Sealegs Amphibious Craft | |
---|---|
7.1m Sealegs craft in Russia | |
Overview | |
Manufacturer | Sealegs International Ltd |
Production | 2005 - present |
Assembly | New Zealand: Auckland, New Zealand |
Sealegs Amphibious Craft are a type of amphibious vehicle manufactured by Sealegs International Ltd, a company based in Auckland, New Zealand. Sealegs craft are aluminium fabricated boats fitted with either a hydraulic amphibious system or an Electric amphibious system. [1] Both amphibious systems consist of three wheels – one fitted to the bow and two fitted to the transom of the craft. In craft with the Hydraulic system, these wheels are lifted, lowered and driven by the hydraulic system which is powered by a petrol engine mounted on the deck, [2] In craft with the Electric system, the wheels are equipped with brushless high-torque electric motors, and powered by a central 48-volt 7-kWh lithium battery pack. [1]
Sealegs began production in 2005, and as of September 2015 the company had sold 1000 units into 50 countries. [3]
Sealegs craft can travel up to 39 knots on water and up to 7.5 km/hr on land. [2]
The craft are used in both recreational, and commercial applications worldwide. The commercial applications include but aren't limited to Rescue/response, patrol, and tourism, in the USA, [4] Malaysia, [5] Fiji, [6] Australia, [7] and New Zealand. [8]
Sealegs amphibious craft were invented by New Zealander Maurice Bryham. After prototyping the craft, he partnered with David Mckee Wright to incorporate Sealegs International and begin production in 2005. [3]
In June 2005, business man Maurice Bryham set a new world record for crossing the English Channel in an amphibious vehicle at 43 minutes and 12 seconds. This defeated a record of 1 hour and 40 minutes, set the previous year by Richard Branson in a Gibbs Aquada. [9]
In early 2009, David Mckee Wright crossed the Cook Strait in a Sealegs craft – the first time this was done in an amphibious vehicle. [10]
In 2013, Sealegs CEO David Mckee Wright completed a circumnavigation of the South Island of New Zealand in a Sealegs 7.7m RIB, the first time an amphibious vehicle had done so. [11]
In December 2014, Sealegs released a collaboration with New Zealand boat builder Stabicraft – the Stabicraft 2100 ST (Sealegs Technology). [12]
In September 2015, Sealegs International announced that it had produced and shipped its 1000th Sealegs craft. [3]
In September 2018, International announced the release of the Sealegs Electric. [13]
6.1m Sport RIB [14]
6.1m Sport D-Tube [15]
7.1m Sport RIB [16]
7.5m Hydrasol RIB [17]
7.7m Sport D-Tube [2]
7.7m Full Width Console RIB [18]
7.7m Cabin RIB [19]
8.5m Alloy Cabin [20]
9.0m Hydrasol RIB (previously known as Interceptor 9000) [21]
Stabicraft 2100 ST [12]
All Wheel Drive – Sealegs craft come standard with All Wheel Drive – which was designed to help craft negotiate difficult terrain [22]
Extended Run Time – Original Sealegs craft could run on land for 10 minutes within every hour without overheating the oil in the inboard engine. Sealegs extended run time technology added an oil cooling system, which allows the craft to run for 30 minutes within every hour without overheating. [22]
Power Steering – Sealegs craft are fitted with a Power Steering system. This system can be switched on and off by use of a dash switch. [22]
Enhanced Power Steering - or EPS uses smart PLC and magnetic sensor technology to provide a smooth transition from water to land. While operating a Sealegs craft with EPS on water the bow wheel remains central, but when the craft switches to land operation wheel steering locks in. During the transition, EPS ensures wheel alignment is central.
Automatic Braking System – Sealegs craft are fitted with a hydraulic braking system. This system requires hydraulic pressure to release, meaning that when the craft inboard engine is turned off, or if there is a failure in the hydraulic system, the brakes will lock. [12]
An amphibious vehicle, is a vehicle that is a means of transport, viable on land as well as on water. Amphibious vehicles include amphibious bicycles, ATVs, cars, buses, trucks, combat vehicles, boats and hovercraft.
A rigid inflatable boat (RIB), also rigid-hull inflatable boat or rigid-hulled inflatable boat (RHIB), is a lightweight but high-performance and high-capacity unsinkable boat constructed with a rigid hull bottom joined to side-forming air tubes that are inflated with air to a high pressure so as to give the sides resilient rigidity along the boat’s topsides. The design is stable, light, fast and seaworthy. The inflated collar acts as a life jacket, ensuring that the vessel retains its buoyancy, even if the boat is taking on water. The RIB is an evolutionary development of the inflatable boat with a rubberized fabric bottom that is stiffened with flat boards within the collar to form the deck or floor of the boat.
Hydropneumatic suspension is a type of motor vehicle suspension system, designed by Paul Magès, invented by Citroën, and fitted to Citroën cars, as well as being used under licence by other car manufacturers, notably Rolls-Royce, Maserati and Peugeot. It was also used on Berliet trucks and has more recently been used on Mercedes-Benz cars, where it is known as Active Body Control. The Toyota Soarer UZZ32 "Limited" was fitted with a fully integrated four-wheel steering and a complex, computer-controlled hydraulic Toyota Active Control Suspension in 1991. Similar systems are also widely used on modern tanks and other large military vehicles. The suspension was referred to as oléopneumatique in early literature, pointing to oil and air as its main components.
A motorboat, speedboat or powerboat is a boat that is powered by an engine.
A tiller or till is a lever used to steer a vehicle. The mechanism is primarily used in watercraft, where it is attached to an outboard motor, rudder post or stock to provide leverage in the form of torque for the helmsman to turn the rudder. A tiller may also be used in vehicles outside of water, and was seen in early automobiles.
A steering wheel is a type of steering control in vehicles.
A semi-automatic transmission, is an automobile transmission that combines both parts of an automatic and manual transmission.
The Assault Amphibious Vehicle (AAV)—official designation AAVP-7A1 —is a fully tracked amphibious landing vehicle manufactured by U.S. Combat Systems.
Drive by wire, DbW, by-wire, Steer-by-wire, Fly-by-wire or x-by-wire technology in the automotive industry is the use of electrical or electro-mechanical systems for performing vehicle functions traditionally achieved by mechanical linkages. This technology replaces the traditional mechanical control systems with electronic control systems using electromechanical actuators and human-machine interfaces such as pedal and steering feel emulators. Components such as the steering column, intermediate shafts, pumps, hoses, belts, coolers and vacuum servos and master cylinders are eliminated from the vehicle. This is similar to the fly-by-wire systems used widely in the aviation industry.
In motor vehicles, a power steering system helps drivers steer the vehicle by augmenting steering effort needed to turn the steering wheel, making it easier for the vehicle to turn or maneuver.
HICAS/hīkas/ is Nissan's rear wheel steering system found on cars ranging from the more recent Skyline and Fairlady Z (300ZX) iterations to smaller models like the Nissan Cefiro (A31), 240SX/Silvia /180SX and Nissan Serena/Nissan Largo. It is also found on models from Nissan's Infiniti division, such as the Q45, M45/M35 and G37. Unlike many other four wheel steering systems, HICAS and Super HICAS are fitted to improve handling rather than just as a parking aid.
The LAV-25 is an eight-wheeled amphibious armored reconnaissance vehicle built by General Dynamics Land Systems and used by the United States Marine Corps and the United States Army.
The Learjet 25 is an American ten-seat, twin-engine, high-speed business jet aircraft manufactured by Learjet. It is a stretched version of the Learjet 24.
The CLEVER is a type of tilting three-wheeled motor vehicle that was developed in a collaboration between the University of Bath, BMW and a number of other partners from across Europe. CLEVER is designed as an alternative to conventional means of personal urban transport. The narrow body endows it with some of the manoeuvrability and congestion avoiding capability of a motorcycle, whilst offering comparable weather and impact protection to a car. Carbon emissions are reduced as a function of low weight and a small frontal area. The narrow track width requires that CLEVER tilts into corners to maintain stability; thus it is fitted with a Direct Tilt Control (DTC) system that uses hydraulic actuators linking the cabin to the non-tilting rear engine module.
The Logistics Vehicle System (LVS), is a modular assortment of eight-wheel drive all-terrain vehicle unit combinations used by the United States Marine Corps.
An amphibious all-terrain vehicle (AATV) is a small off-road, and typically six-wheel drive, amphibious vehicle. They were developed in the early 1960s and quickly became popular in both the US and Canada. These vehicles are now used by enthusiasts and professionals worldwide for recreation and industry.
The DefTech AV8Gempita (Thunder) is an amphibious multirole armoured vehicle developed by Malaysian defence company DefTech with the assistance of Turkey defence company FNSS. The Gempita resembles some of the Turkey FNSS Pars design and technology. The vehicle has a modular design which allows the fitting of different turrets, weapons, sensors, and communications systems on the same vehicle. The vehicle has 12 variants, including the armoured personnel carrier, infantry fighting vehicle, tank destroyer, signals intelligence vehicle and recovery vehicles. It is manufactured by DefTech in Pahang, Malaysia.
The Moto Guzzi Triporteurs were wheeled transport motorcycles (triporteurs) of the Moto Guzzi brand. In Italy, they were called "Moto Carri".
Asis Boats is a privately owned company that manufactures inflatable boats, RIBs and similar vessels. The company's headquarters are in Dubai, United Arab Emirates near the Jebel Ali industrial area. It also possesses an office and factory in Maryland, United States.