| SPCA 10 | |
|---|---|
 | |
| SPCA Paulhan-Pillard | |
| Role | Reconnaissance and bomber flying boat |
| National origin | France |
| Manufacturer | Société Provençale de Constructions Aéronautiques (SPCA) |
| Designer | Louis Paulhan and Pillard |
| First flight | 4 April 1928 |
| Number built | 1 |
The SPCA 10 or SPCA Paulhan-Pillard E.5 was a large, all-metal, French reconnaissance and bomber flying boat flown in 1928. Only one was built, and it was lost in a fatal crash during development.
The SPCA 10 was a parasol wing three-engined flying boat of all-metal construction. Its one-piece wing had a rectangular central region and trapezoidal outer areas, the latter carrying narrow ailerons over the whole of their trailing edges. The primary wing structure had a pair of steel spars and duralumin ribs. Unlike the rest of the aircraft, the wing was fabric covered. It was braced to the upper hull by a pair of parallel, vertical struts to each spar but stabilized with N-struts out to the floats, which were themselves braced to the outer wing spars with pairs of outward-leaning struts as well as by horizontal struts to the mid-hull. All these struts were steel tubes enclosed in streamlined casings. [1]
The flying boat was powered by three 310 kW (420 hp) Gnome-Rhône 9Ac Jupiter nine-cylinder radials mounted, uncowled, on the wing leading edge as closely as the propeller discs allowed. Their fuel and oil tanks were in the wing, away from the engines to reduce fire risks. [1] [2] The wing was thick enough to allow the engineer in-flight access to most of the engine accessories. [1]
The SPCA 10's hull was flat-sided and slender. Its single step planing bottom had a cross-section which altered from V in the nose to rounded at mid-hull. There was an open, circular position for a gunner or navigational observer in the extreme nose, with an enclosed navigator's cabin immediately aft. The pilots sat side by side in an open cockpit, equipped with dual control, midway between the nose and the leading edge. The central hull had internal compartments for the radio operator and the photographer and for rest. There were two, left-right staggered, open gunner's positions halfway between the trailing edge and the tail, which had openings in their floors above the waterline to allow downward fire or observation. [1]
The SPCA 10 had a steel-framed, fabric covered fin with a swept leading edge and flat top. Its servo-balanced rudder was almost rectangular apart from a rounded heel at the base of the fuselage. The tailplane was mounted on the fin at about one third height and supported on each side by a splayed pair of struts from the hull. Both it and the elevators were rectangular in plan, apart from a cut-out between the latter in which the rudder worked. [1]
The SCPA 10 first flew on 4 April 1928 at La Ciotat, piloted by Burri. After display at the July 1928 Paris Salon it went to Saint-Raphaël, Var, for official tests. These revealed a serious handling problem. When the engines speeds were reduced, the CAMS entered a dive, behaviour ascribed to the closeness of the propellers to the wing leading edge. As a result, alightings had to be made, counter-intuitively, under full power. The tests continued, though on 18 December 1928 an order was issued to stop them and modify the engine installation. Regrettably, this order was slow to reach Saint-Raphaël and on 8 January the pilot of the CAMS 10 reduced power on approach. The aircraft dived into the sea, killing all aboard. No more were built. [2]
Data from Les Ailes, June 1928, [1] Aviafrance, [3] Aeronautique Navale de chez nous, [2] Jane's all the World's Aircraft 1928 [4]
General characteristics
Performance
Armament
The Blériot 127 was a monoplane bomber aircraft developed and produced by the French aircraft manufacturer Blériot.
The Lioré et Olivier H-190 was a biplane flying boat aircraft designed and produced by the French aircraft manufacturer Lioré et Olivier.
The Dyle et Bacalan DB-10 was a heavy night bomber, designed in France and flown in 1926. It was a twin engine, high wing, metal frame monoplane, distinguished by a very thick centre section wing which formed the forward fuselage and housed the engines.
The SPCA 40T, also designated the SPCA VII, was a mailplane designed and produced by the French aircraft manfacturer Société Provençale de Constructions Aéronautiques (SPCA).
The SPCA Météore 63 was a biplane flying boat airliner designed and built by the French aircraft manufacturer Société Provençale de Constructions Aéronautiques (SPCA). It was the company's first aircraft, as well as the first seaplane to fulfil the strenuous conditions to secure a seaworthiness certificate of the first class and the first long distance seaplane to be procured by the French government.
The Levy Biche LB.2 was a single seat French sesquiplane fighter aircraft designed to be used from aircraft carriers. With a watertight fuselage, jettisonable wheeled undercarriage and small under-wing floats, it could survive emergency sea touchdowns; it could also be fitted with seaplane type floats.
The Lioré et Olivier LeO 8, Lioré et Olivier LeO 8-Cau 2 or Lioré et Olivier LeO 8 CAN 2 was a French two seat, parasol wing monoplane night fighter and reconnaissance aircraft, built in 1923.
The Caudron C.140 was a French tandem cockpit sesquiplane designed in 1928 as a combination of liaison aircraft and observer and gunnery trainer.
The Caudron C.27 was a French biplane, a two-seat basic trainer which also competed successfully in the 1920s.
The Caudron C.43 was the first French five-engined aircraft, a biplane intended for passenger transport or military use and multi-engined for safety. A development of the three-engined Caudron C.39, it had one tractor configuration engine in the nose and two push-pull pairs between the wings. It was capable of carrying eight passengers but was not developed.
The Descamps 17 A.2 was a two-seat reconnaissance fighter built under a French government programme of 1923. Two versions, with different engines, were tested and six examples were built under licence by Caudron as the Caudron C.17 A.2.
The Lioré et Olivier H-23-2 was an amphibious maritime reconnaissance flying boat, built in France in 1932. Three were produced for the Venezuelan Army Air Service.
The Wibault 220 or Wibault R.N.3 220 was a twin-engined French night reconnaissance aircraft. Two were built in 1930 to a government contract.
The CAMS 80 was an amphibious reconnaissance flying boat flown in the early 1930s. Two were built with different engines and were used by the Aéronavale for VIP transport and equipment development until 1938.
The Lioré et Olivier LeO H-23 was a French military flying boat, primarily intended for coastal reconnaissance, though able to carry a small bomb load. Only one was built.
The Hanriot H.34 was a basic trainer designed in France in 1924 which did not reach production. It was a parasol wing aircraft, seating two in tandem.
The Lioré et Olivier Leo H-15 was a French twelve-seat civil flying boat, flown in a national contest in 1926. It did not win but set two load carrying records, one a world record.
The Aviaméta 92 was a French, all-metal, five seat monoplane built in the late 1920s. Three different engines were fitted, and one example flew the first non-stop Paris-Algiers flight in preparation for an abandoned trans-Atlantic attempt.
The CAMS 54 was a strengthened and more powerful version of the French CAMS 51 civil transport and naval reconnaissance flying boat, developed for transatlantic flights. It is sometimes referred to as the 54 GR.
The Hanriot H.46 Styx was a French, single-engined, parasol wing aircraft which could equally be configured for training, liaison or ambulance roles; in the latter form it was able to accept a patient on a stretcher. Several different engines were fitted and flown but the type did not reach production.
