Smooth infinitesimal analysis

Last updated

Smooth infinitesimal analysis is a modern reformulation of the calculus in terms of infinitesimals. Based on the ideas of F. W. Lawvere and employing the methods of category theory, it views all functions as being continuous and incapable of being expressed in terms of discrete entities. As a theory, it is a subset of synthetic differential geometry. Terence Tao has referred to this concept under the name "cheap nonstandard analysis." [1]

Contents

The nilsquare or nilpotent infinitesimals are numbers ε where ε² = 0 is true, but ε = 0 need not be true at the same time. Calculus Made Easy notably uses nilpotent infinitesimals.

Overview

This approach departs from the classical logic used in conventional mathematics by denying the law of the excluded middle, e.g., NOT (a ≠ b) does not imply a = b. In particular, in a theory of smooth infinitesimal analysis one can prove for all infinitesimals ε, NOT (ε ≠ 0); yet it is provably false that all infinitesimals are equal to zero. [2] One can see that the law of excluded middle cannot hold from the following basic theorem (again, understood in the context of a theory of smooth infinitesimal analysis):

Every function whose domain isR, the real numbers, is continuous and infinitely differentiable.

Despite this fact, one could attempt to define a discontinuous function f(x) by specifying that f(x) = 1 for x = 0, and f(x) = 0 for x ≠ 0. If the law of the excluded middle held, then this would be a fully defined, discontinuous function. However, there are plenty of x, namely the infinitesimals, such that neither x = 0 nor x ≠ 0 holds, so the function is not defined on the real numbers.

In typical models of smooth infinitesimal analysis, the infinitesimals are not invertible, and therefore the theory does not contain infinite numbers. However, there are also models that include invertible infinitesimals.

Other mathematical systems exist which include infinitesimals, including nonstandard analysis and the surreal numbers. Smooth infinitesimal analysis is like nonstandard analysis in that (1) it is meant to serve as a foundation for analysis, and (2) the infinitesimal quantities do not have concrete sizes (as opposed to the surreals, in which a typical infinitesimal is 1/ω, where ω is a von Neumann ordinal). However, smooth infinitesimal analysis differs from nonstandard analysis in its use of nonclassical logic, and in lacking the transfer principle. Some theorems of standard and nonstandard analysis are false in smooth infinitesimal analysis, including the intermediate value theorem and the Banach–Tarski paradox. Statements in nonstandard analysis can be translated into statements about limits, but the same is not always true in smooth infinitesimal analysis.

Intuitively, smooth infinitesimal analysis can be interpreted as describing a world in which lines are made out of infinitesimally small segments, not out of points. These segments can be thought of as being long enough to have a definite direction, but not long enough to be curved. The construction of discontinuous functions fails because a function is identified with a curve, and the curve cannot be constructed pointwise. We can imagine the intermediate value theorem's failure as resulting from the ability of an infinitesimal segment to straddle a line. Similarly, the Banach–Tarski paradox fails because a volume cannot be taken apart into points.

See also

Related Research Articles

Calculus is the mathematical study of continuous change, in the same way that geometry is the study of shape, and algebra is the study of generalizations of arithmetic operations.

In mathematics, a continuous function is a function such that a small variation of the argument induces a small variation of the value of the function. This implies there are no abrupt changes in value, known as discontinuities. More precisely, a function is continuous if arbitrarily small changes in its value can be assured by restricting to sufficiently small changes of its argument. A discontinuous function is a function that is not continuous. Until the 19th century, mathematicians largely relied on intuitive notions of continuity and considered only continuous functions. The epsilon–delta definition of a limit was introduced to formalize the definition of continuity.

<span class="mw-page-title-main">Nonstandard analysis</span> Calculus using a logically rigorous notion of infinitesimal numbers

The history of calculus is fraught with philosophical debates about the meaning and logical validity of fluxions or infinitesimal numbers. The standard way to resolve these debates is to define the operations of calculus using limits rather than infinitesimals. Nonstandard analysis instead reformulates the calculus using a logically rigorous notion of infinitesimal numbers.

In mathematics, the branch of real analysis studies the behavior of real numbers, sequences and series of real numbers, and real functions. Some particular properties of real-valued sequences and functions that real analysis studies include convergence, limits, continuity, smoothness, differentiability and integrability.

<span class="mw-page-title-main">Hyperreal number</span> Element of a nonstandard model of the reals, which can be infinite or infinitesimal

In mathematics, hyperreal numbers are an extension of the real numbers to include certain classes of infinite and infinitesimal numbers. A hyperreal number is said to be finite if, and only if, for some integer . is said to be infinitesimal if, and only if, for all positive integers . The term "hyper-real" was introduced by Edwin Hewitt in 1948.

<span class="mw-page-title-main">Surreal number</span> Generalization of the real numbers

In mathematics, the surreal number system is a totally ordered proper class containing not only the real numbers but also infinite and infinitesimal numbers, respectively larger or smaller in absolute value than any positive real number. Research on the Go endgame by John Horton Conway led to the original definition and construction of surreal numbers. Conway's construction was introduced in Donald Knuth's 1974 book Surreal Numbers: How Two Ex-Students Turned On to Pure Mathematics and Found Total Happiness.

In mathematical logic, the compactness theorem states that a set of first-order sentences has a model if and only if every finite subset of it has a model. This theorem is an important tool in model theory, as it provides a useful method for constructing models of any set of sentences that is finitely consistent.

<span class="mw-page-title-main">Infinitesimal</span> Extremely small quantity in calculus; thing so small that there is no way to measure it

In mathematics, an infinitesimal number is a non-zero quantity that is closer to 0 than any non-zero real number is. The word infinitesimal comes from a 17th-century Modern Latin coinage infinitesimus, which originally referred to the "infinity-eth" item in a sequence.

In model theory, a transfer principle states that all statements of some language that are true for some structure are true for another structure. One of the first examples was the Lefschetz principle, which states that any sentence in the first-order language of fields that is true for the complex numbers is also true for any algebraically closed field of characteristic 0.

In mathematics, nonstandard calculus is the modern application of infinitesimals, in the sense of nonstandard analysis, to infinitesimal calculus. It provides a rigorous justification for some arguments in calculus that were previously considered merely heuristic.

In mathematics, differential refers to several related notions derived from the early days of calculus, put on a rigorous footing, such as infinitesimal differences and the derivatives of functions.

In mathematics, deformation theory is the study of infinitesimal conditions associated with varying a solution P of a problem to slightly different solutions Pε, where ε is a small number, or a vector of small quantities. The infinitesimal conditions are the result of applying the approach of differential calculus to solving a problem with constraints. The name is an analogy to non-rigid structures that deform slightly to accommodate external forces.

In functional analysis, a branch of mathematics, the Borel functional calculus is a functional calculus, which has particularly broad scope. Thus for instance if T is an operator, applying the squaring function s → s2 to T yields the operator T2. Using the functional calculus for larger classes of functions, we can for example define rigorously the "square root" of the (negative) Laplacian operator −Δ or the exponential

In mathematics, a fixed-point theorem is a result saying that a function F will have at least one fixed point (a point x for which F(x) = x), under some conditions on F that can be stated in general terms.

In the mathematical field of analysis, the Nash–Moser theorem, discovered by mathematician John Forbes Nash and named for him and Jürgen Moser, is a generalization of the inverse function theorem on Banach spaces to settings when the required solution mapping for the linearized problem is not bounded.

In nonstandard analysis, a field of mathematics, the increment theorem states the following: Suppose a function y = f(x) is differentiable at x and that Δx is infinitesimal. Then for some infinitesimal ε, where

<i>Elementary Calculus: An Infinitesimal Approach</i>

Elementary Calculus: An Infinitesimal approach is a textbook by H. Jerome Keisler. The subtitle alludes to the infinitesimal numbers of the hyperreal number system of Abraham Robinson and is sometimes given as An approach using infinitesimals. The book is available freely online and is currently published by Dover.

In calculus, the differential represents the principal part of the change in a function with respect to changes in the independent variable. The differential is defined by where is the derivative of f with respect to , and is an additional real variable. The notation is such that the equation

<span class="mw-page-title-main">Uniform limit theorem</span>

In mathematics, the uniform limit theorem states that the uniform limit of any sequence of continuous functions is continuous.

References

  1. ↑ Tao, Terrence (2012-04-03). "A cheap version of nonstandard analysis". What's new. Retrieved 2023-12-15.
  2. ↑ Bell, John L. (2008). A Primer of Infinitesimal Analysis, 2nd Edition. Cambridge University Press. ISBN   9780521887182.

Further reading

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.