Smart transducer

Last updated
A smart transducer containing a transducer, processing unit and communication interface Smart transducer.gif
A smart transducer containing a transducer, processing unit and communication interface
Smart sensor overview Smart sensors.jpg
Smart sensor overview

A smart transducer is an analog or digital transducer, actuator, or sensor combined with a processing unit and a communication interface. [1]

Contents

As sensors and actuators become more complex, they provide support for various modes of operation and interfacing. Some applications require additionally fault-tolerant and distributed computing. Such functionality can be achieved by adding an embedded microcontroller to the classical sensor/actuator, which increases the ability to cope with complexity at a fair price. Typically, these on-board technologies in smart sensors are used for digital processing, either frequency-to-code or analog-to-digital conversations, interfacing functions and calculations. Interfacing functions include decision-making tools like self-adaption, self-diagnostics, and self-identification functions, but also the ability to control how long and when the sensor will be fully awake, to minimize power consumption and to decide when to dump and store data.

They are often made using CMOS, VLSI technology and may contain MEMS [2] devices leading to lower cost. They may provide full digital outputs for easier interface or they may provide quasi-digital outputs like pulse-width modulation. In the machine vision field, a single compact unit that combines the imaging functions and the complete image processing functions is often called a smart sensor.

Smart sensors are a crucial element in the phenomenon Internet of Things (IoT). Within such a network, multiple physical vehicles and devices are embedded with sensors, software and electronics. Data will be collected and shared for better integration between digital environments and the physical world. The connectivity between sensors is an important requirement for an IoT innovation to perform well. Interoperability can therefore be seen as an consequence of connectivity. The sensors work and complement each other. [3] [4]

Improvement over traditional sensors

The key features of smart sensors as part of the IoT that differentiate them from traditional sensors are: [5]

The traditional sensor collects information about an object or a situation and translates it into an electrical signal. It gives feedback of the physical environment, process, or substance in a measurable way, and signals or indicates when change in this environment occurs. Traditional sensors in a network of sensors can be divided in three parts: one, the sensors; two, a centralized interface where the data is collected and processed; and three, an infrastructure that connects the network, like plugs, sockets and wires. [6]

A network of smart sensors can be divided in two parts; (1) the sensors, and (2) a centralized interface. The fundamental difference with traditional sensors, is that the microprocessors embedded in the smart sensors already process the data. Therefore, less data has to be transmitted and the data can immediately be used and accessed on different devices. The switch to smart sensors entails that the tight coupling between transmission and processing technologies is removed. [7]

Digital traces

Within a digital environment, actions or activities leave a digital trace. Smart sensors measure these activities in the physical environment and translate this into a digital environment. Therefore, every step within the process becomes digitally traceable. Whenever a mistake is made somewhere in a production process, this can be tracked down using these digital traces. As a result, it will be easier to track down inefficiencies within a production process and simplify process innovations, because one can easier analyze what part of the production process is inefficient. [8] Due to the fact that all the information is digitized, the company is exposed to cyber attacks. To protect itself from these information breaches, ensuring a secure platform is crucial. [9]

Layered modular architecture of digital sensors

The term layered modular architecture is a combination between the modular architecture of the physical components of a product with the layered architecture of the digital system. [9] There is a contents layer, a service layer, a network layer ((1) logical transmission, (2) physical transport), and a device layer ((1) logical capability, (2) physical machinery). [9] Starting at the device layer, the smart sensor itself is the physical machinery, measuring its physical environment. The logical capacity refers to operating systems, which can be Windows, MacOS or another operating system that is used to run the platform on. At the network layer, the logical transmission can consist of various transmission methods; Wi-Fi, Bluetooth, NFC, Zigbee and RFID. For smart sensors, physical transport is not necessary, since smart sensors are usually wireless. Yet charging wires and sockets are still commonly used. The service layer is about the service that is provided by the smart sensor. The sensors are able to process the data themselves. Therefore, there is not one specific service of the sensors because they process multiple things simultaneously. They can for example signal that certain assets need to be repaired. The content layer would be the centralised platforms, that are created and used to gain insights and create value.

Usage across industries

Insurance

Traditionally, insurance companies tried to assess the risk of their clients by looking over their application form, trust their answers and then simply cover it with a monthly premium. However, due to asymmetric information, it was difficult to accurately determine risk of a certain client. The introduction of smart sensors in the insurance industry is disrupting the traditional practice in multiple ways. Smart sensors generate a large amount of (big) data and affects the business models of insurance companies as follows.

Smart sensors in client’s homes or in wearables help insurance companies to get much more detailed information. Wearables can for example monitor heart-related metrics, location-based systems like security technologies, or smart thermostats can generate important data of your house. They can use this information to improve risk assessment and risk management, reduce asymmetric information, and ultimately reduce costs.

Additionally, if clients agree upon providing this data of sensors in their homes, they can even get a discount on their premium. This approach of trading information in return for special deals is called bartering and it is one form of data monetization. [10] Data monetization is the act of exchanging information-based products and services for legal tender or something of perceived equivalent value. [11] In other words, data monetization is exploiting opportunities to generate new revenues. Another form of data monetization, which insurers regularly use nowadays, is selling data to third parties.

Manufacturing

One of the recent trends in manufacturing is the revolution of Industry 4.0, in which data exchanging and automation play a crucial role. Traditionally, machines were already able to automate certain small tasks (e.g. open/close valves). Automation in smart factories go beyond these easy tasks. It increasingly includes complex optimization decisions that humans typically make. [12] For machines to be able to make human decisions, it is imperative to get detailed information, and that’s were smart sensors come in.

For manufacturing, efficiency is one of the most important aspects. Smart sensors pull data from assets to which they are connected and process the data continuously. They can provide detailed real-time information about the plant and process and reveal performance issues. If this is just a small performance issue, the smart factory can even solve the problem itself. Smart sensors can predict defects as well, so rather than fixing a problem afterwards, maintenance workers can prevent it. This all leads to outstanding asset efficiency and reduces downtime, which is the enemy of every production process.

Smart sensors can also be applied beyond the factory. For example sensors on objects like vehicles or shipping containers can give detailed information about delivery status. This affects both manufacturing and the whole supply chain.

Automotive

The last couple of years, the automotive industry has been challenging their ‘old’ ecosystems. Several new technologies like smart sensors play a crucial role in this process. Nowadays, these sensors only enable some small autonomous features like automatic parking services, obstacle detection and emergency braking, which improves security. Although a lot of companies are focused on technologies that improve cars and work towards automation, complete disruption of the industry has not yet been reached. Yet, experts expect that autonomous cars without any human interference will dominate the roads in 10 years.

Smart sensors generate data of the car and their surroundings, connect them into a car network, and translate this into valuable information which allows the car to see and interpret the world. Basically, the sensor works as follows. It has to pull physical and environmental data, use that information for calculations, analyze the outcomes and translate it into action. Sensors in other cars have to be connected into the car network and communicate with each other.

However, smart sensors in the automotive industry can also be used in a more sustaining way. Car manufacturers place smart sensors in different parts of the car, which collects and shares information. Drivers and manufacturers can use this information to transform from scheduled to predictive maintenance. Established firms have a strong focus on these sustaining innovations, but the risk is that they do not see new entrants coming and have difficulties to adapt. [13] Therefore, making a distinction between a disruptive and sustaining innovation is important and brings different implications to managers.

See also

Related Research Articles

<span class="mw-page-title-main">Data acquisition</span> Process of sampling signals from sensors and converting into digital data

Data acquisition is the process of sampling signals that measure real-world physical conditions and converting the resulting samples into digital numeric values that can be manipulated by a computer. Data acquisition systems, abbreviated by the acronyms DAS,DAQ, or DAU, typically convert analog waveforms into digital values for processing. The components of data acquisition systems include:

<span class="mw-page-title-main">Home automation</span> Building automation for a home

Home automation or domotics is building automation for a home. A home automation system will monitor and/or control home attributes such as lighting, climate, entertainment systems, and appliances. It may also include home security such as access control and alarm systems.

Zigbee is an IEEE 802.15.4-based specification for a suite of high-level communication protocols used to create personal area networks with small, low-power digital radios, such as for home automation, medical device data collection, and other low-power low-bandwidth needs, designed for small scale projects which need wireless connection. Hence, Zigbee is a low-power, low-data-rate, and close proximity wireless ad hoc network.

Wireless sensor networks (WSNs) refer to networks of spatially dispersed and dedicated sensors that monitor and record the physical conditions of the environment and forward the collected data to a central location. WSNs can measure environmental conditions such as temperature, sound, pollution levels, humidity and wind.

Building automation (BAS), also known as building management system (BMS) or building energy management system (BEMS), is the automatic centralized control of a building's HVAC, electrical, lighting, shading, access control, security systems, and other interrelated systems. Some objectives of building automation are improved occupant comfort, efficient operation of building systems, reduction in energy consumption, reduced operating and maintaining costs and increased security.

In computer networking, linear network coding is a program in which intermediate nodes transmit data from source nodes to sink nodes by means of linear combinations.

<span class="mw-page-title-main">Edge computing</span> Distributed computing paradigm

Edge computing is a distributed computing model that brings computation and data storage closer to the sources of data. More broadly, it refers to any design that pushes computation physically closer to a user, so as to reduce the latency compared to when an application runs on a centralized data centre.

The Internet of things (IoT) describes devices with sensors, processing ability, software and other technologies that connect and exchange data with other devices and systems over the Internet or other communications networks. The Internet of things encompasses electronics, communication, and computer science engineering. "Internet of things" has been considered a misnomer because devices do not need to be connected to the public internet; they only need to be connected to a network and be individually addressable.

<span class="mw-page-title-main">Smart city</span> City using integrated information and communication technology

A smart city is a technologically modern urban area that uses different types of electronic methods and sensors to collect specific data. Information gained from that data is used to manage assets, resources and services efficiently; in return, that data is used to improve operations across the city. This includes data collected from citizens, devices, buildings and assets that is processed and analyzed to monitor and manage traffic and transportation systems, power plants, utilities, urban forestry, water supply networks, waste disposal, criminal investigations, information systems, schools, libraries, hospitals, and other community services. Smart cities are defined to be smart both in the ways in which their local governments harness technology as well as in how they monitor, analyze, plan, and govern the city. In smart cities, the sharing of data is not limited to the city itself but also includes businesses, citizens and other third parties that can benefit from various uses of that data. Sharing data from different systems and sectors creates opportunities for increased understanding and economic benefits.

A smart object is an object that enhances the interaction with not only people but also with other smart objects. Also known as smart connected products or smart connected things (SCoT), they are products, assets and other things embedded with processors, sensors, software and connectivity that allow data to be exchanged between the product and its environment, manufacturer, operator/user, and other products and systems. Connectivity also enables some capabilities of the product to exist outside the physical device, in what is known as the product cloud. The data collected from these products can be then analyzed to inform decision-making, enable operational efficiencies and continuously improve the performance of the product.

Cyber-Physical Systems (CPS) are integrations of computation with physical processes. In cyber-physical systems, physical and software components are deeply intertwined, able to operate on different spatial and temporal scales, exhibit multiple and distinct behavioral modalities, and interact with each other in ways that change with context. CPS involves transdisciplinary approaches, merging theory of cybernetics, mechatronics, design and process science. The process control is often referred to as embedded systems. In embedded systems, the emphasis tends to be more on the computational elements, and less on an intense link between the computational and physical elements. CPS is also similar to the Internet of Things (IoT), sharing the same basic architecture; nevertheless, CPS presents a higher combination and coordination between physical and computational elements.

IEEE 1451 is a set of smart transducer interface standards developed by the Institute of Electrical and Electronics Engineers (IEEE) Instrumentation and Measurement Society's Sensor Technology Technical Committee describing a set of open, common, network-independent communication interfaces for connecting transducers to microprocessors, instrumentation systems, and control/field networks. One of the key elements of these standards is the definition of Transducer electronic data sheets (TEDS) for each transducer. The TEDS is a memory device attached to the transducer, which stores transducer identification, calibration, correction data, and manufacturer-related information. The goal of the IEEE 1451 family of standards is to allow the access of transducer data through a common set of interfaces whether the transducers are connected to systems or networks via a wired or wireless means.

<span class="mw-page-title-main">Fourth Industrial Revolution</span> Current trend of manufacturing technology

"Fourth Industrial Revolution", "4IR", or "Industry 4.0" is a buzzword and neologism describing rapid technological advancement in the 21st century. The term was popularised in 2016 by Klaus Schwab, the World Economic Forum founder and executive chairman, who says that the changes show a significant shift in industrial capitalism.

Fog computing or fog networking, also known as fogging, is an architecture that uses edge devices to carry out a substantial amount of computation, storage, and communication locally and routed over the Internet backbone.

Multi-access edge computing (MEC), formerly mobile edge computing, is an ETSI-defined network architecture concept that enables cloud computing capabilities and an IT service environment at the edge of the cellular network and, more in general at the edge of any network. The basic idea behind MEC is that by running applications and performing related processing tasks closer to the cellular customer, network congestion is reduced and applications perform better. MEC technology is designed to be implemented at the cellular base stations or other edge nodes, and enables flexible and rapid deployment of new applications and services for customers. Combining elements of information technology and telecommunications networking, MEC also allows cellular operators to open their radio access network (RAN) to authorized third parties, such as application developers and content providers.

A digital twin is a digital model of an intended or actual real-world physical product, system, or process that serves as the effectively indistinguishable digital counterpart of it for practical purposes, such as simulation, integration, testing, monitoring, and maintenance.

The industrial internet of things (IIoT) refers to interconnected sensors, instruments, and other devices networked together with computers' industrial applications, including manufacturing and energy management. This connectivity allows for data collection, exchange, and analysis, potentially facilitating improvements in productivity and efficiency as well as other economic benefits. The IIoT is an evolution of a distributed control system (DCS) that allows for a higher degree of automation by using cloud computing to refine and optimize the process controls.

The Internet of Military Things (IoMT) is a class of Internet of things for combat operations and warfare. It is a complex network of interconnected entities, or "things", in the military domain that continually communicate with each other to coordinate, learn, and interact with the physical environment to accomplish a broad range of activities in a more efficient and informed manner. The concept of IoMT is largely driven by the idea that future military battles will be dominated by machine intelligence and cyber warfare and will likely take place in urban environments. By creating a miniature ecosystem of smart technology capable of distilling sensory information and autonomously governing multiple tasks at once, the IoMT is conceptually designed to offload much of the physical and mental burden that warfighters encounter in a combat setting.

<span class="mw-page-title-main">IoT forensics</span> Branch of digital forensics

IoT forensics is a branch of digital forensics that has the goal of identifying and extracting digital information from devices belonging to the Internet of things field, using a forensically sound and legally acceptable process.

The Internet of Musical Things is a research area that aims to bring Internet of Things connectivity to musical and artistic practices. Moreover, it encompasses concepts coming from music computing, ubiquitous music, human-computer interaction, artificial intelligence, augmented reality, virtual reality, gaming, participative art, and new interfaces for musical expression. From a computational perspective, IoMusT refers to local or remote networks embedded with devices capable of generating and/or playing musical content.

References

  1. ↑ Elmenreich, W. (2006). "Time-triggered smart transducer networks" (PDF). IEEE Transactions on Industrial Informatics. 2 (3): 192–199. arXiv: 1507.04394 . doi:10.1109/TII.2006.873991. S2CID   11764613.
  2. ↑ Sheu, Meng-Lieh; Hsu, Wei-Hung; Tsao, Lin-Jie (2012). "A Capacitance-Ratio-Modulated Current Front-End Circuit with Pulsewidth Modulation Output for a Capacitive Sensor Interface". IEEE Transactions on Instrumentation and Measurement. 61 (2): 447–455. Bibcode:2012ITIM...61..447S. doi:10.1109/TIM.2011.2161929. S2CID   25171486.
  3. ↑ Sundmaeker, Harald; Guillemin, Patrick; Friess, Peter (2010). Vision and challenges for realising the Internet of Things. Luxembourg: Publications Office of the European Union. ISBN   9789279150883. OCLC   781160155.
  4. ↑ Bishnu, Abhijeet; Bhatia, Vimal (2018). "Receiver for IEEE 802.11ah in Interference Limited Environments". IEEE Internet of Things Journal. 5 (5): 4109–4118. doi:10.1109/jiot.2018.2867908. ISSN   2327-4662. S2CID   53434450.
  5. ↑ "Smart Sensors - Technologie für das IoT". ADUK GmbH (in German). 2022-01-31. Retrieved 2022-02-23.
  6. ↑ Spencer, B. F.; Ruiz-Sandoval, Manuel E.; Kurata, Narito (2004). "Smart sensing technology: opportunities and challenges". Structural Control and Health Monitoring. 11 (4): 349–368. doi:10.1002/stc.48. ISSN   1545-2255. S2CID   7428936.
  7. ↑ Deloitte. (2018). Using smart sensors to drive supply chain innovation [Ebook]
  8. ↑ Kelly, Sean Dieter Tebje; Suryadevara, Nagender Kumar; Mukhopadhyay, Subhas Chandra (October 2013). "Towards the Implementation of IoT for Environmental Condition Monitoring in Homes". IEEE Sensors Journal. 13 (10): 3846–3853. Bibcode:2013ISenJ..13.3846K. doi:10.1109/jsen.2013.2263379. ISSN   1530-437X. S2CID   15230040.
  9. 1 2 3 Yoo, Youngjin; Henfridsson, Ola; Lyytinen, Kalle (December 2010). "Research Commentary—The New Organizing Logic of Digital Innovation: An Agenda for Information Systems Research". Information Systems Research. 21 (4): 724–735. doi:10.1287/isre.1100.0322. ISSN   1047-7047.
  10. ↑ Woerner, Stephanie L; Wixom, Barbara H (2015-01-20). "Big data: extending the business strategy toolbox". Journal of Information Technology. 30 (1): 60–62. doi:10.1057/jit.2014.31. ISSN   0268-3962. S2CID   205123873.
  11. ↑ Wixom, B.H. (2014). Cashing in on your Data. Center for Information Systems Research, Sloan School of Management, Cambridge, MA: Massachusetts
  12. ↑ Burke, R., Mussomeli, A., Laaper, S., Hartigan, M., and Sniderman, B (2017). The smart factory, Deloitte University Press
  13. ↑ Klenner, Philipp; Hüsig, Stefan; Dowling, Michael (May 2013). "Ex-ante evaluation of disruptive susceptibility in established value networks—When are markets ready for disruptive innovations?". Research Policy. 42 (4): 914–927. doi:10.1016/j.respol.2012.12.006. ISSN   0048-7333. S2CID   153857396.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.