did not perform well and only one was built.

<span class="mw-page-title-main">Rohrbach Ro III</span> Type of aircraft

The Rohrbach Ro III was a twin-engined, all-metal flying boat built in Germany in the mid-1920s. A development of the Ro II, it could be configured either as an airliner or a reconnaissance aircraft. It was developed into the similar but more powerful Ro IIIa Rodra, intended only as a military reconnaissance/bomber. Four Ro IIIs were bought by Japan and two Rodras by Turkey.

References

  1. Andersson, pp. 58–59
  2. 1 2 3 4 Green & Swanborough, p. 502
  3. 1 2 Andersson, p. 59
  4. 1 2 Andersson, p. 61
  5. Andersson, pp. 61–63

Bibliography