Simca 9

Last updated
Simca 9 Sport
1954 Simca 9 Sport Figoni & Falaschi.jpg
Figoni et Falaschi-bodied Simca 9 Sport coupé
Overview
Production1952–1954
Body and chassis
Body style 2-door hardtop coupé
2-door convertible (rare)
Powertrain
Engine 1221 cc ohv I4
Transmission four-speed manual
Dimensions
Wheelbase 2,443 mm (96.2 in) [1]
Length4,150 mm (163.4 in) [1]
Curb weight 945 kg (2,083 lb)
1954 Simca 9 Sport Figoni et Falaschi rear view 1954 Simca 9 Sport Figoni et Falaschi.jpg
1954 Simca 9 Sport Figoni et Falaschi rear view

The Simca 9 is a French sports car produced by French automaker Simca. It first appeared in June 1952 and was built until 1954. It was a development of the Simca 8, from which it differed by being lengthened a bit (a few centimetres or inches) between the rear edge of the door and the bulge of the rear fender, to provide more interior room. More importantly, the 9 Sport was of a unibody design. [2] This meant that the car was not offered as a convertible, although a small number of 9 Sport convertibles were built, using the chassis of the earlier 8 Sport. [2] The mechanics were the same as for the Simca Aronde, although the engine was upgraded from 45 to 50 CV (33 to 37 kW). [1] Its running gear was similar to that of the Simca 8 Sport, with the same iteration of the engine, benefitting from a higher compression ratio. The car was built by Facel-Métallon in Colombes. In September 1952, the 1953 Simca 9 Sport featured all-new bodywork, curvier and with more glazing. Again, it featured steel bodywork of Facel's manufacture, and, again, it was heavier and thus no faster than the Aronde sedan on which the expensive Sport was based. [3] A single convertible prototype was built. [3] For model year 1954 the only difference was redesigned hubcaps with a stylized "S". The 9 Sport name was then retired as of September 1954. [4] For 1955 the car was renamed the Simca Coupé de Ville (with the same bodywork), with full equipment and downplaying the "sport" aspect.

1955 Simca Coupe de Ville, with the Facel bodywork as used since late 1952. Simca Coupe de Ville 1955.jpg
1955 Simca Coupé de Ville, with the Facel bodywork as used since late 1952.

Related Research Articles

<span class="mw-page-title-main">Facel Vega</span> French automobile manufacturer

Facel S.A. was a French manufacturer of pressed steel automobile components, later complete automobiles of their own design.

<span class="mw-page-title-main">Chappe et Gessalin</span>

Chappe et Gessalin is the short-form of the name of French coachbuilder "Carrosserie Chappe Frères et Gessalin". The company built automobile bodies and did contract assembly for other automobile manufacturers. It was also the parent of Automobiles CG, a French automobile maker founded in 1966 which built and sold complete cars under its own name.

<span class="mw-page-title-main">Simca</span> Automobile company

Simca was a French automaker, founded in November 1934 by Fiat S.p.A. and directed from July 1935 to May 1963 by Italian Henri Pigozzi. Simca was affiliated with Fiat and, after Simca bought Ford's French subsidiary, became increasingly controlled by Chrysler. In 1970, Simca became a brand of the Chrysler's European business, ending its period as an independent company. Simca disappeared in 1978, when Chrysler divested its European operations to another French automaker, PSA Peugeot Citroën. PSA replaced the Simca brand with Talbot after a short period when some models were badged as Simca-Talbots.

<span class="mw-page-title-main">Talbot-Lago</span> Automobile manufacturer (1920–1959)

Talbot-Lago was a French automobile manufacturer based in Suresnes, Hauts de Seine, outside Paris. The company was owned and managed by Antonio Lago, an Italian engineer that acquired rights to the Talbot brand name after the demise of Darracq London's subsidiary Automobiles Talbot France in 1936.

<span class="mw-page-title-main">Ford Comète</span> Motor vehicle

The Ford Comète is a car that was built between 1951 and 1954 in France by Ford SAF. Intended as the luxury model in the range, the Comète's bodywork was built by FACEL, who later produced the better-known Facel Vega luxury cars under their own name. The original engine was a 2.2 L V8 produced by Ford SAF of French design, also used in the Ford Vedette, with a Pont-à-Mousson 4-speed manual transmission fitted.

<span class="mw-page-title-main">O.S.C.A.</span> Defunct Italian automobile producer

O.S.C.A. was an Italian manufacturer of racing and sports cars established 1947 in San Lazzaro di Savena, Bologna, by the Maserati brothers, and closed down in 1967. The company name is usually written OSCA or Osca.

<span class="mw-page-title-main">Simca Vedette</span> 1950s-1960s French car

The Simca Vedette is a large car, manufactured from 1954 to 1961 by French automaker Simca, at their factory in Poissy, France. The Vedette competed in France's large car market at a time when the economy was finally returning to growth, and enjoyed moderate success with its American style finished off by the Italian designer Rapi. It was marketed with different model names according to trim and equipment levels. The Vedette was Simca's largest model at that time and it spawned a more economical version, the Simca Ariane.

<span class="mw-page-title-main">Ford Vedette</span> Motor vehicle

The Ford Vedette is a large car formerly manufactured by Ford SAF in their Poissy plant from 1948-1954.

<span class="mw-page-title-main">Simca Ariane</span> Motor vehicle

The Simca Ariane is a large saloon car launched in April 1957 by the French automaker Simca and manufactured in the company's factory at Poissy until 1963.

<span class="mw-page-title-main">Matra Bagheera</span> Motor vehicle

The Matra Bagheera is a sports car built by the automotive division of the French engineering group Matra in cooperation with automaker Simca. It was marketed as the Matra-Simca Bagheera until its final year of production, when its designation was changed to the Talbot-Matra Bagheera following Chrysler Europe's demise and subsequent takeover by PSA.

<span class="mw-page-title-main">Simca Aronde</span> Motor vehicle

The Simca Aronde is an automobile which was manufactured by the French automaker Simca from 1951 to 1964. It was Simca's first original design, as well as the company's first unibody car. "Aronde" means "swallow" in Old French and it was chosen as the name for the model because Simca's logo at that time was a stylized swallow.

<span class="mw-page-title-main">Lancia Appia</span> Motor vehicle

The Lancia Appia is a passenger car introduced in 1953 by Italian car manufacturer Lancia as a replacement for the Ardea, and which remained in production for ten years. The Appia was the last in a long line of Lancia production cars dating back to the Lancia Lambda to use sliding pillar front suspension. All three series produced had a 1089cc Lancia V4 engine.

<span class="mw-page-title-main">Facel Vega FV</span> Motor vehicle

The Facel Vega FV/FVS is a car produced by French automaker Facel from 1954 until 1959. It continued to be built until 1962 as the HK500.

Autobleu was a French automotive parts manufacturer based in Paris. They produced a variety of components, but were best known for their intake and exhaust manifolds. They also built a small number of customized cars based on models from larger manufacturers.

<span class="mw-page-title-main">Simca 1000 Coupé</span> Motor vehicle

The Simca Coupé 1000 and its successor, the Simca 1200S are small, rear-engined two-door coupés which were produced by Simca between 1962 and 1971. Simca also provided the engine and the mechanical underpinnings while the small elegant bodies were built in Turin by Bertone before being transferred for final assembly to Simca's Poissy plant and an assembly plant in Rotterdam on specially configured trains.

<span class="mw-page-title-main">DB Le Mans</span> Motor vehicle

The DB Le Mans is a fibreglass-bodied two-door sports car with front-wheel drive, built in France from 1959 until 1964. Originally equipped with Panhard two-cylinder boxers, the cars built by René Bonnet had Renault four-cylinder engines. The car, with pronounced tailfins and more comfortable than previous efforts by DB was aimed squarely at the US market.

<span class="mw-page-title-main">Renault Nervasport</span> Motor vehicle

The Renault Nervasport was a straight-eight engined sporting luxury automobile introduced by Renault in March 1932 and produced until 1935. It was based on the larger and heavier Nervastella. A more streamlined version called the Nerva Grand Sport appeared in 1935 and replaced the Nervasport, remaining in production until the summer of 1937. As with many Renaults during the 1930s, type changes as well as small often cosmetic facelifts and upgrades appeared frequently.

Jean Waldruche de Montrémy (1913–1998) was a French industrialist, racing driver, motorsport official, and race car designer.

Établissements Monopole was a French manufacturing company that produced parts for automobile engines. The company also built and raced a series of small displacement endurance racing cars. After a series of mergers and acquisitions the Monopole name was retired in Europe, but survives in Africa in the name of a former licensee.

Pichon-Parat was a French carrosserie based in the commune of Sens, in the department of Yonne. Established in 1952, it was known for producing custom cabriolet, coupé, estate car, and shooting brake conversions of established models from major automakers, and for building their own distinctive sporting models with completely original bodywork.

References

  1. 1 2 3 Biscaretti di Ruffia, Carlo (1952-11-25), Auto 1953, Venice, Italy: Alfieri Editore, p. 173
  2. 1 2 Jean-Jacques (2002-09-01). "Simca 8 & 9 Sport: 1952: Année de transition" [1952: a year of change]. Simca by Facel (in French).
  3. 1 2 Jean-Jacques (2002-09-01). "Simca 8 & 9 Sport: 1953: Nouvelle ligne" [1953: a new line]. Simca by Facel (in French).
  4. Jean-Jacques (2002-09-01). "Simca 8 & 9 Sport: 1954: Rideau sur la 9 Sport" [1954: curtains for the 9 Sport]. Simca by Facel (in French).