Related Research Articles
The Piper PA-15 Vagabond and PA-17 Vagabond are both two-seat, high-wing, conventional gear light aircraft that were designed for personal use and for flight training and built by Piper Aircraft starting in 1948.
The Piper PA-16 Clipper is an extended fuselage model of the PA-15 Vagabond. Both models were designed in 1947 for the same reason – Piper Aircraft found itself in dire financial straits and needed to create new, competitive models using existing parts and tooling. The result was the Vagabond, essentially a side-by-side version of the tandem J-3 Cub credited with saving the company.
The Piper J-5 Cub Cruiser was a larger, more powerful version of the basic Piper J-3 Cub. It was designed just two years after the J-3 Cub, and differed by having a wider fuselage with the pilot sitting in the front seat and two passengers sitting in the rear seat. Equipped with a 75-hp Continental engine the plane's cruising speed was 75 mph. Though officially a three-seater, it would be more accurately described as a "two-and-a-half-seater", as two adults would find themselves quite cramped in the wider rear seat. The Cruiser sold for $1,798 when it was first designed.
The Call-Air Model A is an American two- to three-seat utility aircraft designed by the Call brothers and built by the Call Aircraft Company, later developed into a successful line of agricultural aircraft.
The AS/SA 202 Bravo is a two to three-seat civil light aircraft jointly designed and manufactured by the Swiss company Flug- und Fahrzeugwerke Altenrhein (FFA) and the Italian company Savoia-Marchetti. The aircraft was designated the AS 202 in Switzerland, and the SA 202 in Italy.
The Malmö MFI-10 Vipan was a four-seat light utility monoplane designed and built in Sweden by Malmö Flygindustri. Only three aircraft were built and the type did not enter quantity production.
The Maule M-7 is a family of single-engine light aircraft that has been manufactured in the United States since the mid-1980s.
The Robin DR.200 is a family of French conventional landing gear single-engined light touring or training cabin monoplanes. Originally produced by Centre Est Aéronautique the company later changed its name to Avions Pierre Robin.
The Normand Dube Aerocruiser is a Canadian single-engined, two-seat bushplane designed by Normand Dube and supplied as a kit for homebuilding by Aviation Normand Dube of Sainte-Anne-des-Plaines, Quebec.
The Stewart Headwind JD1HW1.7 and SAC-1VW is a single-seat high-wing tube-and-fabric construction homebuilt aircraft.
The W.A.R. FW-190 is a half-scale homebuilt replica of a Focke-Wulf Fw 190 fighter. In July 1973, War Aircraft Replicas International of Santa Paula, California began design of an approximately half-scale replica of the Fw 190, the first of a series of replicas of World War II aircraft using similar constructional techniques. The first prototype made its maiden flight on 21 August 1974.
The Bharat Swati is an Indian two-seat training monoplane designed by the Technical Centre of Directorate General of Civil Aviation and built by Bharat Heavy Electricals Limited.
The Preceptor STOL King is an American STOL amateur-built aircraft that was designed and produced by Preceptor Aircraft, of Rutherfordton, North Carolina. When it was available the aircraft was supplied as plans or as a kit for amateur construction.
The XtremeAir Sbach 342 (XA42) is a German high performance two-seat aerobatic and touring monoplane designed by Philipp Steinbach with Albert Mylius and built by XtremeAir GmbH of Hecklingen.
The Goair Trainer is an Australian single-engined, two-seat, training or touring cabin monoplane designed and built by Goair Products at Bankstown Airport in Sydney, Australia.
The Nexaer LS1 is an American light-sport aircraft, under development by Nexaer of Peyton, Colorado and first flown on 16 October 2006. The aircraft is intended to be supplied as a complete ready-to-fly-aircraft.
The Sport Performance Aviation Panther is a single seat, all-metal, homebuilt aircraft under development by Sport Performance Aviation of Green Cove Springs, Florida. The aircraft is intended to be supplied as plans and as a kit for amateur construction.
The Shirlen Big Cootie is an American homebuilt biplane that was designed by Roy Shirlen.
The Williams-Cangie WC-1 Sundancer is an American homebuilt biplane racing aircraft that was designed by Art Williams and Carl Cangie and built by Ralph Thenhaus in 1974. Plans were at one time available from Williams' company, the Williams Aircraft Design Co of Northridge, California. Only one was built.
The Sea Storm is an Italian homebuilt amphibious flying boat that was designed and produced by Storm Aircraft of Sabaudia. Storm Aircraft was originally called SG Aviation srl. When it was available the aircraft was supplied as a kit for amateur construction.
References
- ↑ Don Dwiggins (Winter 1971). "Meet the Foo Fighter". Sports Planes.
- ↑ Stewart Aircraft Corporation. "Stewart Aircraft Michigan". stewartaircraft.com. Archived from the original on 3 March 2016. Retrieved 8 September 2020.
- ↑ Sport Aviation, Jan 1973, pp 53-55. Foo Fighter Flight Report
- Sport Aviation, Jan 1973, pp 53–55. Foo Fighter Flight Report