Sport Flight Talon | |
---|---|
Talon XP | |
Role | Kit aircraft |
National origin | United States |
Manufacturer | Sport Flight Aviation |
Introduction | 1989 |
Status | Production completed |
Developed from | Maxair Drifter |
Variants | Advanced Aviation Explorer |
The Sport Flight Talon is a high-wing, pusher configuration single-engine, conventional landing gear homebuilt aircraft or ultralight aircraft, that was produced by Sport Flight Aviation of Sandy, Oregon in kit form for amateur construction. [1] [2] [3] [4] [5] [6]
The aircraft is no longer offered on the company website and seems to be out of production. [7]
The Talon was developed from the Maxair Drifter and introduced into the market in 1989. The aircraft shares the Drifter's main fuselage tube, used as the aircraft's spine. The rudder pedals attach to the front of the tube, the seat and wing support structure to the center and the tail to the rear of the tube. The main improvements over the original Drifter include strut-braced wings with jury struts, flaps, streamlined baggage area, optional enclosed cockpit, wheel pants and brakes. The addition of many options and extras over the basic Drifter design means that the Talon cannot be constructed in the US FAR 103 Ultralight Vehicles category, due to exceeding the maximum 254 lb (115 kg) category empty weight and must instead be registered as a homebuilt aircraft in the USA. In other countries, such as Canada, the Talon fits the ultralight or microlight aircraft category. [1]
The aircraft's structure is made from 6061-T6 aluminum, with the main landing gear struts of 4130 steel. The aluminum frame wing is covered in pre-sewn Dacron envelopes. Construction time from the kit is reported as 120 hours. [1]
The basic Talon design has been developed into a series of single and tandem two seaters, with varying powerplants. [2] [3] [4] [5]
Data from Talon XP Preliminary Assembly Manual [9]
General characteristics
Performance
The Advanced Aviation Explorer is a two-seat ultralight marketed in kit form, for amateur construction. It is a high-wing taildragger aircraft of pusher configuration with tandem seating.
The Best Off Skyranger is a French-designed two-seat ultralight utility aircraft, produced by Best Off, of Toulouse. It is a high-wing conventional monoplane with tricycle undercarriage, and of fabric-covered tubular construction.
Quicksilver is a line of single and two-place high wing, single-engine, ultralight aircraft that evolved from weight-shift hang gliders including Bob Lovejoy's High Tailer.
The Quad City Challenger is a family of one and two seats-in-tandem, pusher configuration, tricycle landing gear ultralight aircraft that is designed and produced by Quad City Aircraft Corporation of Moline, Illinois. The Challenger was first introduced in 1983.
The Lockwood Drifter is a family of high wing, single engine, pusher configuration, open cockpit, one and two-seat kit aircraft that was first introduced in the 1980s by Maxair and remains in production today by Lockwood Aircraft of Sebring, Florida.
The Flightstar is a large family of single and two-seat, high wing, single engined kit aircraft that was produced by Flightstar Sportplanes of South Woodstock, Connecticut. In 2009 the rights, tooling and parts inventory were sold to Yuneec International of China when Flightstar Sportplanes' business was wound up.
The CGS Hawk is a family of high wing, strut-braced, pusher configuration, single and two-seats-in-tandem ultralight aircraft, designed by Chuck Slusarczyk and manufactured by CGS Aviation.
The Excalibur is an American two seats-in-tandem, high wing, pusher configuration ultralight aircraft that is manufactured in kit form for amateur construction, by Excalibur Aircraft of Sebring, Florida. It was introduced in 1993.
The Rans S-12 Airaile is a family of related American single-engined, pusher configuration, high-wing monoplanes designed by Randy Schlitter and manufactured by Rans Inc. The aircraft are available in kit form for amateur construction.
The Flying K Sky Raider is a family of American, high wing, strut-braced, single engine, conventional landing gear ultralight aircraft that was designed by Ken Schrader and produced by Flying K Enterprises and later Sky Raider LLC of Caldwell, Idaho for amateur construction.
The Golden Circle Air T-Bird is a family of high-wing, strut-braced, pusher configuration ultralight aircraft that was produced by Teratorn Aircraft of Clear Lake, Iowa from 1983 to 1989 and then Golden Circle Air of De Soto, Iowa from 1989 until the mid-2000s. From 2011-2021 the aircraft were back in production by Indy Aircraft and from 2021 on by Tbird Aircraft. The aircraft is produced as a kit for amateur construction.
The Earthstar Thunder Gull is a family of cantilever high-wing, tricycle gear ultralight aircraft, manufactured by Earthstar Aircraft of Santa Margarita, California as a kit for amateur construction or as a completed aircraft.
The Titan Tornado is large family of cantilever high-wing, pusher configuration, tricycle gear-equipped kit aircraft manufactured by Titan Aircraft of Austinburg, Ohio, for amateur construction.
The Joplin Tundra is a family of Canadian, high-wing, strut-braced, pusher configuration ultralight aircraft that was originally produced by Back Forty Developments of Campbellford, Ontario, Canada and later by Joplin Light Aircraft of Joplin, Missouri and Laron Aviation of Borger, Texas for amateur construction. The aircraft is out of production.
The Bailey-Moyes Dragonfly is an Australian-American two-seats-in-tandem, high-wing, strut-braced, open cockpit, conventional landing gear-equipped ultralight aircraft. The aircraft has been in production since 1990 and was designed as a special-purpose tug for hang gliders and ultralight sailplanes. It is available as a complete aircraft or as a kit for amateur construction. The aircraft has been variously produced by Moyes Microlights, Bailey-Moyes Microlights and currently LiteFlite of Botany, New South Wales, all different iterations of the same company.
The SlipStream Genesis is a family of American, strut-braced, high wing, pusher configuration, tricycle gear aircraft, produced in kit form, for amateur construction. Designed by Chuck Hamilton, the series were originally produced by Innovation Engineering of Davenport, Iowa and more recently by SlipStream International of Wautoma, Wisconsin.
The Raj Hamsa X-Air is an Indian, two-seat, high-wing, tricycle gear, tractor configuration, ultralight aircraft produced by Raj Hamsa Ultralights of Bangalore, Karnataka in kit form, for amateur construction.
The Rainbow Aerotrike is a family of South African two-seat ultralight trikes, made by Rainbow Aircraft of Edenvale, Gauteng and available in kit form for amateur construction or fully assembled. The type has been noted for its long-distance flights.
The Air Creation GT and Clipper are a series of French two-seat flying wing ultralight trikes that was designed and produced by Air Creation.
The BAaer Gurí is an Argentine ultralight aircraft, designed and produced by BAaer (BA-Aeroplanos) of Buenos Aires. When it was available the aircraft was supplied as a kit for amateur construction.