Spatial frequency

Last updated
160 by 160 thumbnail of 'Green Sea Shell'.png
Green Sea Shell image
160 by 160 thumbnail of 'Green Sea Shell' - 0. in fourier domain all components (RGB).png
Spatial frequency representation of the Green Sea Shell image
Image and its spatial frequencies: Magnitude of frequency domain is logarithmically scaled, and zero frequency is in the center. Notable is the clustering of the content on the lower frequencies, a typical property of natural images.

In mathematics, physics, and engineering, spatial frequency is a characteristic of any structure that is periodic across position in space. The spatial frequency is a measure of how often sinusoidal components (as determined by the Fourier transform) of the structure repeat per unit of distance.

Contents

The SI unit of spatial frequency is the reciprocal metre (m−1), [1] although cycles per meter (c/m) is also common. In image-processing applications, spatial frequency is often expressed in units of cycles per millimeter (c/mm) or also line pairs per millimeter (LP/mm).

In wave propagation, the spatial frequency is also known as wavenumber . Ordinary wavenumber is defined as the reciprocal of wavelength and is commonly denoted by [2] or sometimes : [3]

Angular wavenumber , expressed in radian per metre (rad/m), is related to ordinary wavenumber and wavelength by

Visual perception

In the study of visual perception, sinusoidal gratings are frequently used to probe the capabilities of the visual system, such as contrast sensitivity. In these stimuli, spatial frequency is expressed as the number of cycles per degree of visual angle. Sine-wave gratings also differ from one another in amplitude (the magnitude of difference in intensity between light and dark stripes), orientation, and phase.

Spatial-frequency theory

The spatial-frequency theory refers to the theory that the visual cortex operates on a code of spatial frequency, not on the code of straight edges and lines hypothesised by Hubel and Wiesel on the basis of early experiments on V1 neurons in the cat. [4] [5] In support of this theory is the experimental observation that the visual cortex neurons respond even more robustly to sine-wave gratings that are placed at specific angles in their receptive fields than they do to edges or bars. Most neurons in the primary visual cortex respond best when a sine-wave grating of a particular frequency is presented at a particular angle in a particular location in the visual field. [6] (However, as noted by Teller (1984), [7] it is probably not wise to treat the highest firing rate of a particular neuron as having a special significance with respect to its role in the perception of a particular stimulus, given that the neural code is known to be linked to relative firing rates. For example, in color coding by the three cones in the human retina, there is no special significance to the cone that is firing most strongly – what matters is the relative rate of firing of all three simultaneously. Teller (1984) similarly noted that a strong firing rate in response to a particular stimulus should not be interpreted as indicating that the neuron is somehow specialized for that stimulus, since there is an unlimited equivalence class of stimuli capable of producing similar firing rates.)

The spatial-frequency theory of vision is based on two physical principles:

  1. Any visual stimulus can be represented by plotting the intensity of the light along lines running through it.
  2. Any curve can be broken down into constituent sine waves by Fourier analysis.

The theory (for which empirical support has yet to be developed) states that in each functional module of the visual cortex, Fourier analysis (or its piecewise form [8] ) is performed on the receptive field and the neurons in each module are thought to respond selectively to various orientations and frequencies of sine wave gratings. [9] When all of the visual cortex neurons that are influenced by a specific scene respond together, the perception of the scene is created by the summation of the various sine-wave gratings. (This procedure, however, does not address the problem of the organization of the products of the summation into figures, grounds, and so on. It effectively recovers the original (pre-Fourier analysis) distribution of photon intensity and wavelengths across the retinal projection, but does not add information to this original distribution. So the functional value of such a hypothesized procedure is unclear. Some other objections to the "Fourier theory" are discussed by Westheimer (2001) [10] ). One is generally not aware of the individual spatial frequency components since all of the elements are essentially blended together into one smooth representation. However, computer-based filtering procedures can be used to deconstruct an image into its individual spatial frequency components. [11] Research on spatial frequency detection by visual neurons complements and extends previous research using straight edges rather than refuting it. [12]

Further research shows that different spatial frequencies convey different information about the appearance of a stimulus. High spatial frequencies represent abrupt spatial changes in the image, such as edges, and generally correspond to featural information and fine detail. M. Bar (2004) has proposed that low spatial frequencies represent global information about the shape, such as general orientation and proportions. [13] Rapid and specialised perception of faces is known to rely more on low spatial frequency information. [14] In the general population of adults, the threshold for spatial frequency discrimination is about 7%. It is often poorer in dyslexic individuals. [15]

Spatial frequency in MRI

When spatial frequency is used as a variable in a mathematical function, the function is said to be in k-space. Two dimensional k-space has been introduced into MRI as a raw data storage space. The value of each data point in k-space is measured in the unit of 1/meter, i.e. the unit of spatial frequency.

It is very common that the raw data in k-space shows features of periodic functions. The periodicity is not spatial frequency, but is temporal frequency. An MRI raw data matrix is composed of a series of phase-variable spin-echo signals. Each of the spin-echo signal is a sinc function of time, which can be described by

Where

Here is the gyromagnetic ratio constant, and is the basic resonance frequency of the spin. Due to the presence of the gradient G, the spatial information r is encoded onto the frequency . The periodicity seen in the MRI raw data is just this frequency , which is basically the temporal frequency in nature.

In a rotating frame, , and is simplified to . Just by letting , the spin-echo signal is expressed in an alternative form

Now, the spin-echo signal is in the k-space. It becomes a periodic function of k with r as the k-space frequency but not as the "spatial frequency", since "spatial frequency" is reserved for the name of the periodicity seen in the real space r.

The k-space domain and the space domain form a Fourier pair. Two pieces of information are found in each domain, the spatial information and the spatial frequency information. The spatial information, which is of great interest to all medical doctors, is seen as periodic functions in the k-space domain and is seen as the image in the space domain. The spatial frequency information, which might be of interest to some MRI engineers, is not easily seen in the space domain but is readily seen as the data points in the k-space domain.

See also

Related Research Articles

<span class="mw-page-title-main">Frequency</span> Number of occurrences or cycles per unit time

Frequency, most often measured in hertz, is the number of occurrences of a repeating event per unit of time. It is also occasionally referred to as temporal frequency for clarity and to distinguish it from spatial frequency. Ordinary frequency is related to angular frequency by a factor of 2π. The period is the interval of time between events, so the period is the reciprocal of the frequency: f = 1/T.

<span class="mw-page-title-main">Wavelength</span> Distance over which a waves shape repeats

In physics and mathematics, wavelength or spatial period of a wave or periodic function is the distance over which the wave's shape repeats. In other words, it is the distance between consecutive corresponding points of the same phase on the wave, such as two adjacent crests, troughs, or zero crossings. Wavelength is a characteristic of both traveling waves and standing waves, as well as other spatial wave patterns. The inverse of the wavelength is called the spatial frequency. Wavelength is commonly designated by the Greek letter lambda (λ). The term "wavelength" is also sometimes applied to modulated waves, and to the sinusoidal envelopes of modulated waves or waves formed by interference of several sinusoids.

<span class="mw-page-title-main">Wave</span> Repeated oscillation around equilibrium

In physics, mathematics, engineering, and related fields, a wave is a propagating dynamic disturbance of one or more quantities. Periodic waves oscillate repeatedly about an equilibrium (resting) value at some frequency. When the entire waveform moves in one direction, it is said to be a traveling wave; by contrast, a pair of superimposed periodic waves traveling in opposite directions makes a standing wave. In a standing wave, the amplitude of vibration has nulls at some positions where the wave amplitude appears smaller or even zero. Waves are often described by a wave equation or a one-way wave equation for single wave propagation in a defined direction.

<span class="mw-page-title-main">Cutoff frequency</span> Frequency response boundary

In physics and electrical engineering, a cutoff frequency, corner frequency, or break frequency is a boundary in a system's frequency response at which energy flowing through the system begins to be reduced rather than passing through.

In physics, a phonon is a collective excitation in a periodic, elastic arrangement of atoms or molecules in condensed matter, specifically in solids and some liquids. A type of quasiparticle, a phonon is an excited state in the quantum mechanical quantization of the modes of vibrations for elastic structures of interacting particles. Phonons can be thought of as quantized sound waves, similar to photons as quantized light waves. However, photons are fundamental particles that can be individually detected, whereas phonons, being quasiparticles, are an emergent phenomenon.

<span class="mw-page-title-main">Wavenumber</span> Spatial frequency of a wave

In the physical sciences, the wavenumber, also known as repetency, is the spatial frequency of a wave, measured in cycles per unit distance or radians per unit distance. It is analogous to temporal frequency, which is defined as the number of wave cycles per unit time or radians per unit time.

Fourier optics is the study of classical optics using Fourier transforms (FTs), in which the waveform being considered is regarded as made up of a combination, or superposition, of plane waves. It has some parallels to the Huygens–Fresnel principle, in which the wavefront is regarded as being made up of a combination of spherical wavefronts whose sum is the wavefront being studied. A key difference is that Fourier optics considers the plane waves to be natural modes of the propagation medium, as opposed to Huygens–Fresnel, where the spherical waves originate in the physical medium.

<span class="mw-page-title-main">Sine wave</span> Wave shaped like the sine function

A sine wave, sinusoidal wave, or sinusoid is a periodic wave whose waveform (shape) is the trigonometric sine function. In mechanics, as a linear motion over time, this is simple harmonic motion; as rotation, it corresponds to uniform circular motion. Sine waves occur often in physics, including wind waves, sound waves, and light waves, such as monochromatic radiation. In engineering, signal processing, and mathematics, Fourier analysis decomposes general functions into a sum of sine waves of various frequencies, relative phases, and magnitudes.

<span class="mw-page-title-main">Reciprocal lattice</span> Fourier transform of a real-space lattice, important in solid-state physics

In physics, the reciprocal lattice emerges from the Fourier transform of another lattice. The direct lattice or real lattice is a periodic function in physical space, such as a crystal system. The reciprocal lattice exists in the mathematical space of spatial frequencies, known as reciprocal space or k space, where refers to the wavevector.

In physics, a wave vector is a vector used in describing a wave, with a typical unit being cycle per metre. It has a magnitude and direction. Its magnitude is the wavenumber of the wave, and its direction is perpendicular to the wavefront. In isotropic media, this is also the direction of wave propagation.

Plasma oscillations, also known as Langmuir waves, are rapid oscillations of the electron density in conducting media such as plasmas or metals in the ultraviolet region. The oscillations can be described as an instability in the dielectric function of a free electron gas. The frequency depends only weakly on the wavelength of the oscillation. The quasiparticle resulting from the quantization of these oscillations is the plasmon.

The electromagnetic wave equation is a second-order partial differential equation that describes the propagation of electromagnetic waves through a medium or in a vacuum. It is a three-dimensional form of the wave equation. The homogeneous form of the equation, written in terms of either the electric field E or the magnetic field B, takes the form:

<span class="mw-page-title-main">Contrast (vision)</span> Difference in luminance and/or color that makes objects visually distinguishable

Contrast is the difference in luminance or colour that makes an object visible on a background of different luminance or color. The human visual system is more sensitive to contrast than to absolute luminance; we can perceive the world similarly regardless of the huge changes in illumination over the day or from place to place. The maximum contrast of an image is the contrast ratio or dynamic range. Images with a contrast ratio close to their medium's maximum possible contrast ratio experience a conservation of contrast, wherein any increase in contrast in some parts of the image must necessarily result in a decrease in contrast elsewhere. Brightening an image will increase contrast in dark areas but decrease contrast in bright areas, while darkening the image will have the opposite effect. Bleach bypass destroys contrast in both the darkest and brightest parts of an image while enhancing luminance contrast in areas of intermediate brightness.

Geophysical survey is the systematic collection of geophysical data for spatial studies. Detection and analysis of the geophysical signals forms the core of Geophysical signal processing. The magnetic and gravitational fields emanating from the Earth's interior hold essential information concerning seismic activities and the internal structure. Hence, detection and analysis of the electric and Magnetic fields is very crucial. As the Electromagnetic and gravitational waves are multi-dimensional signals, all the 1-D transformation techniques can be extended for the analysis of these signals as well. Hence this article also discusses multi-dimensional signal processing techniques.

<i>k</i>-space in magnetic resonance imaging

In magnetic resonance imaging (MRI), the k-space or reciprocal space is obtained as the 2D or 3D Fourier transform of the image measured. It was introduced in 1979 by Likes and in 1983 by Ljunggren and Twieg.

In condensed matter physics, the dynamic structure factor is a mathematical function that contains information about inter-particle correlations and their time evolution. It is a generalization of the structure factor that considers correlations in both space and time. Experimentally, it can be accessed most directly by inelastic neutron scattering or X-ray Raman scattering.

<span class="mw-page-title-main">Visual tilt effects</span>

Due to the effect of a spatial context or temporal context, the perceived orientation of a test line or grating pattern can appear tilted away from its physical orientation. The tilt illusion (TI) is the phenomenon that the perceived orientation of a test line or grating is altered by the presence of surrounding lines or grating with a different orientation. And the tilt aftereffect (TAE) is the phenomenon that the perceived orientation is changed after prolonged inspection of another oriented line or grating.

In digital signal processing, multidimensional sampling is the process of converting a function of a multidimensional variable into a discrete collection of values of the function measured on a discrete set of points. This article presents the basic result due to Petersen and Middleton on conditions for perfectly reconstructing a wavenumber-limited function from its measurements on a discrete lattice of points. This result, also known as the Petersen–Middleton theorem, is a generalization of the Nyquist–Shannon sampling theorem for sampling one-dimensional band-limited functions to higher-dimensional Euclidean spaces.

<span class="mw-page-title-main">Frequency selective surface</span> Optical filter

A frequency-selective surface (FSS) is any thin, repetitive surface designed to reflect, transmit or absorb electromagnetic fields based on the frequency of the field. In this sense, an FSS is a type of optical filter or metal-mesh optical filters in which the filtering is accomplished by virtue of the regular, periodic pattern on the surface of the FSS. Though not explicitly mentioned in the name, FSS's also have properties which vary with incidence angle and polarization as well - these are unavoidable consequences of the way in which FSS's are constructed. Frequency-selective surfaces have been most commonly used in the radio frequency region of the electromagnetic spectrum and find use in applications as diverse as the aforementioned microwave oven, antenna radomes and modern metamaterials. Sometimes frequency selective surfaces are referred to simply as periodic surfaces and are a 2-dimensional analog of the new periodic volumes known as photonic crystals.

In physics, a sinusoidal plane wave is a special case of plane wave: a field whose value varies as a sinusoidal function of time and of the distance from some fixed plane. It is also called a monochromatic plane wave, with constant frequency.

References

  1. "ISO 80000-3:2019 Quantities and units — Part 3: Space and time" (2 ed.). International Organization for Standardization. 2019. Retrieved 2019-10-23. (11 pages)
  2. SPIE Optipedia article: "Spatial Frequency"
  3. The symbol is also used to represent temporal frequency, as in, e.g., Planck's formula.
  4. Martinez LM, Alonso JM (2003). "Complex receptive fields in primary visual cortex". Neuroscientist. 9 (5): 317–31. doi:10.1177/1073858403252732. PMC   2556291 . PMID   14580117.
  5. De Valois, R. L.; De Valois, K. K. (1988). Spatial vision. New York: Oxford University Press.
  6. Issa NP, Trepel C, Stryker MP (2000). "Spatial frequency maps in cat visual cortex". The Journal of Neuroscience. 20 (22): 8504–8514. doi:10.1523/JNEUROSCI.20-22-08504.2000. PMC   2412904 . PMID   11069958.
  7. Teller, DY (1984). "Linking propositions". Vision Research. 24 (10): 1233–1246. doi:10.1016/0042-6989(84)90178-0. PMID   6395480. S2CID   6146565.
  8. Glezer, V. D. (1995). Vision and mind: Modeling mental functions. Lawrence Erlbaum Associates, Inc. https://doi.org/10.4324/9780203773932
  9. Barghout, Lauren (2014). Vision: How Global Perceptual Context Changes Local Contrast Processing (Ph.D. Dissertation 2003). Updated for Computer Vision Techniques. Scholars' Press. ISBN   978-3-639-70962-9.
  10. Westheimer, G. "The Fourier Theory of Vision"
  11. Blake, R. and Sekuler, R., Perception, 3rd ed. Chapter 3. ISBN   978-0-072-88760-0
  12. Pinel, J. P. J., Biopsychology, 6th ed. 293–294. ISBN   0-205-42651-4
  13. Bar M (Aug 2004). "Visual objects in context". Nat. Rev. Neurosci. 5 (8): 617–29. doi:10.1038/nrn1476. PMID   15263892. S2CID   205499985.
  14. Awasthi B, Friedman J, Williams MA (2011). "Faster, stronger, lateralized: Low spatial frequency information supports face processing". Neuropsychologia. 49 (13): 3583–3590. doi:10.1016/j.neuropsychologia.2011.08.027. PMID   21939676. S2CID   10037045.
  15. Ben-Yehudah G, Ahissar M (May 2004). "Sequential spatial frequency discrimination is consistently impaired among adult dyslexics". Vision Res. 44 (10): 1047–63. doi: 10.1016/j.visres.2003.12.001 . PMID   15031099. S2CID   12605281.