Sharps & Hankins model 1862 carbine | |
---|---|
Type | Carbine |
Place of origin | United States |
Service history | |
Used by | United States |
Wars | American Civil War |
Production history | |
Designed | 1862 |
Manufacturer | Sharps & Hankins |
Produced | 1862-1865 |
No. built | 8,000 |
Variants | Navy type (24" barrel; Navy purchased 6,686), Army type (24" barrel; approximately 500 made), short cavalry (19" barrel; approximately 1,000 made) [1] |
Specifications | |
Caliber | .52 |
Action | Breech-loaded |
The Sharps & Hankins Model 1862 carbine was a sliding breech action carbine made by Sharps & Hankins Co. in the 1860s and designed by Christian Sharps. The gun is a rimfire .52 caliber and was made in Philadelphia in a quantity of about 8,000. [1] This firearm, patented on July 9, 1861 by Christian Sharps. The Navy version had a 24-inch barrel with a leather cover to protect the shooters hand from excessive heat caused by continuous firing. The Army version's barrel was blued. The short cavalry version had a 19-inch blued barrel. [2] [3]
Sharps Rifle Manufacturing Company was the manufacturer of the Sharps Rifle. The company was organized by Samuel Robbins and Richard S. Lawrence as a holding company in Hartford, Connecticut, on October 9, 1851 with $100,000 in capital. Despite Sharps departing from the company bearing his name, Sharps Rifle Manufacturing Company produced over 100,000 rifles, but it dissolved in 1881 with the widespread use of repeating rifles.
The Peabody action was an early form of breechloading firearm action, where the heavy breechblock tilted downwards across a bolt mounted in the rear of the breechblock, operated by a lever under the rifle. The Peabody action most often used an external hammer to fire the cartridge.
The LeMat revolver was a .42 or .36 caliber cap & ball black powder revolver invented by Jean Alexandre LeMat of France, which featured an unusual secondary 16 to 20 gauge smooth-bore barrel capable of firing buckshot. It saw service with the armed forces of the Confederate States of America during the American Civil War of 1861–1865 and the Army of the Government of National Defense during the Franco-Prussian War.
Christian Sharps was the inventor of the Sharps rifle, the first commercially successful breech-loading rifle and the Sharps Four Barrel Pistol, and Sharps Breech-Loading Pistol.
The Remington Zig-Zag Derringer, or "Pepper Box", originally termed "Elliot's Pocket Revolver", was made 1861–1862 with fewer than 1,000 manufactured.
Sharps rifles are a series of large-bore, single-shot, falling-block, breech-loading rifles, beginning with a design by Christian Sharps in 1848 and ceasing production in 1881. They were renowned for long-range accuracy. By 1874, the rifle was available in a variety of calibers, and it was one of the few designs to be successfully adapted to metallic cartridge use. The Sharps rifles became icons of the American Old West with their appearances in many Western-genre films and books. Perhaps as a result, several rifle companies offer reproductions of the Sharps rifle.
The Remington-Beals Model Revolvers along with subsequent models and variations were percussion revolvers manufactured by Eliphalet Remington & Sons in .31 (Pocket) .36 (Navy) or .44 (Army) caliber, used during the American Civil War, and was the beginning of a successful line of medium and large frame pistols. They are commonly, though inaccurately, referred to as the Model 1858 due to the patent markings on its New Model barrels, "PATENTED SEPT. 14, 1858/E. REMINGTON & SONS, ILION, NEW YORK, U.S.A./NEW MODEL."; although wide scale production did not start until 1861.
The Colt Lightning Carbine or Colt Lightning Rifle was a slide-action (pump-action) rifle manufactured by Colt from 1884 until 1904 and was originally chambered in .44-40 caliber. Colt eventually made the Lightning Rifle in three different frame sizes, to accommodate a wide range of cartridges, from .22 Short caliber and .38-40 to .50-95 Express. Its profile resembles the pump-action rimfire rifles made by the Winchester Repeating Arms Company and Remington Arms. The Lightning saw use as a sporting arm in America and was adopted for use by the San Francisco Police Department, but was never as popular or as reliable as the various lever-action rifles of its day. It is however reported to have been used by American forces in the Spanish-American War, most likely as privately purchased weapons.
The Merrill carbine was a breechloader firearm designed by Baltimore, Maryland gunsmith and inventor James H. Merrill. It was one of several firearms either manufactured or altered by Merrill in fulfillment of contracts with the Union government during the U.S. Civil War.
The Gallager carbine is an American black powder breechloading percussion rifle produced in the American Civil War.
The Colt M1878 is a double-action revolver that was manufactured by Colt's Manufacturing Company from 1878 until 1907. It is often referred to as the "Frontier" or the "Double Action Army" revolver, and was manufactured to shoot a variety of rimmed, centerfire, and black powder cartridges, in calibers detailed nearby. A total of 51,210 Model 1878 revolvers were manufactured, including 4,600 for the US Ordnance Department. These are known as the "Philippine" or "Alaskan" models.
The Colt M1877 was a double-action revolver manufactured by Colt's Patent Fire Arms from January 1877 until 1909 for a total of 166,849 revolvers. The Model 1877 was offered in three calibers, which lent them three unofficial names: the "Thunderer", the "Lightning", and the "Rainmaker". The principal difference between the models was the cartridge in which they were chambered for, these are the "Thunderer" in .41 Long Colt; the "Lightning" in .38 Long Colt; and the "Rainmaker" in .32 Long Colt. All of the models had a six-round capacity.
The Colt New Police is a double-action, six-shot revolver. This gun was chambered in the .32 New Police, which is very similar to the .32 S&W Long. In addition to the .32 New Police cartridge, the revolver was available in 32 Colt.
Remington Model 1875 Single Action Army was a revolver by E. Remington & Sons. It was based upon the successful New Model Army with both revolvers having the same size, appearance, and the removable cylinder. The new 1875 Remington differed mainly from the older 1858 percussion model by having a bored through cylinder chambered for metallic cartridges. Thus, in 1875, Remington entered the cartridge revolver market with this big-frame, army style revolver, intended to compete with the Colt Peacemaker. Ordinary citizens and Old West lawmen alike recognized the sturdy quality of the new Remington revolvers. This design was followed by the Model 1888 and the Model 1890.
The Colt House Revolver was one of the first metallic cartridge rear-loading revolvers to be produced by the Colt's Patent Fire Arms Manufacturing Company, in 1871. The same year, Colt's also patented the Colt Open Top, another metallic cartridge rear-loader, but in fact the Open Top production didn't start until 1872, although a pocket version of the Open Top, a completely different design, went on sales as of 1871, the Colt Open Top Pocket Model Revolver.
The Remington Model 1890 New Model Army was a revolver by Remington Arms. It was based on the successful Remington Model 1875 and the lesser known Model 1888 with both revolvers having the same size, appearance, and the removable cylinder. The 1890 Remington single-actions kept the solid frame and similar styling of the 1875 model, but lacking the large web under the ejector rod housing and equipped with checkered rubber grips. Like the 1875 model, the 1890 was suitably made for metallic cartridges, but only issued in .44-40 caliber.
The Colt Open Top Pocket Model Revolver was a single action pocket revolver introduced by the Colt's Patent Fire Arms Manufacturing Company in 1871. Introduced a year before the Colt Open Top and two years before the Colt Peacemaker and the Colt New Line, the Colt Open Top Pocket Model Revolver was, alongside the Colt House Revolver, one of the two first metallic cartridge rear-loading revolvers manufactured by Colt's. It also was one of the first pocket metallic cartridge revolvers made by the company.
The Colt-Burgess rifle, also known as the 1883 Burgess rifle or simply the Burgess rifle, is a lever-action repeating rifle produced by Colt's Patent Firearms Manufacturing Company between 1883 and 1885. The Burgess rifle was Colt's only entrance into the lever-action rifle market, produced to compete with Winchester Repeating Arms Company's line of popular rifles. The 1883 Burgess rifle was designed and patented by Andrew Burgess, an American firearms designer and photographer, who sold the design to Colt.
Forehand & Wadsworth was an American firearms manufacturing company based in Worcester, Massachusetts. It was formed in 1871 by Sullivan Forehand and Henry C. Wadsworth after the death of their father-in-law, Ethan Allen of Ethan Allen & Company, and was acquired in 1902 by Hopkins & Allen, a firearms company based in Connecticut.
The Colt model 1839 carbine is an early percussion revolving smoothbore carbine manufactured by the Patent Arms Manufacturing Company between 1838 and 1841. Produced alongside the Colt second model ring lever rifle, the model 1839 was the most popular longarm of the Patent Arms period. The model 1839 carbine is differentiated from Colt's ring lever rifles by the lack of a cocking ring lever and the presence of an external hammer, which, when manually cocked, would rotate the six-shot cylinder to the next position. Approximately 950 model 1839 carbines were manufactured, and an additional shotgun variant, the model 1839 shotgun, was produced from 1839 to 1841 with approximately 225 manufactured. Though the United States Navy and the Texas Navy purchased a number of model 1839 carbines, sales suffered due to the gun's high price and quality control issues.