Surface roughness scattering or interface roughness scattering is the elasticscattering of particles against a rough solid surface or imperfect interface between two different materials. This effect has been observed in classical systems, such as microparticle scattering,[1] as well as quantum systems, where it arises electronic devices, such as field effect transistors and quantum cascade lasers.[2]
In the classical mechanics framework, a rough surface, such as a machined metal surface, randomizes the probability distribution function governing the incoming particles, leading to net momentum loss of the particle flux.[3]
Quantum description
The energy of charged particles in a quantum well is strongly affected by its thickness.
In the quantum mechanical framework, this scattering is most noticeable in confined systems, in which the energies for charge carriers are determined by the locations of interfaces. An example of such a system is a quantum well, which may be constructed from a sandwich of different layers of semiconductor. Variations in the thickness of these layers therefore causes the energy of particles to be dependent on their in-plane location in the layer.[4] Classification of the roughness at a given position, , is complex, but as in the classical models, it has been modeled as a Gaussian distribution by some researchers [5] This assumption may be formulated in terms of the ensemble average for some given characteristic height, , and correlation length, , such that
Types of Scattering
Selective Scattering: In selective Scattering scattering depends upon the wavelength of light.[citation needed]
Mie scattering: Mie theory can describe how electromagnetic waves interact with homogeneously spherical particles. However, a theory for homogeneous spheres will completely fail to predict polarization effects.[6][7] When the size of the molecules is greater than the wavelength of light, the result is a non-uniform scattering of light.[citation needed]
Lambertian Scattering: This type of scattering occurs when a surface has microscopic irregularities that scatter light perfectly uniformly in all directions, causing it to appear equally bright from all viewing angles.
Subsurface Scattering: This type of scattering occurs when light scatters within a material before exiting the surface at a different point.
Isotropic crystal scattering (aka powder diffraction): This type of scattering occurs when every crystalline orientation is represented equally in a powdered sample. Powder X-ray diffraction (PXRD) operates under the assumption that the sample is randomly arranged such that each plane will be represented in the signal.
This section needs expansion. You can help by adding to it. (June 2008)
Notes
↑ Sommerfeld, M., Huber, N. (1999) "Experimental analysis and modelling of particle-wall collisions." International Journal of Multiphase Flow 25(6), 1457–1489
↑ Konan, N.A., Kannengieser, O., Simonin, O. (2009) "Stochastic modeling of the multiple rebound effects for particle-rough wall collisions" International Journal of Multiphase Flow 35(10), 933–945
↑ Sakaki, H.; Noda, T.; Hirakawa, K.; Tanaka, M.; Matsusue, T. (1987), "Interface roughness scattering in GaAs/AlAs quantum wells", Applied Physics Letters, 51 (23): 1934–1936, Bibcode:1987ApPhL..51.1934S, doi:10.1063/1.98305
↑ Jonasz, M., & Fournier, G. R. (2007). Refractive indices and morphologies of aquatic particles. Light Scattering by Particles in Water, 447–558. doi:10.1016/b978-012388751-1/50006-5
In physics, the cross section is a measure of the probability that a specific process will take place in a collision of two particles. For example, the Rutherford cross-section is a measure of probability that an alpha particle will be deflected by a given angle during an interaction with an atomic nucleus. Cross section is typically denoted σ (sigma) and is expressed in units of area, more specifically in barns. In a way, it can be thought of as the size of the object that the excitation must hit in order for the process to occur, but more exactly, it is a parameter of a stochastic process.
Diffraction is the interference or bending of waves around the corners of an obstacle or through an aperture into the region of geometrical shadow of the obstacle/aperture. The diffracting object or aperture effectively becomes a secondary source of the propagating wave. Italian scientist Francesco Maria Grimaldi coined the word diffraction and was the first to record accurate observations of the phenomenon in 1660.
In theoretical physics, quantum field theory (QFT) is a theoretical framework that combines classical field theory, special relativity, and quantum mechanics. QFT is used in particle physics to construct physical models of subatomic particles and in condensed matter physics to construct models of quasiparticles. The current standard model of particle physics is based on quantum field theory.
Rayleigh scattering is the predominantly elastic scattering of light, or other electromagnetic radiation, by particles with a size much smaller than the wavelength of the radiation. For light frequencies well below the resonance frequency of the scattering medium, the amount of scattering is inversely proportional to the fourth power of the wavelength. The phenomenon is named after the 19th-century British physicist Lord Rayleigh.
In physics, scattering is a wide range of physical processes where moving particles or radiation of some form, such as light or sound, are forced to deviate from a straight trajectory by localized non-uniformities in the medium through which they pass. In conventional use, this also includes deviation of reflected radiation from the angle predicted by the law of reflection. Reflections of radiation that undergo scattering are often called diffuse reflections and unscattered reflections are called specular (mirror-like) reflections. Originally, the term was confined to light scattering. As more "ray"-like phenomena were discovered, the idea of scattering was extended to them, so that William Herschel could refer to the scattering of "heat rays" in 1800. John Tyndall, a pioneer in light scattering research, noted the connection between light scattering and acoustic scattering in the 1870s. Near the end of the 19th century, the scattering of cathode rays and X-rays was observed and discussed. With the discovery of subatomic particles and the development of quantum theory in the 20th century, the sense of the term became broader as it was recognized that the same mathematical frameworks used in light scattering could be applied to many other phenomena.
In electromagnetism, the Mie solution to Maxwell's equations describes the scattering of an electromagnetic plane wave by a homogeneous sphere. The solution takes the form of an infinite series of spherical multipole partial waves. It is named after German physicist Gustav Mie.
Matter waves are a central part of the theory of quantum mechanics, being half of wave–particle duality. At all scales where measurements have been practical, matter exhibits wave-like behavior. For example, a beam of electrons can be diffracted just like a beam of light or a water wave.
In electromagnetics, an evanescent field, or evanescent wave, is an oscillating electric and/or magnetic field that does not propagate as an electromagnetic wave but whose energy is spatially concentrated in the vicinity of the source. Even when there is a propagating electromagnetic wave produced, one can still identify as an evanescent field the component of the electric or magnetic field that cannot be attributed to the propagating wave observed at a distance of many wavelengths.
Optical tweezers are scientific instruments that use a highly focused laser beam to hold and move microscopic and sub-microscopic objects like atoms, nanoparticles and droplets, in a manner similar to tweezers. If the object is held in air or vacuum without additional support, it can be called optical levitation.
The Compton wavelength is a quantum mechanical property of a particle, defined as the wavelength of a photon whose energy is the same as the rest energy of that particle. It was introduced by Arthur Compton in 1923 in his explanation of the scattering of photons by electrons.
In condensed matter physics and crystallography, the static structure factor is a mathematical description of how a material scatters incident radiation. The structure factor is a critical tool in the interpretation of scattering patterns obtained in X-ray, electron and neutron diffraction experiments.
In spectroscopy, the Autler–Townes effect, is a dynamical Stark effect corresponding to the case when an oscillating electric field is tuned in resonance to the transition frequency of a given spectral line, and resulting in a change of the shape of the absorption/emission spectra of that spectral line. The AC Stark effect was discovered in 1955 by American physicists Stanley Autler and Charles Townes.
Static light scattering is a technique in physical chemistry that measures the intensity of the scattered light to obtain the average molecular weight Mw of a macromolecule like a polymer or a protein in solution. Measurement of the scattering intensity at many angles allows calculation of the root mean square radius, also called the radius of gyration Rg. By measuring the scattering intensity for many samples of various concentrations, the second virial coefficient, A2, can be calculated.
The transfer-matrix method is a method used in optics and acoustics to analyze the propagation of electromagnetic or acoustic waves through a stratified medium; a stack of thin films. This is, for example, relevant for the design of anti-reflective coatings and dielectric mirrors.
The Kapitza–Dirac effect is a quantum mechanical effect consisting of the diffraction of matter by a standing wave of light. The effect was first predicted as the diffraction of electrons from a standing wave of light by Paul Dirac and Pyotr Kapitsa in 1933. The effect relies on the wave–particle duality of matter as stated by the de Broglie hypothesis in 1924.
Surface plasmon polaritons (SPPs) are electromagnetic waves that travel along a metal–dielectric or metal–air interface, practically in the infrared or visible-frequency. The term "surface plasmon polariton" explains that the wave involves both charge motion in the metal and electromagnetic waves in the air or dielectric ("polariton").
In X-ray or neutron small-angle scattering (SAS), Porod's law, discovered by Günther Porod, describes the asymptote of the scattering intensity I(q) for large scattering wavenumbers q.
Classical nucleation theory (CNT) is the most common theoretical model used to quantitatively study the kinetics of nucleation.
Fluctuation X-ray scattering (FXS) is an X-ray scattering technique similar to small-angle X-ray scattering (SAXS), but is performed using X-ray exposures below sample rotational diffusion times. This technique, ideally performed with an ultra-bright X-ray light source, such as a free electron laser, results in data containing significantly more information as compared to traditional scattering methods.
Rayleigh–Gans approximation, also known as Rayleigh–Gans–Debye approximation and Rayleigh–Gans–Born approximation, is an approximate solution to light scattering by optically soft particles. Optical softness implies that the relative refractive index of particle is close to that of the surrounding medium. The approximation holds for particles of arbitrary shape that are relatively small but can be larger than Rayleigh scattering limits.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
