Roseville train collision

Last updated

The Roseville train collision on 29 July 1950 was a railway collision near Roseville, New South Wales in Australia of the "signal at danger tripped past in accordance to the rules" type.

Contents

Accident

On the morning of 29 July 1950, trains were "running late and out of timetable order." The train driven by Driver Barrett found the departure signal at Roseville railway station at stop (red), and in accordance with the rules "tripped" past the train stop. However he went too fast, and the train ran into the rear of a stationary train ahead. Shortly after this a third train, approaching round a curve from the opposite direction, collided with the wreckage.

Guard Cross was in a guard's only compartment in the second-last car of his eight-car train. This car was a trailer, which had no speedometer. [1]

The train is said to have reached a speed of 40 miles per hour after tripping past. [2] This is too fast. The normal speed on the line was 50 miles per hour.

In one report Driver Barrett said that he was doing 15 miles per hour after tripping past. [3]

Carriages fitted with continuous air (or vacuum) brakes usually have a valve in each car whereby the brakes may be applied in an emergency. One such occasion was also at Roseville on 1908 when the guard fell off the train and a passenger applied the brakes. Penalty notices warn against improper usage. [4]

Driver Barrett reported that he had a coughing fit after tripping past the red signal, and that he had thus been distracted.

One report outlined this problem in more detail. The driver had been on sick leave, and this was his first day back on duty. He said he had been coughing all the way from Wynyard, eight stations away. [3] He blamed the coughing for the accident.

Injuries

All three trains were lightly loaded, so that only 12 passengers were injured. The two down trains were in the counter-peak direction, while the up train in the peak direction had just left at Lindfield on platform 2, the terminating platform, with most up passengers waiting on platform 1. [5]

Other reports say that 11 people were injured. [3] [2]

Carriages

In the 1950s, single deck trains, consisting of two sets of four cars (totalling 8 cars in all), often had 1 wooden car per 4 car set. The rest of the set were steel cars, which tend to be stronger than wooden cars in a collision.

In the 1950s, the guard's position in the train varied. It could be in a trailer car as car 6 or 7 (a steel car with no speedometer on view), or in car 4 or 5 (a steel or wooden car, which may or may not have a speedometer on view). The guard would have always have access to the air brakes which could stop the train.

Aftermath

The Board of Inquiry consisted of 3 men: [6]

Driver Barrett accepted full responsibility for the accident. [7]

Of the six train crew involved, the Board of Inquiry absolves five, including Guard Cross, and except for Driver Barrett. [6]

No departmental inquiry was held as "the cause of the accident was already known." One newspaper at least asks what steps will be taken to prevent similar accidents. [8]

See also

Related Research Articles

<span class="mw-page-title-main">Waterfall rail accident</span> 2003 train crash in New South Wales, Australia

The Waterfall rail accident was a train accident that occurred on 31 January 2003 near Waterfall, New South Wales, Australia. The train derailed, killing seven people aboard, including the train driver. The accident is famously remembered by systems engineers due to the poorly designed safety systems.

<span class="mw-page-title-main">Signal passed at danger</span> Train passing stop signal without authority

A signal passed at danger (SPAD), known in the United States as a stop signal overrun (SSO) and in Canada as passing a stop signal, is an event on a railway where a train passes a stop signal without authority. This is also known as running a red.

<span class="mw-page-title-main">Train stop</span> Railway safety device

Part of a railway signalling system, a train stop, trip stop or tripcock is a train protection device that automatically stops a train if it attempts to pass a signal when the signal aspect and operating rules prohibit such movement, or if it attempts to pass at an excessive speed.

<span class="mw-page-title-main">Glenbrook rail accident</span> Australian railway collision

The Glenbrook rail accident occurred on 2 December 1999 at 8:22 am on a curve east of Glenbrook railway station on the CityRail network between Glenbrook and Lapstone, in the Blue Mountains of New South Wales, Australia. Seven passengers were killed and 51 passengers were taken to hospital with injuries when a CityRail electric interurban train collided with the rear wagon of the long-haul Perth-to-Sydney Indian Pacific.

<span class="mw-page-title-main">Sunshine rail disaster</span> Severe Australian train accident in April 1908

The Sunshine rail disaster occurred on 20 April 1908 at the junction at Sunshine railway station when a Melbourne-bound train from Bendigo collided with the rear of a train from Ballarat. 44 people were killed and over 400 injured, almost all of them from the Ballarat train, as the Bendigo train was cushioned by its two locomotives.

The Norton Fitzwarren rail crash occurred on 4 November 1940 between Taunton and Norton Fitzwarren in the English county of Somerset, when the driver of a train misunderstood the signalling and track layout, causing him to drive the train through a set of points and off the rails at approximately 40 miles per hour (64 km/h). 27 people were killed. The locomotive involved was GWR King Class GWR 6028 King Class King George VI which was subsequently repaired and returned to service. A previous significant accident occurred here on 10 November 1890 and the Taunton train fire of 1978 was also within 2 metres.

The Darlington rail accident occurred on the evening of 27 June 1928 when a parcels train and an excursion train collided head on at Darlington Bank Top railway station in County Durham, England. The accident was caused by the parcels train driver passing a signal at danger, due to misunderstanding the signalling layout in an unfamiliar part of the station. This accident resulted in the deaths of 25 people and the serious injury of 45 people.

The 1995 Ais Gill rail accident occurred near Aisgill, Cumbria, UK, at about 18:55 hrs on 31 January 1995 when a class 156 Super-Sprinter was derailed by a landslide on the Settle-Carlisle Railway line and was subsequently run into by a similar train travelling in the opposite direction. The Guard of the first train was fatally injured in the collision.

The railways of New South Wales, Australia have had many incidents and accidents since their formation in 1831. There are close to 1000 names associated with rail-related deaths in NSW on the walls of the Australian Railway Monument in Werris Creek. Those killed were all employees of various NSW railways. The details below include deaths of employees and the general public.

The Hjuksebø train disaster occurred on the Sørlandet Line between Hjuksebø and Holtsås, Telemark, Norway on 15 November 1950. The Kristiansand-to-Oslo express had been due to pass through Hjuksebø, but was delayed, and the shunter believed he had time to turn a waiting freight-train around before it arrived, by shunting a number of freight cars out of the way. As he had failed to attach them to the engine, however, the cars ran downhill towards Holtsås station, straight into the express, killing fourteen. At the time, it was Norway's worst peacetime railway accident.

Pulled tail is the colloquialism referring to the act of a guard or conductor of a railway to apply the emergency brakes when something unexpected has been noticed. This could be an excess of speed in a section of line known to have a lower speed, or strange noises and shaking that might indicate that the train has derailed or something has broken.


The Sainthia train collision occurred on 19 July 2010, at the Sainthia Junction railway station in Sainthia, India, when the Uttar Banga Express collided with the Vananchal Express as it was leaving the platform. 66 people died as a result of the accident, and 165 people were reported injured.

The Slough rail accident happened on 16 June 1900 at Slough railway station on the Great Western Main Line when an express train from London Paddington to Falmouth Docks ran through two sets of signals at danger, and collided with a local train heading for Windsor & Eton Central. Five passengers were killed; 35 were seriously injured, and 90 complained of shock or minor injuries

This article lists significant fatal, injury-only, and other accidents involving railway rolling stock, including crashes, fires and other incidents in the Australian state of South Australia. The first known incident in this list occurred in 1873 in Smithfield, South Australia.

The rail transport in the island state of Tasmania, Australia has had many train accidents since its historic opening in 1871. The following is a list of train related accidents that have occurred on Tasmania's rail network.

This is a list of significant railway accidents in Queensland, Australia.

<span class="mw-page-title-main">Coppenhall Junction railway accident</span> 1962 disaster in the United Kingdom

On the evening of 26 December 1962, cold weather and snow in and around Crewe had caused points to become frozen and trains were being detained at signals. About midway between Winsford and Crewe, the 13:30 Glasgow Central to London Euston Mid-Day Scot, hauled by an English Electric type 4 diesel, D215, with 13 coaches and 500 passengers, was stopped at a signal but the driver found the telephone to Coppenhall Junction, the next signal box ahead, out of order. Seeing the next signal ahead he decided to proceed down towards it and use the telephone there, but too fast. In the darkness he failed to notice the 16:45 express from Liverpool Lime Street to Birmingham New Street, hauled by an electric locomotive with eight coaches with 300 passengers, standing on the line ahead and collided with it at about 20 mph (32 km/h).

References

  1. ↑ "Rail chief tells of official report on triple train smash". The Sun . No. 12658. New South Wales, Australia. 23 August 1950. p. 2 (LATE FINAL EXTRA). Retrieved 17 July 2017– via National Library of Australia.
  2. 1 2 "Train smash at 40 mph-- says rail officer". The Sun . No. 12659. New South Wales, Australia. 24 August 1950. p. 2 (LATE FINAL EXTRA). Retrieved 17 July 2017– via National Library of Australia.
  3. 1 2 3 "Driver's cough smash "cause"". The Sun . No. 12660. New South Wales, Australia. 25 August 1950. p. 9 (LATE FINAL EXTRA). Retrieved 18 July 2017– via National Library of Australia.
  4. ↑ "RAILWAY ACCIDENT AT ARTARMON". Evening News . No. 12, 834. New South Wales, Australia. 28 July 1908. p. 2. Retrieved 20 July 2017– via National Library of Australia.
  5. ↑ "12 HURT; 3 TRAINS IN CITY SMASH". Daily Advertiser . New South Wales, Australia. 29 July 1950. p. 1. Retrieved 16 July 2017– via National Library of Australia.
  6. 1 2 "LOOK-OUT "NOT KEPT"". The Sydney Morning Herald . No. 35, 181. New South Wales, Australia. 22 September 1950. p. 4. Retrieved 19 July 2017– via National Library of Australia.
  7. ↑ "Says Train Driver Took Smash Blame". Brisbane Telegraph . Queensland, Australia. 23 August 1950. p. 13 (LAST RACE). Retrieved 17 July 2017– via National Library of Australia.
  8. ↑ "Editorial". The Sun . No. 12641. New South Wales, Australia. 3 August 1950. p. 3 (LATE FINAL EXTRA). Retrieved 17 July 2017– via National Library of Australia.

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.