Skybaby | |
---|---|
Role | Ultralight aircraft |
National origin | United States |
Manufacturer | Skyhigh Ultralights Inc |
Introduction | 1983 |
Status | Production completed |
The Skyhigh Skybaby is an American ultralight aircraft that was designed and produced by Skyhigh Ultralights Inc, introduced in 1983. The aircraft was supplied in the form of plans for amateur construction. [1] [2]
The aircraft was designed to comply with the US FAR 103 Ultralight Vehicles rules, including the category's maximum empty weight of 254 lb (115 kg). The aircraft has a standard empty weight of 155 lb (70 kg). It features a cable-braced high-wing, a single-seat, open cockpit, conventional landing gear and a single engine in pusher configuration. [1] [2]
The aircraft is made from wood. The fuselage is built around a wooden torsion box that is foam-filled for stiffness. The tailboom is a 3 in (8 cm) diameter 6061-T6 aluminum tube. Its 32 ft (9.8 m) span wing is constructed from Douglas fir spars and wing ribs, covered with doped aircraft fabric. The wing features half-span ailerons and cable-bracing from a single kingpost. The pilot is accommodated in the open cockpit on a fixed seat. There is no windshield. The landing gear is bungee suspended and the tail wheel is steerable. [1] [2]
Being a plans-built aircraft a variety of engines have been installed, including the McCulloch MAC-101 powerplant of 12.5 hp (9 kW) and the Yamaha KT-100 go-cart engine of 15 hp (11 kW). [1] [2]
Data from Cliche and the Virtual Ultralight Museum [1] [2]
General characteristics
Performance
The Airborne Avenger is an American ultralight aircraft that was designed and produced by Airborne Wing Design in the early 1980s. The aircraft was supplied as a kit for amateur construction.
The Robertson B1-RD is an American ultralight aircraft that was designed by Glen Bashforth and Bruce Bashforth and produced by the Robertson Aircraft Corporation. The aircraft was supplied as a kit for amateur construction with production starting in June 1982.
The Worldwide Ultralite Clipper is an American ultralight aircraft that was designed and produced by Worldwide Ultralite Industries of Katy, Texas in the early 1980s. The aircraft was supplied as a kit for amateur construction.
The Seahawk Condor is an American ultralight aircraft that was designed by Buddy Head, Bob Carswell and Dave French and produced by Seahawk Industries and later by Condor Aircraft. The aircraft was supplied as a kit for amateur construction.
The Hovey Delta Bird is an American ultralight aircraft that was designed by Bob Hovey in 1982 and supplied as plans for amateur construction.
The Goldwing Ltd Goldwing is an American ultralight aircraft that was designed by Craig Catto and Brian Glenn and produced by Goldwing Ltd. The aircraft was supplied as a complete factory-built aircraft only and no kits or plans were offered.
The Advanced Aviation Husky, Hi-Nuski and Coyote are a family of American ultralight aircraft that was designed and produced by Advanced Aviation. The aircraft was supplied as a kit for amateur construction and introduced in 1978.
The Cascade Kasperwing I-80 is an American ultralight flying wing motorglider that was designed by Witold Kasper and Steve Grossruck. It was produced by Cascade Ultralites and introduced in 1976. The aircraft was supplied as a kit for amateur construction.
The Chandelle Mk IV is an American ultralight aircraft that was designed by Nile Downer and produced by Chandelle Aircraft. The aircraft was supplied as a kit for amateur construction.
The Golden Gate Mosquito is an American ultralight aircraft that was produced by Golden Gate Aviation. The aircraft was supplied as a kit for amateur construction.
The Rotec Panther is an American ultralight aircraft that was designed and produced by Rotec Engineering, introduced in 1984. The aircraft was supplied as a kit for amateur construction.
The Worldwide Skyraider S/S, also called the SkyRaider S/S, is an American ultralight aircraft that was designed and produced by Worldwide Ultralite Industries in the early 1980s. The aircraft was supplied as a kit for amateur construction.
The Bell Sidewinder is an American ultralight aircraft, supplied as a kit for amateur construction.
The Worldwide Ultralite Spitfire is an American ultralight aircraft that was designed by Fred Bell and manufactured by Worldwide Ultralite Industries and later by Don Ecker and Air Magic Ultralights of Houston, Texas. The aircraft was supplied as a kit for amateur construction.
The Ultra-Fab Sundowner, also called the Sundowner Convertible, is an American ultralight aircraft that was designed by Bob Leinen and produced by Ultra-Fab. The aircraft was supplied as a kit for amateur construction.
The Thor T/A is a Canadian ultralight aircraft that was designed by Thorsten B. Strenger and produced by Thor Air of Weston, Ontario. The aircraft was supplied as a kit for amateur construction.
The Pinaire Ultra-Aire is an American ultralight aircraft that was designed and produced by Pinaire Engineering. The aircraft was supplied as a kit for amateur construction.
The Greenwood Witch is an American ultralight aircraft that was designed and produced by Marvin Greenwood. The aircraft was supplied as a kit for amateur construction.
The Diehl AeroNautical XTC Hydrolight is an American amphibious flying boat ultralight aircraft that was designed and produced by Diehl AeroNautical in the 1980s.
The LEAF Trike is an American ultralight trike that was designed and produced by Leading Edge Air Foils in the 1980s. The aircraft was supplied as a kit for amateur construction.