The Staunau was a German automobile manufactured from 1950 until 1951.
Karl-Heinz Staunau was an entrepreneur from Hamburg-Harburg who had enjoyed some success as a manufacturer of commercial machines for ice cream and bakery businesses during the years following the war. By the late 1940s he had set his sights on a larger share of the Wirtschaftswunder (West German economic miracle) that was to become a feature of post-war reconstruction. With the help of a former aircraft engineer Staunau developed in a few months a small two door four seater fastback bodied car to a point where he said it was ready for production. [1]
The design combined a crude but modern looking body with the front-wheel drive running gear from a DKW and an engine from Ilo, a major manufacturer of motor-bike engines. The resulting 389 cc 2-cylinder 2-stroke powered Staunau Type K400 used a three speed manual transmission and was spectacularly underdeveloped and underpowered, but very competitively priced. The same body was used for the more powerful Staunau Type K750 which employed a four speed manual transmission and was powered by a 748cc 2-cylinder 2-stroke motor. Claimed power outputs for the two version were respectively 9.5 kW (13 PS) and 18 kW (25 PS) which were said to allow for top speeds of 92 km/h (57 mph) and 105 km/h (65 mph). By the time the end came, the company had manufactured 64 of the Type K400s and 16 Type K750s. The English writer and distinguished automobile historian David Burgess-Wise describes the Staunau automobile as "probably one of the worst small cars ever made after World War II."
In a previous career Staunau had been an expert in advertising, and reports started to appear that the US Chrysler Corporation was keen to incorporate the Staunau cars into its range for a future European sales programme. Many in the press were happy to disseminate these reports. More disturbingly many people were persuaded to part with their savings in order to invest in Staunau's business. When inevitable bankruptcy ensued, Karl-Heinz Staunau purchased a flight to South America, and so from the point of view of his German creditors, disappeared from view. [2]
The Ford Köln is an automobile that was produced by Ford Germany from 1933 until 1936 at its Cologne plant.
The Ford Eifel is a car manufactured by Ford Germany between 1935 and 1940. It initially complemented, and then replaced, the Ford Köln. It was itself replaced by the Ford Taunus.
The Opel Admiral is a luxury car made by the German car manufacturer Opel from 1937 to 1939 and again from 1964 to 1977.
F103 is the internal designation for a series of car models produced by Auto Union GmbH in West Germany from 1965 to 1972, derived from the earlier DKW F102. To signify the change from a two-stroke to four-stroke engine, the DKW marque was dropped in favour of Audi, a name that had been dormant since before the Second World War.
The DKW F8 compact front-wheel drive two-stroke engined saloon was introduced in 1939. The F8 was slightly shorter than its predecessor despite having a marginally increased wheelbase. The base model, known as the Reichsklasse, was manufactured only till 1940 but the Meisterklasse sedan continued in production until 1942. In addition to the saloons, cabriolet versions were offered.
The DKW Junior was a small front wheel drive saloon manufactured by Auto Union AG. The car received a positive reaction when first exhibited, initially badged as the DKW 600, at the Frankfurt Motor Show in March 1957. The ‘Junior’ name was given to the DKW 750 in 1959 when the car went into volume production, but failed to survive an upgrade in January 1963, after which the car was known as the DKW F12. In addition to the saloon, a pretty ‘F12 Roadster’ was produced in limited numbers.
The Mercedes-Benz Mannheim 350 replaced the W03/Typ 350 models in 1929. The structure originated by Ferdinand Porsche was modified by Hans Nibel.
The Audi Type E was a passenger car introduced by Audi in 1913. It was the largest pre-war car from Audi.
The Audi Type P was a small two-door sedan/saloon car introduced by Audi in 1931. It was discontinued by 1932.
The Audi Type R was a large car produced by Audi between 1928 and 1932 as a successor to the Audi Type M.
The Audi Type SS was a large, eight-cylinder-powered sedan/saloon car introduced by Audi in 1929 in succession to the Type R "Imperator".
The Glas V8 is a V8-engined coupé produced by Hans Glas GmbH at Dingolfing. The car was first presented in September 1965 at the Frankfurt Motor Show, where it became nicknamed the "Glaserati" because of its Frua design, which shared many themes with contemporary Maseratis.
The Glas GT is a sports coupé produced by Hans Glas GmbH at Dingolfing. The car was first presented as the Glas 1300 GT in September 1963 at the Frankfurt Motor Show, with volume production starting in March 1964. The much rarer cabriolet version appeared in May 1965 and a larger engined 1700 GT in May 1965.
The Goliath Pionier is a small three-wheeled two-seater vehicle first presented by Carl F. W. Borgward at the 1931 Berlin motor show. It remained in production until 1934, by when approximately 4,000 had been produced.
The DKW F2 was a small car produced at the company’s Zwickau plant by DKW between 1932 and 1935. Launched at the Berlin Motor Show in April 1932, it shared its 584cc engine and front wheel drive configuration with its predecessor, but came with a longer wheelbase and a larger body.
The DKW F4 Meisterklasse was a small car produced at the company’s Zwickau plant by DKW between 1934 and 1935. It shared its 692cc engine and front wheel drive configuration with its immediate predecessor, the DKW F2 Meisterklasse, along with its 2,610 mm (103 in) wheelbase, but the body had been restyled again, and was now more stylish, the perpendicular rear end of the F2 now replaced with a sloping rear on the mainstream body types
The Benz 10/25 PS was a midsize automobile introduced by Benz & Cie in 1912. The same year stated maximum output was increased which meant a name change to Benz 10/30 PS. The model disappeared for three years following the First World War but returned in 1921. A further power increase in 1926 meant another name change, now to Benz 10/35 PS. Following the "fusion" between the Daimler and Benz companies, production of the Benz 10/35 PS ended in 1927.
The Mercedes-Benz W02 was a midsize six-cylinder two-litre-engined automobile introduced by Daimler-Benz at the Berlin Motor Show in October 1926. It was developed in some haste under the manufacturer's Technical Director, Ferdinand Porsche in parallel with the smaller Mercedes-Benz W 01 and the larger three-litre-engined Mercedes-Benz W03 following the creation of Daimler-Benz, formally in July 1926, from the fusion of the Daimler and Benz & Cie auto-businesses.
The Mercedes-Benz W11 was a midsize six-cylinder automobile introduced by Daimler-Benz it 1929. It was developed from the Mercedes-Benz W02 first seen in 1926, and the W11 shared its chassis and bodywork with the W02, but the W11 came with a larger more powerful engine, a new name and a wider list of “standard bodies” from which customers could choose.
The Mercedes-Benz W03 was a large six-cylinder-engined automobile introduced as the Mercedes-Benz 12/55 PS and, initially, as the Mercedes-Benz Typ 300, by Daimler-Benz at the Berlin Motor Show in October 1926. It was developed in some haste under the manufacturer's Technical Director, Ferdinand Porsche in parallel with the smaller Mercedes-Benz W 01 and the two-litre-engined Mercedes-Benz W02 following the creation of Daimler-Benz, formally in July 1926, from the fusion of the Daimler and Benz & Cie auto-businesses.
This entry includes information from the equivalent entry in the German Wikipedia.