This article needs additional citations for verification .(September 2021) |
A sine quadrant (Arabic : الربع المجيب, romanized: rub‘ul mujayyab), sometimes known as a "sinecal quadrant", was a type of quadrant used by medieval Arabic astronomers. The instrument could be used to measure celestial angles, tell time, find directions, perform trigonometric computations, and determine the apparent positions of any celestial object for any time. The name is derived from the Arabic rub meaning 'a quarter' and mujayyab meaning 'marked with sine'. [1]
The sine quadrant was described by Muhammad ibn Mūsā al-Khwārizmī in 9th-century Baghdad, and was used throughout the medieval Islamic period to determine the proper times for Islamic prayer. [2] These instruments, with poor angular resolution, were not principally intended to function with stars at night as an astronomical measuring device.[ citation needed ] It is impractical to sight a star through the front aperture unless it is on a fixed, stabilized mount relative to the half degree width of a very intense Sun.
The instrument is a quarter of a circle made of wood or metal (usually brass) divided on its arc side into 90 equal parts or degrees. The 90 divisions are gathered in 18 groups of five degrees each and are generally numbered both ways from the ends of the arc. That is, one set of numbers begins at the left end of the arc and counts up to 90 at the right end, while the other starts on the right and the 90 is at the left. This double numbering enables the instrument to measure either celestial altitude or zenith distance or both simultaneously.
At the apex—where the two graduated straight sides of the grid pattern meet in a right angle—is a thin cord strung through a pin hole and weighted with a small bead. The cord is called a khait and is used as a plumb line when measuring celestial altitudes. It is also used to indicate angles when doing calculations with the instrument; the sliding bead facilitates trigonometric calculations. This plumb line serves two functions: first, it indicates the angular orientation of the instrument, and second, it ensures the instrument is parallel to the vertical plane (perpendicular with the ground) when optically aligned with the target.
Traditionally, the line from the beginning of the arc to the apex is called the jaibs and the line from the end of the arc to the apex is called the jaib tamams. Because the arc is numbered in both directions, these labels are not attached to one straight side or the other, but are instead relative to the measurement or calculation being performed.
Like the arc, both the jaibs and jaib tamams are divided into 60 equal units gathered in groups of five, numbered in both directions to and from the apex. The sixty lines parallel to the jaibs are called sitheeniys or sixtys, and the sixty lines parallel to the jaib tamams are called juyoobul mabsootah. The reason for sixty divisions along the jaibs and jaib tamams is that the instrument uses the sexagesimal number system. It is graduated to the number base 60 and not to the base 10 (decimal system) presently used. Time, angular measurement, and geographical coordinate measurements are about the only holdovers from the Sumerian/Babylonian number system that are still used.
On one of the straight edges of the non-maritime quadrant (solid sheet form) are two alignment plates called hadafatani, each with a small central aperture (pinhole). These two apertures form an optical axis through which the user sights an inclined object, such as a star at night.
The maritime (navigation) version of these devices is skeletal in design rather than a solid sheet form, so as to limit buffeting or movement of the instrument from wind while in the operator's hand.
During the day, the Sun's altitude can be determined by aligning the apertures such that sunlight passes through both and projects a bright illuminated dot onto a surface (such as the user's finger or the screen plate of a mariner's backstaff). The apertures are not viewing holes for sighting the Sun with the naked eye.
The second aperture also attenuates (darkens) the incoming sunlight by masking any annulus-shaped sunlight reflecting off the metal first aperture. This is similar to an iris in a camera lens reducing the light intensity.
Typically, the instrument is orientated such that the user faces looking slightly down upon the scale, with the Sun at the user's left and the right hand placed in such a way that a finger functions as a projection screen. When the apertures are optically aligned with the Sun, the user reads the angular measurement of the point where the graduated arc is bisected by the hanging plumb line.
A misconception by non-astronomers and non-navigators is that using the instrument requires two people: one to take the sight and one to read the plumb line's angular position.[ citation needed ] Actually, when measuring the Sun's altitude, the instrument is held flush (face on) and below eye level by a single user, meaning they can read the cord's angular position on the face of the instrument. However, it does help to have another person to write down the scale readings as they are taken; the device cannot be held sufficiently stable (retaining the optical alignment) with just one hand.
Parallax is a displacement or difference in the apparent position of an object viewed along two different lines of sight and is measured by the angle or half-angle of inclination between those two lines. Due to foreshortening, nearby objects show a larger parallax than farther objects, so parallax can be used to determine distances.
A sextant is a doubly reflecting navigation instrument that measures the angular distance between two visible objects. The primary use of a sextant is to measure the angle between an astronomical object and the horizon for the purposes of celestial navigation.
Celestial navigation, also known as astronavigation, is the practice of position fixing using stars and other celestial bodies that enables a navigator to accurately determine their actual current physical position in space or on the surface of the Earth without relying solely on estimated positional calculations, commonly known as dead reckoning. Celestial navigation is performed without using satellite navigation or other similar modern electronic or digital positioning means.
An armillary sphere is a model of objects in the sky, consisting of a spherical framework of rings, centered on Earth or the Sun, that represent lines of celestial longitude and latitude and other astronomically important features, such as the ecliptic. As such, it differs from a celestial globe, which is a smooth sphere whose principal purpose is to map the constellations. It was invented separately, in ancient China possibly as early as the 4th century BC and ancient Greece during the 3rd century BC, with later uses in the Islamic world and Medieval Europe.
A theodolite is a precision optical instrument for measuring angles between designated visible points in the horizontal and vertical planes. The traditional use has been for land surveying, but it is also used extensively for building and infrastructure construction, and some specialized applications such as meteorology and rocket launching.
An alidade or a turning board is a device that allows one to sight a distant object and use the line of sight to perform a task. This task can be, for example, to triangulate a scale map on site using a plane table drawing of intersecting lines in the direction of the object from two or more points or to measure the angle and horizontal distance to the object from some reference point's polar measurement. Angles measured can be horizontal, vertical or in any chosen plane.
The torquetum or turquet is a medieval astronomical instrument designed by persons unknown to take and convert measurements made in three sets of coordinates: horizon, equatorial, and ecliptic. It is characterised by R. P. Lorch as a combination of Ptolemy's astrolabon and the plane astrolabe. In a sense, the torquetum is an analog computer.
An inclinometer or clinometer is an instrument used for measuring angles of slope, elevation, or depression of an object with respect to gravity's direction. It is also known as a tilt indicator, tilt sensor, tilt meter, slope alert, slope gauge, gradient meter, gradiometer, level gauge, level meter, declinometer, and pitch & roll indicator. Clinometers measure both inclines and declines using three different units of measure: degrees, percentage points, and topos. The astrolabe is an example of an inclinometer that was used for celestial navigation and location of astronomical objects from ancient times to the Renaissance.
The backstaff is a navigational instrument that was used to measure the altitude of a celestial body, in particular the Sun or Moon. When observing the Sun, users kept the Sun to their back and observed the shadow cast by the upper vane on a horizon vane. It was invented by the English navigator John Davis, who described it in his book Seaman's Secrets in 1594.
Edmund Gunter, was an English clergyman, mathematician, geometer and astronomer of Welsh descent. He is best remembered for his mathematical contributions, which include the invention of the Gunter's chain, the Gunter's quadrant, and the Gunter's scale. In 1620, he invented the first successful analogue device which he developed to calculate logarithmic tangents.
A milliradian is an SI derived unit for angular measurement which is defined as a thousandth of a radian (0.001 radian). Milliradians are used in adjustment of firearm sights by adjusting the angle of the sight compared to the barrel. Milliradians are also used for comparing shot groupings, or to compare the difficulty of hitting different sized shooting targets at different distances. When using a scope with both mrad adjustment and a reticle with mrad markings, the shooter can use the reticle as a ruler to count the number of mrads a shot was off-target, which directly translates to the sight adjustment needed to hit the target with a follow-up shot. Optics with mrad markings in the reticle can also be used to make a range estimation of a known size target, or vice versa, to determine a target size if the distance is known, a practice called "milling".
The triquetrum was the medieval name for an ancient astronomical instrument first described by Ptolemy in the Almagest. Also known as Parallactic Rulers, it was used for determining altitudes of heavenly bodies. Ptolemy calls it a "parallactic instrument" and seems to have used it to determine the zenith distance and parallax of the Moon.
Navigational instruments are instruments used by nautical navigators and pilots as tools of their trade. The purpose of navigation is to ascertain the present position and to determine the speed, direction, etc. to arrive at the port or point of destination.
Stadiametric rangefinding, or the stadia method, is a technique of measuring distances with a telescopic instrument. The term stadia comes from a Greek unit of length Stadion which was the typical length of a sports stadium of the time. Stadiametric rangefinding is used for surveying and in the telescopic sights of firearms, artillery pieces, or tank guns, as well as some binoculars and other optics. It is still widely used in long-range military sniping, but in many professional applications it is being replaced with microwave, infrared, or laser rangefinding methods. Although much easier to use, electronic rangefinders can give away the shooter's position to a well-equipped adversary, and the need for accurate range estimation has existed for much longer than electronic rangefinders small and rugged enough to be suitable for military use.
The meridian circle is an instrument for timing of the passage of stars across the local meridian, an event known as a culmination, while at the same time measuring their angular distance from the nadir. These are special purpose telescopes mounted so as to allow pointing only in the meridian, the great circle through the north point of the horizon, the north celestial pole, the zenith, the south point of the horizon, the south celestial pole, and the nadir. Meridian telescopes rely on the rotation of the sky to bring objects into their field of view and are mounted on a fixed, horizontal, east–west axis.
The mariner's astrolabe, also called sea astrolabe, was an inclinometer used to determine the latitude of a ship at sea by measuring the sun's noon altitude (declination) or the meridian altitude of a star of known declination. Not an astrolabe proper, the mariner's astrolabe was rather a graduated circle with an alidade used to measure vertical angles. They were designed to allow for their use on boats in rough water and/or in heavy winds, which astrolabes are ill-equipped to handle. It was invented by the Portuguese people, a nation known for its maritime prowess that dominated the sea for multiple centuries. In the sixteenth century, the instrument was also called a ring.
In astronomy, sextants are devices depicting a sixth of a circle, used primarily for measuring the position of stars. There are two types of astronomical sextants, mural instruments and frame-based instruments.
A mural instrument is an angle measuring instrument mounted on or built into a wall. For astronomical purposes, these walls were oriented so they lie precisely on the meridian. A mural instrument that measured angles from 0 to 90 degrees was called a mural quadrant. They were utilized as astronomical devices in ancient Egypt and ancient Greece. Edmond Halley, due to the lack of an assistant and only one vertical wire in his transit, confined himself to the use of a mural quadrant built by George Graham after its erection in 1725 at the Royal Observatory, Greenwich. Bradley's first observation with that quadrant was made on 15 June 1742.
A quadrant is an instrument used to measure angles up to 90°. Different versions of this instrument could be used to calculate various readings, such as longitude, latitude, and time of day. Its earliest recorded usage was in ancient India in Rigvedic times by Rishi Atri to observe a solar eclipse. It was then proposed by Ptolemy as a better kind of astrolabe. Several different variations of the instrument were later produced by medieval Muslim astronomers. Mural quadrants were important astronomical instruments in 18th-century European observatories, establishing a use for positional astronomy.
Reflecting instruments are those that use mirrors to enhance their ability to make measurements. In particular, the use of mirrors permits one to observe two objects simultaneously while measuring the angular distance between the objects. While reflecting instruments are used in many professions, they are primarily associated with celestial navigation as the need to solve navigation problems, in particular the problem of the longitude, was the primary motivation in their development.