SlipStream Genesis | |
---|---|
Slipstream Revelation | |
Role | Kit aircraft |
National origin | United States |
Manufacturer | SlipStream International |
Designer | Chuck Hamilton |
First flight | 1992 |
Introduction | 1992 |
Status | In production (2015) |
The SlipStream Genesis is a family of American, strut-braced, high wing, pusher configuration, tricycle gear aircraft, produced in kit form, for amateur construction. Designed by Chuck Hamilton, the series were originally produced by Innovation Engineering of Davenport, Iowa and more recently by SlipStream International of Wautoma, Wisconsin. [1] [2] [3] [4] [5] [6] [7] [8] [9] [10]
Developed in 1991 for the homebuilt aircraft market, the Genesis is built from aluminium tubing, riveted together using stainless steel gussets for support. The tail surfaces are suspended from a distinctive series of four tubes that curve to allow clearance for the pusher propeller. The wings and tail surfaces are covered with doped aircraft fabric or optionally with pre-sewn Dacron sailcloth envelopes. [1] [3] [4]
The series is unusual in having control yokes in place of the more common control sticks used on this class of aircraft. [1]
The Genesis can be fitted with floats or skis. Options include larger fuel capacity, electrically-operated flaperons and trim, wheel pants and ballistic parachute. [3]
Data from Cliche [1] and SlipStream [15]
General characteristics
Performance
Aircraft of comparable role, configuration, and era
The Aero Adventure Aventura is a family of ultralight amphibians marketed as a kit aircraft by Aero Adventure of DeLand, Florida. The aircraft was designed by Bob Bailey in 1995.
The Rans S-6 Coyote II is an American single-engined, tractor configuration, two-seat, high-wing monoplane designed by Randy Schlitter and manufactured by Rans Inc. The Coyote is available in kit form for amateur construction or as a completed light-sport aircraft.
The Freebird II is a family of American side-by-side two-seat, high wing, tricycle gear, pusher configuration single engined kit aircraft originally designed for construction by amateur builders by the Freebird Airplane Company of Marshville, North Carolina, and later Pro Sport Aviation of Wingate, North Carolina.
The Excalibur is an American two seats-in-tandem, high wing, pusher configuration ultralight aircraft that is manufactured in kit form for amateur construction, by Excalibur Aircraft of Sebring, Florida. It was introduced in 1993.
The Kolb Mark III is a family of American side-by-side two seater, high wing, strut-braced, pusher configuration, conventional landing gear-equipped ultralight aircraft that is produced in kit form by New Kolb Aircraft of London, Kentucky, and intended for amateur construction.
The Rans S-7 Courier is an American single-engined, tractor configuration, two-seats in tandem, high-wing monoplane designed by Randy Schlitter and manufactured by Rans Inc. The Courier is available in kit form for amateur construction or as a completed light-sport aircraft.
The Rans S-12 Airaile is a family of related American single-engined, pusher configuration, high-wing monoplanes designed by Randy Schlitter and manufactured by Rans Inc. The aircraft are available in kit form for amateur construction.
The RagWing RW22 Tiger Moth is a two-seats-in-tandem, biplane, conventional landing gear, single engine homebuilt aircraft designed by Roger Mann and sold as plans by RagWing Aircraft Designs for amateur construction.
The Flying K Sky Raider is a family of American, high wing, strut-braced, single engine, conventional landing gear ultralight aircraft that was designed by Ken Schrader and produced by Flying K Enterprises and later Sky Raider LLC of Caldwell, Idaho for amateur construction.
The Carlson Sparrow is a family of American, high wing, strut-braced, single engine, ultralight aircraft that was designed by Ernst W. Carlson and produced by Carlson Aircraft of East Palestine, Ohio and later Skyline Technologies of Salem, Ohio for amateur construction.
The Golden Circle Air T-Bird is a family of high-wing, strut-braced, pusher configuration ultralight aircraft that was produced by Teratorn Aircraft of Clear Lake, Iowa from 1983 to 1989 and then Golden Circle Air of De Soto, Iowa from 1989 until the mid-2000s. From 2011-2021 the aircraft were back in production by Indy Aircraft and from 2021 on by Tbird Aircraft. The aircraft is produced as a kit for amateur construction.
The Titan Tornado is large family of cantilever high-wing, pusher configuration, tricycle gear-equipped kit aircraft manufactured by Titan Aircraft of Austinburg, Ohio, for amateur construction.
The Precision Tech Fergy F-II B is a two-seat side-by-side, conventional landing gear, strut-braced, high-wing, pusher configuration ultralight aircraft that was manufactured by Ferguson Aircraft and later Precision Tech Aircraft in kit form for amateur construction. The aircraft is out of production and no longer available.
The US Light Aircraft Hornet is an American two-seats-in-tandem, pusher configuration, tricycle gear, strut-braced high wing ultralight aircraft, that was produced US Light Aircraft Corporation of Ramona, California between 1994 and circa 2008 in kit form for amateur construction. It was also available as a factory-completed light-sport aircraft.
The Quicksilver GT500 is a family of American strut-braced, high-wing, pusher configuration, tricycle gear aircraft built by Quicksilver Aeronautics of Temecula, California. The aircraft is available as a kit for amateur construction or as a completed ready-to-fly aircraft.
The M-Squared Breese is a large family of high-wing, strut-braced, pusher configuration, tricycle gear, ultralight aircraft produced by M-Squared Aircraft of St. Elmo, Alabama in kit form, for amateur construction.
The Raj Hamsa X-Air is an Indian, two-seat, high-wing, tricycle gear, tractor configuration, ultralight aircraft produced by Raj Hamsa Ultralights of Bangalore, Karnataka in kit form, for amateur construction.
The Rainbow Aerotrike is a family of South African two-seat ultralight trikes, made by Rainbow Aircraft of Edenvale, Gauteng and available in kit form for amateur construction or fully assembled. The type has been noted for its long-distance flights.
The Antares MA-32 is the first model in a large family of Ukrainian ultralight trikes that is designed and produced by Antares Aircraft and at one time marketed by Leading Edge Air Foils as the LEAF Antares. The aircraft are supplied as kits for amateur construction.
The Apex Eco 6 is the first of a family of Czech single and two seat flying wing ultralight trikes that were designed and produced by To-Mi Aviation and later by Apex Aviation. The aircraft were supplied as kits for amateur construction.