Self-mixing interferometry

Last updated August 25, 2024

Self-mixing or back-injection laser interferometry is an interferometric technique in which a part of the light reflected by a vibrating target is reflected into the laser cavity, causing a modulation both in amplitude and in frequency of the emitted optical beam. In this way, the laser becomes sensitive to the distance traveled by the reflected beam thus becoming a distance, speed or vibration sensor.^[1] The advantage compared to a traditional measurement system is a lower cost thanks to the absence of collimation optics and external photodiodes.^[2]^[3]

Background

After the development of the classic external interferometric configurations (Michelson and Mach-Zehnder interferometers) which consisted of lenses, beam splitter, mirrors, and corner cube, the possibility of creating a much simpler and more compact system was investigated. Starting in the 1980s, this new configuration known as retro-injection or self-mixing was explored and applications based on the retro-injection effect in commercial laser diodes appeared in the scientific literature.

Typical interferometric fringing signal Fringes.png — Typical interferometric fringing signal

In this type of interferometric configuration the fact is exploited that a small fraction of the light emitted by a laser, after having been reflected by a vibrating target, is re-injected into the laser cavity, where a sort of coherent radiation detection is realized: the power emitted by the laser is in fact modulated both in amplitude (AM) and in frequency (FM), generating a fringes interferometric signal.^[4] This signal is a periodic function of the phase $\Phi$ of the back-scattered field, according to the following relation:

$\Phi =2ks_{0}=2{\frac {2\pi }{\lambda }}s_{0}$

where $k$ is the wave number and $s_{0}$ is the physical distance between the laser source and the moving target. If a phase shift of an entire period is imposed, that is $\Delta \Phi$ = $2\pi$ , we get $\Delta {\text{s}}$ = ${\tfrac {\lambda }{2}}$ . So, if we can see an entire fringe on the oscilloscope screen, we can say that the phase shift due to the movement of the obstacle is $2\pi$ , that is $\lambda$ / $2$ . In this way, by counting the number of visible fringes, it is possible to calculate both the magnitude and the direction of the displacement with a resolution of $\lambda$ / $2$ . This was first demonstrated in 1978 by Silvano Donati.^[5]

Compared to the classic interferometers that refer to Michelson one, this new type of interferometer is considerably simpler, since the laser beam already has all the information related to the signal that is no longer generated by the beating of two beams coming from optical path difference. Therefore, the reference optical path is no longer necessary for measurement and relies only on the interaction between the electric field that travels to the target and the electric field inside the laser cavity.^[2]

AM self-mixing laser interferometry

The trend of the amplitude modulated interferometric signal is shown, generated by a vibrating target (such as an audio speaker) powered through a sinusoidal voltage. For the properties of self-mixing laser interferometry, whenever the vibration of a vibrating target is such that its displacement is greater than or equal to $\lambda _{0}$ / $2$ (where $\lambda _{0}$ is wavelength of employed laser), an interferometric fringe is created. However, with regard to amplitude modulation of the interferometric signal there are basically two consequences:

through the simple counting of the number of fringes generated, it is possible to retrieve the displacement of the target
instruments that use only the amplitude modulation (AM) are not very sensitive

The amplitude modulation (AM) of the emitted optical power is detected by the photodiode of monitor (PD) inside the laser package. In this particular interferometric technique the resolution of the displacement and vibration measurement is limited by a low signal-to-noise ratio or SNR, such that the system is only suitable for slow and wide measurements .^[6]

FM self-mixing laser interferometry

Compared to the reading of the amplitude modulation performed with a photodiode, the reading of the frequency modulation is more complex, since the signal is superimposed on a carrier at the optical frequencies (of the order of THz) invisible to the semiconductor detectors and to the reading electronics, so that techniques (such as a superheterodyne receiver) or complex optical systems to convert frequency modulation into an amplitude modulation would be necessary: in fact by exploiting frequency modulation it would be theoretically possible achieving a higher signal-to-noise ratio and hence a better resolution in the condition of shifts less than half the wavelength. A system capable of converting the frequency modulation into the amplitude one is formed by a Mach-Zehnder interferometer which acts as an optical filter.^[2] The shape of the filter transfer function has a perfectly sinusoidal pattern by changing the frequency of the laser; the sinusoidal profile is repeated for the whole spectrum, due to the interference phenomenon on which the operation of the filter is based: ^[6]

Filter transfer function: $T(v)\cong \mathbf {\Gamma _{AM}} \cdot \mathbf {sin} \left[{\frac {2\pi n_{\text{g}}\Delta \!L}{\lambda }}\right]$

where, $\Gamma _{AM}$ is an amplitude coefficient and $n_{\text{g}}$ is the group index. It is possible to carry out the conversion appropriately by calibrating the path difference $\Delta {\text{L}}$ at any optical frequency (therefore to any laser wavelength). The path difference $\Delta {\text{L}}$ determines both the Free Spectral Range (FSR) of the instrument, coinciding with the bandwidth between two consecutive peaks of the transfer function, and the filter sensitivity. In particular, if the length of the Mach-Zehnder's path difference is large, then the sensitivity of the filter will be high, so that the converted signal amplitude is increased; while, if the length of the Mach-Zehnder's path difference is small, then the sensitivity of the filter will be low, so that the converted signal amplitude is reduced: ^[6]

Filter sensitivity: $\left.{\frac {T(v)}{dv}}\right|_{max}\cong {\frac {2\pi n_{\text{g}}\Delta \!L}{c}}$

In order to design the Mach-Zehnder $\Delta {\text{L}}$ , it is needed achieving a compromise between sensitivity, FSR and dimensions of the filter, taking into account the main sources of noise in the system.^[2]

Noise sources

The noise sources that affect the entire system are related to both amplitude and frequency modulation. In particular, the noise sources related to the AM modulation are due both to the dark current noise, to the shot noise and to the electronics of the monitor photodiode, and to the laser shot noise. Similarly, the noise sources related to FM modulation are due not only to the dark current noise, to the shot noise and to that of the FM photodiode electronics, but also to the contribution of noise related to the laser frequency modulation, which is converted into amplitude noise by the Mach-Zehnder interferometer: this latter type of noise is related to the line width of the laser, which is in turn linked to the random phase of the photons emitted by spontaneous emission.

Compatibly with the noise associated with the electronics of the instrument that will be used for the acquisition of AM and FM signals, it will be possible to reduce the path difference and therefore the noise associated with the interferometric signal, as long as the contribution of dominant noise remains that relative to frequency modulation.^[2]

Related Research Articles

<span class="mw-page-title-main">Frequency modulation</span> Encoding of information in a carrier wave by varying the instantaneous frequency of the wave

Frequency modulation (FM) is the encoding of information in a carrier wave by varying the instantaneous frequency of the wave. The technology is used in telecommunications, radio broadcasting, signal processing, and computing.

In physics, interference is a phenomenon in which two coherent waves are combined by adding their intensities or displacements with due consideration for their phase difference. The resultant wave may have greater intensity or lower amplitude if the two waves are in phase or out of phase, respectively. Interference effects can be observed with all types of waves, for example, light, radio, acoustic, surface water waves, gravity waves, or matter waves as well as in loudspeakers as electrical waves.

In physics, coherence length is the propagation distance over which a coherent wave maintains a specified degree of coherence. Wave interference is strong when the paths taken by all of the interfering waves differ by less than the coherence length. A wave with a longer coherence length is closer to a perfect sinusoidal wave. Coherence length is important in holography and telecommunications engineering.

<span class="mw-page-title-main">Electro-optic modulator</span> Type of optical device

An electro-optic modulator (EOM) is an optical device in which a signal-controlled element exhibiting an electro-optic effect is used to modulate a beam of light. The modulation may be imposed on the phase, frequency, amplitude, or polarization of the beam. Modulation bandwidths extending into the gigahertz range are possible with the use of laser-controlled modulators.

In optics, a Fabry–Pérot interferometer (FPI) or etalon is an optical cavity made from two parallel reflecting surfaces. Optical waves can pass through the optical cavity only when they are in resonance with it. It is named after Charles Fabry and Alfred Perot, who developed the instrument in 1899. Etalon is from the French étalon, meaning "measuring gauge" or "standard".

Mode locking is a technique in optics by which a laser can be made to produce pulses of light of extremely short duration, on the order of picoseconds (10⁻¹² s) or femtoseconds (10⁻¹⁵ s). A laser operated in this way is sometimes referred to as a femtosecond laser, for example, in modern refractive surgery. The basis of the technique is to induce a fixed phase relationship between the longitudinal modes of the laser's resonant cavity. Constructive interference between these modes can cause the laser light to be produced as a train of pulses. The laser is then said to be "phase-locked" or "mode-locked".

The Mach–Zehnder interferometer is a device used to determine the relative phase shift variations between two collimated beams derived by splitting light from a single source. The interferometer has been used, among other things, to measure phase shifts between the two beams caused by a sample or a change in length of one of the paths. The apparatus is named after the physicists Ludwig Mach and Ludwig Zehnder; Zehnder's proposal in an 1891 article was refined by Mach in an 1892 article. Mach–Zehnder interferometry with electrons as well as with light has been demonstrated. The versatility of the Mach–Zehnder configuration has led to its being used in a range of research topics efforts especially in fundamental quantum mechanics.

The Michelson interferometer is a common configuration for optical interferometry and was invented by the 19/20th-century American physicist Albert Abraham Michelson. Using a beam splitter, a light source is split into two arms. Each of those light beams is reflected back toward the beamsplitter which then combines their amplitudes using the superposition principle. The resulting interference pattern that is not directed back toward the source is typically directed to some type of photoelectric detector or camera. For different applications of the interferometer, the two light paths can be with different lengths or incorporate optical elements or even materials under test.

Continuous-wave radar is a type of radar system where a known stable frequency continuous wave radio energy is transmitted and then received from any reflecting objects. Individual objects can be detected using the Doppler effect, which causes the received signal to have a different frequency from the transmitted signal, allowing it to be detected by filtering out the transmitted frequency.

The Sagnac effect, also called Sagnac interference, named after French physicist Georges Sagnac, is a phenomenon encountered in interferometry that is elicited by rotation. The Sagnac effect manifests itself in a setup called a ring interferometer or Sagnac interferometer. A beam of light is split and the two beams are made to follow the same path but in opposite directions. On return to the point of entry the two light beams are allowed to exit the ring and undergo interference. The relative phases of the two exiting beams, and thus the position of the interference fringes, are shifted according to the angular velocity of the apparatus. In other words, when the interferometer is at rest with respect to a nonrotating frame, the light takes the same amount of time to traverse the ring in either direction. However, when the interferometer system is spun, one beam of light has a longer path to travel than the other in order to complete one circuit of the mechanical frame, and so takes longer, resulting in a phase difference between the two beams. Georges Sagnac set up this experiment in 1913 in an attempt to prove the existence of the aether that Einstein's theory of special relativity makes superfluous.

$<span class="mw-page-title-main">Acousto-optic modulator</span> Device which diffracts light via sound waves$

An acousto-optic modulator (AOM), also called a Bragg cell or an acousto-optic deflector (AOD), uses the acousto-optic effect to diffract and shift the frequency of light using sound waves. They are used in lasers for Q-switching, telecommunications for signal modulation, and in spectroscopy for frequency control. A piezoelectric transducer is attached to a material such as glass. An oscillating electric signal drives the transducer to vibrate, which creates sound waves in the material. These can be thought of as moving periodic planes of expansion and compression that change the index of refraction. Incoming light scatters off the resulting periodic index modulation and interference occurs similar to Bragg diffraction. The interaction can be thought of as a three-wave mixing process resulting in sum-frequency generation or difference-frequency generation between phonons and photons.

Quasi-phase-matching is a technique in nonlinear optics which allows a positive net flow of energy from the pump frequency to the signal and idler frequencies by creating a periodic structure in the nonlinear medium. Momentum is conserved, as is necessary for phase-matching, through an additional momentum contribution corresponding to the wavevector of the periodic structure. Consequently, in principle any three-wave mixing process that satisfies energy conservation can be phase-matched. For example, all the optical frequencies involved can be collinear, can have the same polarization, and travel through the medium in arbitrary directions. This allows one to use the largest nonlinear coefficient of the material in the nonlinear interaction.

Pulse compression is a signal processing technique commonly used by radar, sonar and echography to either increase the range resolution when pulse length is constrained or increase the signal to noise ratio when the peak power and the bandwidth of the transmitted signal are constrained. This is achieved by modulating the transmitted pulse and then correlating the received signal with the transmitted pulse.

<span class="mw-page-title-main">Acousto-optics</span> The study of sound and light interaction

Acousto-optics is a branch of physics that studies the interactions between sound waves and light waves, especially the diffraction of laser light by ultrasound through an ultrasonic grating.

Quantum mechanics was first applied to optics, and interference in particular, by Paul Dirac. Richard Feynman, in his Lectures on Physics, uses Dirac's notation to describe thought experiments on double-slit interference of electrons. Feynman's approach was extended to $N$ -slit interferometers for either single-photon illumination, or narrow-linewidth laser illumination, that is, illumination by indistinguishable photons, by Frank Duarte. The $N$ -slit interferometer was first applied in the generation and measurement of complex interference patterns.

In physics and engineering, the envelope of an oscillating signal is a smooth curve outlining its extremes. The envelope thus generalizes the concept of a constant amplitude into an instantaneous amplitude. The figure illustrates a modulated sine wave varying between an upper envelope and a lower envelope. The envelope function may be a function of time, space, angle, or indeed of any variable.

Laser linewidth is the spectral linewidth of a laser beam.

<span class="mw-page-title-main">White light interferometry</span> Measurement technique

As described here, white light interferometry is a non-contact optical method for surface height measurement on 3D structures with surface profiles varying between tens of nanometers and a few centimeters. It is often used as an alternative name for coherence scanning interferometry in the context of areal surface topography instrumentation that relies on spectrally-broadband, visible-wavelength light.

In quantum physics, light is in a squeezed state if its electric field strength Ԑ for some phases $has a quantum uncertainty smaller than that of a coherent state. The term squeezing thus refers to a reduced quantum uncertainty. To obey Heisenberg's uncertainty relation, a squeezed state must also have phases at which the electric field uncertainty is anti-squeezed, i.e. larger than that of a coherent state. Since 2019, the gravitational-wave observatories LIGO and Virgo employ squeezed laser light, which has significantly increased the rate of observed gravitational-wave events.$

Spectral interferometry (SI) or frequency-domain interferometry is a linear technique used to measure optical pulses, with the condition that a reference pulse that was previously characterized is available. This technique provides information about the intensity and phase of the pulses. SI was first proposed by Claude Froehly and coworkers in the 1970s.

References

↑ Fan, Yuanlong; Yu, Yanguang; Xi, Jiangtao; Chicharo, Joe F. (2011-09-10). "Improving the measurement performance for a self-mixing interferometry-based displacement sensing system". Applied Optics. 50 (26): 5064–72. Bibcode:2011ApOpt..50.5064F. doi:10.1364/AO.50.005064. ISSN 0003-6935. PMID 21946986.
1 2 3 4 5 Norgia, M; Bandi, F; Pesatori, A; Donati, S (May 2019). "High-sensitivity vibrometer based on FM self-mixing interferometry". Journal of Physics: Conference Series. 1249 (1): 012020. Bibcode:2019JPhCS1249a2020N. doi: 10.1088/1742-6596/1249/1/012020 . ISSN 1742-6588.
↑ G. Giuliani, M. Norgia, S. Donati, and T. Bosch (2002). Laser diode selfmixing technique for sensing applications. vol. 4, no. 6. p. S283.{{cite book}}: CS1 maint: location (link) CS1 maint: location missing publisher (link) CS1 maint: multiple names: authors list (link)
↑ Donati, Silvano; Norgia, Michele (October 2017). "Self-Mixing Interferometer With a Laser Diode: Unveiling the FM Channel and Its Advantages Respect to the AM Channel". IEEE Journal of Quantum Electronics. 53 (5): 1–10. Bibcode:2017IJQE...5344984D. doi:10.1109/JQE.2017.2744984. ISSN 0018-9197. S2CID 13473617.
↑ S.Donati. "Laser Interferometry by Induced Modulation of the Cavity Field" Journal of Applied Physics vol.49, (1978), pp.495-497.
1 2 3 Norgia, Michele; Melchionni, Dario; Donati, Silvano (2017-09-15). "Exploiting the FM-Signal in a Laser-Diode SMI by Means of a Mach–Zehnder Filter". IEEE Photonics Technology Letters. 29 (18): 1552–1555. Bibcode:2017IPTL...29.1552N. doi:10.1109/LPT.2017.2735899. hdl: 11311/1032546 . ISSN 1041-1135. S2CID 40447033.

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.

[1] Fan, Yuanlong; Yu, Yanguang; Xi, Jiangtao; Chicharo, Joe F. (2011-09-10). "Improving the measurement performance for a self-mixing interferometry-based displacement sensing system". Applied Optics. 50 (26): 5064–72. Bibcode:2011ApOpt..50.5064F. doi:10.1364/AO.50.005064. ISSN 0003-6935. PMID 21946986.

[:0-2] 1 2 3 4 5 Norgia, M; Bandi, F; Pesatori, A; Donati, S (May 2019). "High-sensitivity vibrometer based on FM self-mixing interferometry". Journal of Physics: Conference Series. 1249 (1): 012020. Bibcode:2019JPhCS1249a2020N. doi: 10.1088/1742-6596/1249/1/012020 . ISSN 1742-6588.

[3] G. Giuliani, M. Norgia, S. Donati, and T. Bosch (2002). Laser diode selfmixing technique for sensing applications. vol. 4, no. 6. p. S283.{{cite book}}: CS1 maint: location (link) CS1 maint: location missing publisher (link) CS1 maint: multiple names: authors list (link)

[4] Donati, Silvano; Norgia, Michele (October 2017). "Self-Mixing Interferometer With a Laser Diode: Unveiling the FM Channel and Its Advantages Respect to the AM Channel". IEEE Journal of Quantum Electronics. 53 (5): 1–10. Bibcode:2017IJQE...5344984D. doi:10.1109/JQE.2017.2744984. ISSN 0018-9197. S2CID 13473617.

[5] S.Donati. "Laser Interferometry by Induced Modulation of the Cavity Field" Journal of Applied Physics vol.49, (1978), pp.495-497.

[:1-6] 1 2 3 Norgia, Michele; Melchionni, Dario; Donati, Silvano (2017-09-15). "Exploiting the FM-Signal in a Laser-Diode SMI by Means of a Mach–Zehnder Filter". IEEE Photonics Technology Letters. 29 (18): 1552–1555. Bibcode:2017IPTL...29.1552N. doi:10.1109/LPT.2017.2735899. hdl: 11311/1032546 . ISSN 1041-1135. S2CID 40447033.

[1]

[2]

[3]

[4]

[5]

[6]