Silicon nanowire

Last updated

Silicon nanowires, also referred to as SiNWs, are a type of semiconductor nanowire most often formed from a silicon precursor by etching of a solid or through catalyzed growth from a vapor or liquid phase. Such nanowires have promising applications in lithium ion batteries, thermoelectrics and sensors. Initial synthesis of SiNWs is often accompanied by thermal oxidation steps to yield structures of accurately tailored size and morphology. [1]

Contents

SiNWs have unique properties that are not seen in bulk (three-dimensional) silicon materials. These properties arise from an unusual quasi one-dimensional electronic structure and are the subject of research across numerous disciplines and applications. The reason that SiNWs are considered one of the most important one-dimensional materials is they could have a function as building blocks for nanoscale electronics assembled without the need for complex and costly fabrication facilities. [2] SiNWs are frequently studied towards applications including photovoltaics, nanowire batteries, thermoelectrics and non-volatile memory. [3]

Applications

Owing to their unique physical and chemical properties, silicon nanowires are a promising candidate for a wide range of applications that draw on their unique physico-chemical characteristics, which differ from those of bulk silicon material. [1]

SiNWs exhibit charge trapping behavior which renders such systems of value in applications necessitating electron hole separation such as photovoltaics, and photocatalysts. [4] Recent experiment on nanowire solar cells has led to a remarkable improvement of the power conversion efficiency of SiNW solar cells from <1% to >17% in the last few years. [5]

Charge trapping behaviour and tuneable surface governed transport properties of SiNWs render this category of nanostructures of interest towards use as metal insulator semiconductors and field effect transistors, [6] with further applications as nanoelectronic storage devices, [7] in flash memory, logic devices as well as chemical and biological sensors. [3] [8]

The ability for lithium ions to intercalate into silicon structures renders various Si nanostructures of interest towards applications as anodes in Li-ion batteries (LiBs). SiNWs are of particular merit as such anodes as they exhibit the ability to undergo significant lithiation while maintaining structural integrity and electrical connectivity. [9]

Silicon nanowires are efficient thermoelectric generators because they combine a high electrical conductivity, owing to the bulk properties of doped Si, with low thermal conductivity due to the small cross section. [10]

Synthesis

Several synthesis methods are known for SiNWs and these can be broadly divided into methods which start with bulk silicon and remove material to yield nanowires, also known as top-down synthesis, and methods which use a chemical or vapor precursor to build nanowires in a process generally considered to be bottom-up synthesis. [3]

Top down synthesis methods

These methods use material removal techniques to produce nanostructures from a bulk precursor

Bottom-up synthesis methods

Thermal oxidation

Subsequent to physical or chemical processing, either top-down or bottom-up, to obtain initial silicon nanostructures, thermal oxidation steps are often applied in order to obtain materials with desired size and aspect ratio. Silicon nanowires exhibit a distinct and useful self-limiting oxidation behaviour whereby oxidation effectively ceases due to diffusion limitations, which can be modeled. [1] This phenomenon allows accurate control of dimensions and aspect ratios in SiNWs and has been used to obtain high aspect ratio SiNWs with diameters below 5 nm. [15] The self-limiting oxidation of SiNWs is of value towards lithium ion battery materials.

Outlook

There is significant interest in SiNWs for their unique properties and the ability to control size and aspect ratio with great accuracy. As yet, limitations in large-scale fabrication impede the uptake of this material in the full range of investigated applications. Combined studies of synthesis methods, oxidation kinetics and properties of SiNW systems aim to overcome the present limitations and facilitate the implementation of SiNW systems, for example, high quality vapor-liquid-solid–grown SiNWs with smooth surfaces can be reversibly stretched with 10% or more elastic strain, approaching the theoretical elastic limit of silicon, which could open the doors for the emerging “elastic strain engineering” and flexible bio-/nano-electronics. [16]

Related Research Articles

<span class="mw-page-title-main">Chemical vapor deposition</span> Method used to apply surface coatings

Chemical vapor deposition (CVD) is a vacuum deposition method used to produce high-quality, and high-performance, solid materials. The process is often used in the semiconductor industry to produce thin films.

<span class="mw-page-title-main">MEMS</span> Very small devices that incorporate moving components

MEMS is the technology of microscopic devices incorporating both electronic and moving parts. MEMS are made up of components between 1 and 100 micrometres in size, and MEMS devices generally range in size from 20 micrometres to a millimetre, although components arranged in arrays can be more than 1000 mm2. They usually consist of a central unit that processes data and several components that interact with the surroundings.

A nanowire is a nanostructure in the form of a wire with the diameter of the order of a nanometre. More generally, nanowires can be defined as structures that have a thickness or diameter constrained to tens of nanometers or less and an unconstrained length. At these scales, quantum mechanical effects are important—which coined the term "quantum wires".

<span class="mw-page-title-main">Thermoelectric materials</span> Materials whose temperature variance leads to voltage change

Thermoelectric materials show the thermoelectric effect in a strong or convenient form.

<span class="mw-page-title-main">Zinc oxide</span> White powder insoluble in water

Zinc oxide is an inorganic compound with the formula ZnO. It is a white powder that is insoluble in water. ZnO is used as an additive in numerous materials and products including cosmetics, food supplements, rubbers, plastics, ceramics, glass, cement, lubricants, paints, sunscreens, ointments, adhesives, sealants, pigments, foods, batteries, ferrites, fire retardants, semi conductors, and first-aid tapes. Although it occurs naturally as the mineral zincite, most zinc oxide is produced synthetically.

Deep reactive-ion etching (DRIE) is a highly anisotropic etch process used to create deep penetration, steep-sided holes and trenches in wafers/substrates, typically with high aspect ratios. It was developed for microelectromechanical systems (MEMS), which require these features, but is also used to excavate trenches for high-density capacitors for DRAM and more recently for creating through silicon vias (TSVs) in advanced 3D wafer level packaging technology. In DRIE, the substrate is placed inside a reactor, and several gases are introduced. A plasma is struck in the gas mixture which breaks the gas molecules into ions. The ions accelerated towards, and react with the surface of the material being etched, forming another gaseous element. This is known as the chemical part of the reactive ion etching. There is also a physical part, if ions have enough energy, they can knock atoms out of the material to be etched without chemical reaction.

<span class="mw-page-title-main">Carbon nanofiber</span>

Carbon nanofibers (CNFs), vapor grown carbon fibers (VGCFs), or vapor grown carbon nanofibers (VGCNFs) are cylindrical nanostructures with graphene layers arranged as stacked cones, cups or plates. Carbon nanofibers with graphene layers wrapped into perfect cylinders are called carbon nanotubes.

<span class="mw-page-title-main">Nanorod</span>

In nanotechnology, nanorods are one morphology of nanoscale objects. Each of their dimensions range from 1–100 nm. They may be synthesized from metals or semiconducting materials. Standard aspect ratios are 3-5. Nanorods are produced by direct chemical synthesis. A combination of ligands act as shape control agents and bond to different facets of the nanorod with different strengths. This allows different faces of the nanorod to grow at different rates, producing an elongated object.

<span class="mw-page-title-main">Tin selenide</span> Chemical compound

Tin selenide, also known as stannous selenide, is an inorganic compound with the formula SnSe. Tin(II) selenide is a typical layered metal chalcogenide as it includes a group 16 anion (Se2−) and an electropositive element (Sn2+), and is arranged in a layered structure. Tin(II) selenide is a narrow band-gap (IV-VI) semiconductor structurally analogous to black phosphorus. It has received considerable interest for applications including low-cost photovoltaics, and memory-switching devices.

As the world's energy demand continues to grow, the development of more efficient and sustainable technologies for generating and storing energy is becoming increasingly important. According to Dr. Wade Adams from Rice University, energy will be the most pressing problem facing humanity in the next 50 years and nanotechnology has potential to solve this issue. Nanotechnology, a relatively new field of science and engineering, has shown promise to have a significant impact on the energy industry. Nanotechnology is defined as any technology that contains particles with one dimension under 100 nanometers in length. For scale, a single virus particle is about 100 nanometers wide.

<span class="mw-page-title-main">Biointerface</span>

A biointerface is the region of contact between a biomolecule, cell, biological tissue or living organism or organic material considered living with another biomaterial or inorganic/organic material. The motivation for biointerface science stems from the urgent need to increase the understanding of interactions between biomolecules and surfaces. The behavior of complex macromolecular systems at materials interfaces are important in the fields of biology, biotechnology, diagnostics, and medicine. Biointerface science is a multidisciplinary field in which biochemists who synthesize novel classes of biomolecules cooperate with scientists who have developed the tools to position biomolecules with molecular precision, scientists who have developed new spectroscopic techniques to interrogate these molecules at the solid-liquid interface, and people who integrate these into functional devices. Well-designed biointerfaces would facilitate desirable interactions by providing optimized surfaces where biological matter can interact with other inorganic or organic materials, such as by promoting cell and tissue adhesion onto a surface.

A nanowire battery uses nanowires to increase the surface area of one or both of its electrodes, which improves the capacity of the battery. Some designs, variations of the lithium-ion battery have been announced, although none are commercially available. All of the concepts replace the traditional graphite anode and could improve battery performance. Each type of nanowire battery has specific advantages and disadvantages, but a challenge common to all of them is their fragility.

Nanoarchitectures for lithium-ion batteries are attempts to employ nanotechnology to improve the design of lithium-ion batteries. Research in lithium-ion batteries focuses on improving energy density, power density, safety, durability and cost.

As the devices continue to shrink further into the sub-100 nm range following the trend predicted by Moore’s law, the topic of thermal properties and transport in such nanoscale devices becomes increasingly important. Display of great potential by nanostructures for thermoelectric applications also motivates the studies of thermal transport in such devices. These fields, however, generate two contradictory demands: high thermal conductivity to deal with heating issues in sub-100 nm devices and low thermal conductivity for thermoelectric applications. These issues can be addressed with phonon engineering, once nanoscale thermal behaviors have been studied and understood.

<span class="mw-page-title-main">Local oxidation nanolithography</span>

Local oxidation nanolithography (LON) is a tip-based nanofabrication method. It is based on the spatial confinement on an oxidation reaction under the sharp tip of an atomic force microscope.

<span class="mw-page-title-main">Silicon nanotube</span>

Silicon nanotubes are nanoparticles which create a tube-like structure from silicon atoms. As with silicon nanowires, they are technologically important due to their unusual physical properties, which differ fundamentally to those of bulk silicon. The first reports on silicon nanotubes appeared around the year 2000.

Research in lithium-ion batteries has produced many proposed refinements of lithium-ion batteries. Areas of research interest have focused on improving energy density, safety, rate capability, cycle durability, flexibility, and cost.

<span class="mw-page-title-main">Cobalt oxide nanoparticle</span>

In materials and electric battery research, cobalt oxide nanoparticles usually refers to particles of cobalt(II,III) oxide Co
3O
4 of nanometer size, with various shapes and crystal structures.

<span class="mw-page-title-main">Polymer derived ceramics</span>

Polymer derived ceramics (PDCs) are ceramic materials formed by the pyrolysis of preceramic polymers, usually under inert atmosphere.

Zinc oxide (ZnO) nanostructures are structures with at least one dimension on the nanometre scale, composed predominantly of zinc oxide. They may be combined with other composite substances to change the chemistry, structure or function of the nanostructures in order to be used in various technologies. Many different nanostructures can be synthesised from ZnO using relatively inexpensive and simple procedures. ZnO is a semiconductor material with a wide band gap energy of 3.3eV and has the potential to be widely used on the nanoscale. ZnO nanostructures have found uses in environmental, technological and biomedical purposes including ultrafast optical functions, dye-sensitised solar cells, lithium-ion batteries, biosensors, nanolasers and supercapacitors. Research is ongoing to synthesise more productive and successful nanostructures from ZnO and other composites. ZnO nanostructures is a rapidly growing research field, with over 5000 papers published during 2014-2019.

References

  1. 1 2 3 Liu, M.; Peng, J.; et al. (2016). "Two-dimensional modeling of the self-limiting oxidation in silicon and tungsten nanowires". Theoretical and Applied Mechanics Letters. 6 (5): 195–199. arXiv: 1911.08908 . doi: 10.1016/j.taml.2016.08.002 .
  2. ↑ Yi, Cui; Charles M., Lieber (2001). "Functional Nanoscale Electronic Devices Assembled Using Silicon Nanowire Building Blocks". Science. 291 (5505): 851–853. Bibcode:2001Sci...291..851C. doi:10.1126/science.291.5505.851. PMID   11157160.
  3. 1 2 3 4 5 Mikolajick, Thomas; Heinzig, Andre; Trommer, Jens; et al. (2013). "Silicon nanowires–a versatile technology platform". Physica Status Solidi RRL. 7 (10): 793–799. Bibcode:2013PSSRR...7..793M. doi:10.1002/pssr.201307247. S2CID   93989192.
  4. ↑ Tsakalakos, L.; Balch, J.; Fronheiser, J.; Korevaar, B. (2007). "Silicon nanowire solar cells". Applied Physics Letters. 91 (23): 233117. Bibcode:2007ApPhL..91w3117T. doi:10.1063/1.2821113.
  5. ↑ Yu, Peng; Wu, Jiang; Liu, Shenting; Xiong, Jie; Jagadish, Chennupati; Wang, Zhiming M. (2016-12-01). "Design and fabrication of silicon nanowires towards efficient solar cells" (PDF). Nano Today. 11 (6): 704–737. doi:10.1016/j.nantod.2016.10.001.
  6. ↑ Cui, Yi; Zhong, Zhaohui; Wang, Deli; Wang, Wayne U.; Lieber, Charles M. (2003). "High Performance Silicon Nanowire Field Effect Transistors". Nano Letters. 3 (2): 149–152. Bibcode:2003NanoL...3..149C. CiteSeerX   10.1.1.468.3218 . doi:10.1021/nl025875l.
  7. ↑ Tian, Bozhi; Xiaolin, Zheng; et al. (2007). "Coaxial silicon nanowires as solar cells and nanoelectronic power sources". Nature. 449 (7164): 885–889. Bibcode:2007Natur.449..885T. doi:10.1038/nature06181. PMID   17943126. S2CID   2688078.
  8. ↑ Daniel, Shir; et al. (2006). "Oxidation of silicon nanowires". Journal of Vacuum Science & Technology. 24 (3): 1333–1336. Bibcode:2006JVSTB..24.1333S. doi:10.1116/1.2198847.
  9. ↑ Chan, C.; Peng, H.; et al. (2008). "High-performance lithium battery anodes using silicon nanowires". Nature Nanotechnology. 3 (1): 31–35. Bibcode:2008NatNa...3...31C. doi:10.1038/nnano.2007.411. PMID   18654447.
  10. ↑ Zhan, Tianzhuo; Yamato, Ryo; Hashimoto, Shuichiro; Tomita, Motohiro; Oba, Shunsuke; Himeda, Yuya; Mesaki, Kohei; Takezawa, Hiroki; Yokogawa, Ryo; Xu, Yibin; Matsukawa, Takashi; Ogura, Atsushi; Kamakura, Yoshinari; Watanabe, Takanobu (2018). "Miniaturized planar Si-nanowire micro-thermoelectric generator using exuded thermal field for power generation". Science and Technology of Advanced Materials. 19 (1): 443–453. Bibcode:2018STAdM..19..443Z. doi:10.1080/14686996.2018.1460177. PMC   5974757 . PMID   29868148.
  11. ↑ Huang, Z.; Fang, H.; Zhu, J. (2007). "Fabrication of silicon nanowire arrays with controlled diameter, length, and density". Advanced Materials. 19 (5): 744–748. doi:10.1002/adma.200600892. S2CID   136639488.
  12. 1 2 3 Shao, M.; Duo Duo Ma, D.; Lee, ST (2010). "Silicon nanowires–synthesis, properties, and applications". European Journal of Inorganic Chemistry. 2010 (27): 4264–4278. doi:10.1002/ejic.201000634.
  13. ↑ Huang, Zhipeng; Geyer, Nadine; Werner, Peter; Boor, Johannes de; Gösele, Ulrich (2011). "Metal-Assisted Chemical Etching of Silicon: A Review". Advanced Materials. 23 (2): 285–308. doi:10.1002/adma.201001784. ISSN   1521-4095. PMID   20859941. S2CID   205237664.
  14. ↑ Holmes, J.; Keith, P.; Johnston, R.; Doty, C. (2000). "Control of thickness and orientation of solution-grown silicon nanowires". Science. 287 (5457): 1471–1473. Bibcode:2000Sci...287.1471H. doi:10.1126/science.287.5457.1471. PMID   10688792.
  15. ↑ Liu, H.I.; Biegelsen, D.K.; Ponce, F.A.; Johnson, N.M.; Pease, R.F.W. (1994). "Self-limiting oxidation for fabricating sub-5 nm silicon nanowires". Applied Physics Letters. 64 (11): 1383. Bibcode:1994ApPhL..64.1383L. doi:10.1063/1.111914.
  16. ↑ Zhang, H.; Tersoff, J.; Xu, S.; et al. (2016). "Approaching the ideal elastic strain limit in silicon nanowires". Science Advances. 2 (8): e1501382. Bibcode:2016SciA....2E1382Z. doi:10.1126/sciadv.1501382. PMC   4988777 . PMID   27540586.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.