Skarp Technologies

Last updated

Skarp Technologies, Inc. is a US company (registered on August 12, 2015, no. 201522510335) based in Irvine, California. Co-founded by Morgan Gustavsson and Paul Binun, [1] the company gained public attention in October 2015 when it launched a Kickstarter campaign to promote the Skarp Laser Razor. [2] [3] [4] It gained more than 4 million dollars worth of pledges in less than three weeks. However, on October 12, the campaign was cancelled by Kickstarter, who alleged that Skarp acted in violation of their rules. [5] A new Indiegogo campaign was launched within hours of the Kickstarter suspension, and it subsequently raised over $500,000 US with a claim that the device would be released to backers in March 2016. [5] [6] According to an update from Skarp in June 2019, the razor was still under development and had not entered production. [7]

Contents

Skarp Laser Razor

Skarp Technology claims to be currently developing the Skarp Laser Razor. The razor is claimed to be able to cut hairs by targeting the chromophores in hair by transmitting it through an optical fiber. [8] This differs from laser hair removal treatments that target the hair follicles. [9] According to Skarp Technologies, the razor is to be powered by a AAA battery which will last for a month, the device will be waterproof, and the size will be consistent with that of a disposable razor. [10]

Reports have suggested that the technology may be feasible, but questions have been raised about its efficacy and ability to be made in the time that Skarp Technologies proposed. [10] [11] [8]

As of April 2024, the product has still not seen any official release. The last campaign update on Indiegogo was 29 March 2022 by Morgan Gustavsson. No update has followed since. Since this time the Indiegogo page has been 'awaiting update' for a considerable time. Skarp's own email address now no longer exists and Indiegogo has failed to respond to any emails relating to Skarp.

Crowdfunding campaigns

In September 2015, Skarp started a Kickstarter campaign for their product, the Skarp Laser Razor, asking for $160,000 US. [2] The campaign rapidly passed the target amount, hitting over $700,000 in eight days, [2] and reaching over $4,000,000. [5] However, before the funds were due to be collected, Kickstarter cancelled the campaign, stating that Skarp were in violation of their rules for failing to provide a working prototype of their product. [5] At the time Skarp Technologies had claimed that they had initial agreements with manufacturers in place, but while they had demonstrated part of the functionality, it was deemed to not meet Kickstarter's prototype requirements. [12] Skarp countered by saying that they did have a working prototype, but that it had encountered performance limitations due to the very thin filament and problems with mounting it on the razor, which would be overcome once higher quality materials became available as part of the manufacturing process. [13] CNET investigated Skarp Technologies' claims, and found that they did have a laser filament that was capable of cutting single hairs, although they noted that the filament was fragile and prone to breaking, and that it could not cut more than one hair at a time. [11] Nevertheless, CNET also noted that the prototype did not meet the description provided in the Kickstarter campaign, as "Skarp showed off a razor that seemed to contain a laser and a battery and promised a close shave, but had only yet constructed a loose optical fiber and laser assembly that can cut one or two hairs at a time". [11]

After being cancelled on Kickstarter, Skarp moved to Indiegogo where they launched a new campaign for their product. [5] This was successful, and Skarp were able to raise over $500,000 using Indiegogo's "flexible funding" model, while offering the same shipping date of March 2016. [5] [14] Having failed to meet the release date, in July 2016 CENET reported that Skarp Technologies was running behind schedule, but had engaged Will King as chief marketing officer and adviser. [15] At the time, the release date was put back to "at least the end of 2016". [15] This release date was subsequently missed, and in May 2018 Skarp Technologies reported that the razor was still in development and had not yet entered production. [7] As of June 2021 nothing has changed and multiple complaints on the Indiegogo campaign have gone unanswered. As of 12/2019 a lawsuit was opened between the partners of Skarp for a breach of contract between Morgan Gustavsson and Paul Binun and is ongoing as of 9/2021.

Last campaign update on Inidiegogo was 29 March 2022 by Morgan Gustavsson, with an estimated next update Q1 2023.

On February 17, 2023, Morgan Gustavsson filed for Chapter 7 Bankruptcy. [16]

See also

Related Research Articles

<span class="mw-page-title-main">Hair removal</span> Temporary body hair removal

Hair removal is the deliberate removal of body hair or head hair. This process is also known as epilation or depilation.

<span class="mw-page-title-main">Shaving</span> Removal of hair with a razor or others bladed implement

Shaving is the removal of hair, by using a razor or any other kind of bladed implement, to slice it down—to the level of the skin or otherwise. Shaving is most commonly practiced by men to remove their facial hair and by women to remove their leg and underarm hair. A man is called clean-shaven if he has had his beard entirely removed.

Intense pulsed light (IPL) is a technology used by cosmetic and medical practitioners to perform various skin treatments for aesthetic and therapeutic purposes, including hair removal, photorejuvenation as well as to alleviate dermatologic diseases such as acne. IPL is increasingly used in optometry and ophthalmology as well, to treat evaporative dry eye disease due to meibomian gland dysfunction.

<span class="mw-page-title-main">Safety razor</span> Shaving implement

A safety razor is a shaving implement with a protective device positioned between the edge of the blade and the skin. The initial purpose of these protective devices was to reduce the level of skill needed for injury-free shaving, thereby reducing the reliance on professional barbers.

<span class="mw-page-title-main">Laser hair removal</span> Process of hair removal by exposure to laser pulses

Laser hair removal is the process of hair removal by means of exposure to pulses of laser light that destroy the hair follicle. It had been performed experimentally for about twenty years before becoming commercially available in 1995–1996. One of the first published articles describing laser hair removal was authored by the group at Massachusetts General Hospital in 1998. Laser hair removal is widely practiced in clinics, and even in homes using devices designed and priced for consumer self-treatment. Many reviews of laser hair removal methods, safety, and efficacy have been published in the dermatology literature.

Gillette is an American brand of safety razors and other personal care products including shaving supplies, owned by the multi-national corporation Procter & Gamble (P&G). Based in Boston, Massachusetts, United States, it was owned by The Gillette Company, a supplier of products under various brands until that company merged into P&G in 2005. The Gillette Company was founded by King C. Gillette in 1901 as a safety razor manufacturer.

<span class="mw-page-title-main">Pseudofolliculitis barbae</span> Medical condition

Pseudofolliculitis barbae (PFB) is a type of irritant folliculitis that commonly affects people who have curly or coarse facial hair. It occurs when hair curls back into the skin after shaving, causing inflammation, redness, and bumps. This can lead to ingrown hairs, scarring, and skin discoloration. PFB can be treated with various methods, including changing shaving habits, using topical creams or ointments, and undergoing laser hair removal. Prevention measures include proper shaving techniques, using sharp razors, and avoiding too close a shave.

<span class="mw-page-title-main">Ingrown hair</span> Medical condition

Ingrown hair is a condition where a hair curls back or grows sideways into the skin. The condition is most prevalent among people who have coarse or curly hair. It may or may not be accompanied by an infection of the hair follicle (folliculitis) or "razor bumps", which vary in size. While ingrown hair most commonly appears in areas where the skin is shaved or waxed, it can appear anywhere. Anything that causes the hair to be broken off unevenly with a sharp tip can cause ingrown hairs. Ingrown hairs are also caused because of lack of natural exfoliation in the skin.

<span class="mw-page-title-main">Kickstarter</span> US-based crowdfunding platform

Kickstarter, PBC is an American public benefit corporation based in Brooklyn, New York, that maintains a global crowdfunding platform focused on creativity. The company's stated mission is to "help bring creative projects to life". As of February 2023, Kickstarter has received US$7 billion in pledges from 21.7 million backers to fund 233,626 projects, such as films, music, stage shows, comics, journalism, video games, board games, technology, publishing, and food-related projects.

<span class="mw-page-title-main">Indiegogo</span> American crowdfunding website

Indiegogo is an American crowdfunding website founded in 2008 by Danae Ringelmann, Slava Rubin, and Eric Schell. Its headquarters are in San Francisco, California. The site is one of the first sites to offer crowd funding. Indiegogo allows people to solicit funds for an idea, charity, or start-up business. Indiegogo charges a 5% fee on contributions. This charge is in addition to Stripe credit card processing charges of 2,9% + $0.30 per transaction. Fifteen million people visit the site each month.

<span class="mw-page-title-main">Pebble (watch)</span> Discontinued smartwatch

Pebble is a discontinued smartwatch developed by Pebble Technology Corporation based in Palo Alto, California that shipped from 2013 to 2016. A brainchild of Eric Migicovsky, funding was conducted through a Kickstarter campaign in 2012. It was the most funded project in Kickstarter history at the time, raising $10.3 million. Pebble watches can be connected to Android and iOS devices to show notifications and messages. An online app store distributed Pebble-compatible apps from many developers including ESPN, Uber, Runkeeper, and GoPro.

<span class="mw-page-title-main">Skully (helmet)</span>

Skully was a brand of motorcycle helmet with a heads-up display and a rear-facing camera.

<span class="mw-page-title-main">Formlabs</span> American manufacturer of 3D printers

Formlabs is a 3D printing technology developer and manufacturer. The Somerville, Massachusetts-based company was founded in September 2011 by three MIT Media Lab students. The company develops and manufactures 3D printers and related software and consumables. It raised nearly $3 million in a Kickstarter campaign and created the Form 1, Form 1+, Form 2, Form Cell, Form 3, Form 3L, Fuse 1, Fuse 1+ and Form Auto stereolithography and selective laser sintering 3D printers and accessories.

Pretail is a sub-category of e-commerce and online retail for introducing new products, services, and brands to market by pre-launching online, from creating an interest waitlist of signups before launch to collecting reservations or pre-orders in limited quantity before release, realization, or commercial availability. Pretail allows new product ideas/prototypes to be mass produced only when they have reached an initial threshold of buy-in from investors/consumers. Pretail includes pre-sale commerce, pre-order retailers, pre-launch marketing services, incubation marketplaces, crowdfunding communities, and demand chain management systems.

<span class="mw-page-title-main">Chameleon (console)</span> Cancelled home video game console

The Retro Chameleon, originally called the Retro VGS then Coleco Chameleon prior to the loss of the Coleco Holdings license, is a cancelled home video game console. Its creators have stated that it was inspired by the second to fifth generations (1976–1999) of home video game consoles, and like most consoles of those generations, the Retro VGS had planned to run all of its games on individual cartridges, as opposed to optical discs and digital download. The Retro VGS was not expected to support any manner of online connectivity whatsoever, meaning all hardware and software released would have been the final product, and would not have the ability to update after release. A Kickstarter campaign was initially planned to raise funds for the project, but this was later moved to Indiegogo one week before the start of the campaign when a physical prototype was not produced.

<span class="mw-page-title-main">ZX Spectrum Vega+</span> Handheld video game console based on the ZX Spectrum home computer

The ZX Spectrum Vega+ is a handheld game console based on the ZX Spectrum and designed by Rick Dickinson as a follow-up to the ZX Spectrum Vega handheld TV game which was released in 2015. Only a small number of Vega+ machines were released, before Retro Computers was wound up.

<span class="mw-page-title-main">Neptune (company)</span> Canadian consumer electronics company

Neptune Computer Inc., commonly known as Neptune, is a Canadian privately held consumer electronics and wearable technology company, founded in 2013 by Simon Tian in Montreal, Quebec, and currently based in Toronto. The company has raised around $7 million from private investors, and over $2 million from crowdfunding sources like Kickstarter and Indiegogo.

Crowd Supply is a crowdfunding platform based in Portland, Oregon. The platform has claimed "over twice the success rate of Kickstarter and Indiegogo", and partners with creators who use it, providing mentorship resembling a business incubator.

<span class="mw-page-title-main">3D printing processes</span> List of 3D printing processes

A variety of processes, equipment, and materials are used in the production of a three-dimensional object via additive manufacturing. 3D printing is also known as additive manufacturing, because the numerous available 3D printing process tend to be additive in nature, with a few key differences in the technologies and the materials used in this process.

References

  1. ↑ "The Skarp Laser Razor: 21st Century Shaving (Suspended)". Kickstarter. Retrieved 12 May 2017.
  2. 1 2 3 Tan, Alicia Marie (29 September 2015). "Shaving will never be the same with this laser razor". Mashable. Retrieved 12 May 2017.
  3. ↑ "The Skarp bladeless razor has raised over $2 million on Kickstarter". Fortune. Retrieved 12 May 2017.
  4. ↑ "This futuristic razor shaves your hair with an actual laser — and it's already raised over $650,000". Business Insider. Retrieved 12 May 2017.
  5. 1 2 3 4 5 6 Vincent, James. (13 October 2015). "$4 million laser razor campaign banned from Kickstarter is already on Indiegogo", The Verge . Retrieved 11 September 2018.
  6. ↑ Hollister, Sean. (1 July 2016). "What happened to the Laser Razor?", CNET . Retrieved 11 September 2018.
  7. 1 2 Gustavsson, Morgan (19 May 2018). "The Skarp Laser Razor: 21st Century Shaving: Updates". Indiegogo. Retrieved 12 May 2017.
  8. 1 2 Limer, Eric. (15 October 2015). "The Skarp "Laser Razor" Is Going to Be Total Flaming Garbage", Popular Mechanics . Retrieved 20 September 2018.
  9. ↑ Williams, Lauren. (15 October 2018). "A laser razor? Irvine startup Skarp jumps to Indiegogo after getting kicked off Kickstarter, losing $4 million", Orange County Register . Retrieved 20 September 2018.
  10. 1 2 Rockman, Simon. (29 September 2015). "Find shaving a chore? Why not BLAST your BEARD off with a RAYGUN", The Register . Retrieved 20 September 2018.
  11. 1 2 3 Hollister, Sean. (23 November 2015). "We tried the laser razor so you don't have to", CNET. Retrieved 11 September 2018.
  12. ↑ Rundle, Michael. (13 October 2015). "'Non-existent' laser razor hits Indiegogo after Kickstarter boot", Wired . Retrieved 20 September 2018.
  13. ↑ Tucker, Emma. (14 October 2015). "Laser razor removed from Kickstarter after failure to show working prototype", Dezeen . Retrieved 20 September 2018.
  14. ↑ "The Skarp Laser Razor: 21st Century Shaving". Indiegogo. Retrieved 11 September 2018.
  15. 1 2 Hollister, Sean. (2 July 2016). "What happened to the Laser Razor?", CNET. Retrieved 11 September 2018.
  16. ↑ "Lars Ake Morgan Gustavsson, 8:23-bk-10312 - CourtListener.com". CourtListener. Retrieved 2023-10-17.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.