This article needs additional citations for verification .(May 2020) |
Also known as | VIM-1 |
---|---|
Developer | Ray Holt |
Manufacturer | Synertek Systems [1] |
Type | single board "trainer" computer |
Release date | circa 1976 |
Introductory price | US$238(equivalent to $1,290 in 2022) |
Units sold | 50,000[ citation needed ] |
Operating system | Supermon monitor |
CPU | Synertek 6502 @ 1 MHz |
Memory | 1 KB RAM (expandable to 4 KB on board), 4 KB ROM |
Storage | Tape recorder |
Display | 6 digit LED display |
Sound | Built-in loudspeaker |
Input | 29 'sensitive' keys, Serial RS-232, 51 I/O lines connector |
Power | External 5V - 1.5A power supply unit |
Dimensions | 10.75 inch x 8.25 inch x 0.5 inch |
The SYM-1 is a single board "trainer" computer produced by Synertek Systems in 1975. It was designed by Ray Holt.[ citation needed ] Originally called the VIM-1 (Versatile Input Monitor), that name was later changed to SYM-1.
The SYM-1 is a close copy [2] of the popular MOS Technology KIM-1 system, with which it is compatible to a large extent. Compared to the KIM-1, enhancements include the ability to run on a single +5 volt power supply, an enhanced monitor ROM, three configurable ROM/EPROM sockets, RAM expandable on board to 4 KB , an RS-232 serial port, and a "high speed" (185 bytes/second, the KIM-1 supports about 8 bytes/second) audio cassette storage interface. It also features on-board buffer circuits to ease interfacing to "high voltage or high current" devices.
One capability of the SYM-1 is its ability to allow an oscilloscope to be added to provide a 32 character display under software control. As explained in Chapter 7 of the "SYM Reference Manual", the vertical input, ground and trigger input of the oscilloscope are to be connected to the "Scope Out" connector AA on the SYM-1 board. The "Oscilloscope Output Driver Software" code provided in this chapter of the manual is to be entered into the SYM-1's memory and executed to enable the oscilloscope display. This code provides control of the oscilloscope display, as well as a rudimentary character set. Resistors R42 and R45 are to be adjusted to refine the displayed image.
Synertek sold ROMs which could be installed to add the BASIC programming language or a Resident Assembler/Editor (RAE). Synertek contracted with a company called Eastern House Software to port their Macro Assembler/Editor (MAE) into an 8 KB ROM. The author of MAE, RAE, and another version sold by Skyles Electric Works was Carl Moser. MAE was sold in various forms not only for the SYM-1 but also for other 6502-based computers including Commodore, Atari, KIM, and Apple. Other forms of MAE included a cross assembler for 6800 and 8085—and an offering of these cross assemblers was planned for RAE.
One of the more subtle features of the SYM-1 is the use of a look up table in the low memory of the 6502. This provides a vectoring function in its operating system to redirect subroutine calls to various input and output drivers, including interrupt servicing. Users are able to develop their own interface routines, and substitute new vectors for the original vectors in the startup UV-EPROM. This seamlessly maintains the normal operation of the board's monitor and languages such as Synertek Systems BASIC. One of the later home/education computers that uses this concept extensively is the BBC Micro produced by Acorn Computers in the UK. Some of the other computer designers of this era failed to grasp the significance of this elegant use of vectors to the software mapping of new developments in hardware.
The Acorn Electron was a lower-cost alternative to the BBC Micro educational/home computer, also developed by Acorn Computers Ltd, to provide many of the features of that more expensive machine at a price more competitive with that of the ZX Spectrum. It had 32 kilobytes of RAM, and its ROM included BBC BASIC II together with the operating system. Announced in 1982 for a possible release the same year, it was eventually introduced on 25 August 1983 priced at £199.
The Commodore PET is a line of personal computers produced starting in 1977 by Commodore International. A single all-in-one case combines a MOS Technology 6502 microprocessor, Commodore BASIC in read-only memory, keyboard, monochrome monitor, and, in early models, a cassette deck.
The KIM-1, short for Keyboard Input Monitor, is a small 6502-based single-board computer developed and produced by MOS Technology, Inc. and launched in 1976. It was very successful in that period, due to its low price and easy-access expandability.
The Acorn Atom is a home computer made by Acorn Computers Ltd from 1979 to 1982, when it was replaced by the BBC Micro. The BBC Micro began life as an upgrade to the Atom, originally known as the Proton.
The Big Board (1980) and Big Board II (1982) were Z80 based single-board computers designed by Jim Ferguson. They provided a complete CP/M compatible computer system on a single printed circuit board, including CPU, memory, disk drive interface, keyboard and video monitor interface. The printed circuit board was sized to match the Shugart 801 or 851 floppy drive. This allowed attachment to up to two 8 inch or 5 1/4 inch floppy disk drives. The Big Board II added a SASI interface for hard disk drives, enhancements to system speed and enhancements to the terminal interface.
KERNAL is Commodore's name for the ROM-resident operating system core in its 8-bit home computers; from the original PET of 1977, followed by the extended but related versions used in its successors: the VIC-20, Commodore 64, Plus/4, Commodore 16, and Commodore 128.
The Rockwell AIM-65 computer is a development computer introduced in 1978 based on the MOS Technology 6502 microprocessor. The AIM-65 is essentially an expanded KIM-1 computer. Available software included a line-oriented machine code monitor, BASIC interpreter, assembler, Pascal, PL/65, and Forth development system. Available hardware included a floppy disk controller and a backplane for expansion.
The COSMAC VIP (1977) was an early microcomputer that was aimed at video games. Essentially, it was a COSMAC ELF with a supplementary CDP1861/CDP1864 video display chip. For a price of US$275, it could be purchased from RCA by mail order. It came in kit form, and had to be assembled. Its dimensions were 22 x 28 cm, and it had a RCA 1802 processor; along with a crystal clock operating at 1.76 MHz. It had 2 KB of RAM, which could be expanded to 4 KB on board, and 32 KB via an expansion slot. Its 5V DC CDP18S023 power supply had an output of 600 mA. I/O ports could be added to connect to sensors, interface relays, an ASCII keyboard, or a printer.
The Compukit UK101 microcomputer (1979) is a kit clone of the Ohio Scientific Superboard II single-board computer, with a few enhancements for the UK market - notably replacing the 24×24 screen display with a more useful 48×16 layout working at UK video frequencies. The video output is black and white with 256 semigraphic characters generated by a two kilobyte ROM. It has no bit-mapped graphics capability. The video is output through a UHF modulator, designed to connect to a TV set.
The BBC Master is a home computer released by Acorn Computers in early 1986. It was designed and built for the British Broadcasting Corporation (BBC) and was the successor to the BBC Micro Model B. The Master 128 remained in production until 1993.
The Tangerine Microtan 65 was a 6502 based single board microcomputer, first sold in 1979, which could be expanded into, what was for its day, a comprehensive and powerful system. The design became the basis for what later became the Oric Atmos and later computers, which has similar keyboard addressing and tape I/O as in the Microtan 65. The Microtan 65 has a single step function that can be used for debugging at the hardware level. The computer was available as ready-built boards or as kits consisting of board and components requiring soldering together.
The Machine Operating System (MOS) or OS is a discontinued computer operating system (OS) used in Acorn Computers' BBC computer range. It included support for four-channel sound, graphics, file system abstraction, and digital and analogue input/output (I/O) including a daisy-chained expansion bus. The system was single-tasking, monolithic and non-reentrant.
A microprocessor development board is a printed circuit board containing a microprocessor and the minimal support logic needed for an electronic engineer or any person who wants to become acquainted with the microprocessor on the board and to learn to program it. It also served users of the microprocessor as a method to prototype applications in products.
In computing, the Tube is the expansion interface and architecture of the BBC Microcomputer System which allows the BBC Micro to communicate with a second processor, or coprocessor.
The Dick Smith Super-80 was a Zilog Z80 based kit computer developed as a joint venture between Electronics Australia magazine and Dick Smith Electronics.
The British Broadcasting Corporation Microcomputer System, or BBC Micro, is a series of Microcomputers designed and built by Acorn Computers Limited in the 1980s for the Computer Literacy Project of the BBC. Designed with an emphasis on education, it was notable for its ruggedness, expandability, and the quality of its operating system. An accompanying 1982 television series, The Computer Programme, featuring Chris Serle learning to use the machine, was broadcast on BBC2.
Each time Intel launched a new microprocessor, they simultaneously provided a system development kit (SDK) allowing engineers, university students, and others to familiarise themselves with the new processor's concepts and features. The SDK single-board computers allowed the user to enter object code from a keyboard or upload it through a communication port, and then test run the code. The SDK boards provided a system monitor ROM to operate the keyboard and other interfaces. Kits varied in their specific features but generally offered optional memory and interface configurations, a serial terminal link, audio cassette storage, and EPROM program memory. Intel's Intellec development system could download code to the SDK boards.
A single-board microcontroller is a microcontroller built onto a single printed circuit board. This board provides all of the circuitry necessary for a useful control task: a microprocessor, I/O circuits, a clock generator, RAM, stored program memory and any necessary support ICs. The intention is that the board is immediately useful to an application developer, without requiring them to spend time and effort to develop controller hardware.
The Versatile Laboratory Aid (VELA) is a 4-channel data logging tool that was created as part of a joint venture by Ashley Clarke, Keith Jones and David Binney of Leeds University and Educational Electronics. The VELA was designed to be used as a stand-alone data logger that could be used out in the field and it could then be taken back to the laboratory where it could be connected to a chart printer, oscilloscope or microcomputer for data analysis purposes.
Comp-Sultants, Inc. was an American computer company based in Huntsville, Alabama, active from 1969 to 1977. In 1975, the company released the Micro 440, a microcomputer based on the Intel 4040 microprocessor. It was, by Byte magazine's estimation, the first computer based on that chip.