Circa Reproductions Nieuport

Last updated
Circa Reproductions Nieuport
Role Homebuilt warbird replica
National origin Canada
Manufacturer Circa Reproductions
DesignerGraham Lee
First flightJuly 1984
Number builtover 325 (Nieuport 11 as of 2003)

The Circa Reproductions Nieuports are a family of Canadian 7/8 scale World War I sesquiplane aircraft replicas designed by Graham Lee of Lamont, Alberta for amateur construction from plans sold by Lee's company Circa Reproductions. Leading Edge Air Foils of Peyton, Colorado at one time also made construction kits available. Lee's Nieuports were among the earliest First World War replicas available and paved the way for later companies to produce plans and kits for a great variety of warbirds. [1] [2] [3] [4] [5] [6]

Contents

The aircraft's design was attributed to "the result of many years of affection for WWI type aircraft and a "too limited" flying budget." [5]

Design and development

The Nieuport 11 was the first design in the family and is a 7/8 (87%) scale version of the original French Nieuport 11 Bebe fighter. The prototype, registered as a Canadian basic ultralight as C-IRCA, first flew in July 1984. [3] [4] [6]

The Nieuport 11 is constructed from 6061-T6 aluminum tubing, supported with 2024-T3 aluminum gussets, held together with blind rivets. At one point welded steel tube fuselages were also available. The wings, tail and fuselage are then covered with doped aircraft fabric. Landing gear is conventional, with 24 in (61 cm) spoked mainwheels with bungee suspension. The original design calls for a tailskid, the same as the World War One original aircraft, but since the skid is impractical on hard surfaced runways, a tailwheel is optional. The engine cowling is a horseshoe shaped semi-circular design. [1] [4] [6]

Recommended engines for the aircraft include the 40 hp (30 kW) Rotax 447, the 50 hp (37 kW) Rotax 503, Volkswagen air-cooled engines and various Hirth engines. The designer estimated that the Nieuport 11 would take 400 hours to construct. [3] [4] [5] [6]

The aircraft have been described as being "very easy to fly, even by novice pilots." [4]

By 2015 over 1200 sets of plans had been sold. [7]

Operational history

The Nieuport 11 won Grand Champion Light Plane at Oshkosh in 1989 and the Nieuport 12 won Reserve Grand Champion at Oshkosh in 1990. [5]

Variants

Nieuport 11
Single seat 7/8 scale reproduction of the Nieuport 11 fighter of 1916. First flown in July 1984. Kits were available in ultralight and experimental versions to meet United States FAR 103 Ultralight Vehicles and Experimental amateur-built regulations respectively. The ultralight version uses lighter tubing, engine and wheels to save weight. [2] [3] [4] [5]
Nieuport 12
Two seat 7/8 scale reproduction of the Nieuport 12 WWI observation aircraft, first flown in 1989. The designer estimates construction time at 1400 hours. Aircraft has 1,000 lb (454 kg) gross weight. Recommended engines include the 64 hp (48 kW) Rotax 582, 65 hp (48 kW) Continental A65, 65 hp (48 kW) Lycoming O-145 or 60 hp (45 kW) Volkswagen air-cooled engine. [1] [3] [5]
Nieuport 17
Single seat 7/8 scale reproduction of the Nieuport 17 WWI fighter aircraft. This variant is similar to the Nieuport 11, but with a 2 ft (61 cm) greater wingspan and a completely circular engine cowling. The designer estimates construction time at 400 hours. [5]

Specifications (Nieuport 11 Bebe)

Three view drawing of the Nieuport 11 Nieuport-Macchi 11000 (Ni 11) French First World War single seat fighter colourized drawing.jpg
Three view drawing of the Nieuport 11

Data from Raisner [5]

General characteristics

Performance

Armament

Avionics

See also

Related Research Articles

<span class="mw-page-title-main">Fisher Avenger</span> Canadian ultralight aircraft

The Avenger is a single-seat, Canadian low-wing, tractor configuration ultralight aircraft. The Avenger was introduced in 1994 and is available as a kit or as plans from Fisher Flying Products.

The Adams CA-2 is a single seat, low-wing, American ultralight aircraft that was designed by Frank Griffith of Corning Aircraft around 1992 and was available as plans for amateur construction until 1999. In 1999, Hummel Aviation of Bryan, Ohio began offering the design. Although the design was well received, plans were no longer listed as being available from Hummel Aviation as of 2007.

The Airdrome Dream Classic is a minimalist, high wing, single seat, single engine ultralight aircraft inspired by the 1908 Santos-Dumont Demoiselle and produced in kit form by Airdrome Aeroplanes of Holden, Missouri.

<span class="mw-page-title-main">Lockwood Drifter</span> Type of aircraft

The Lockwood Drifter is a family of high wing, single engine, pusher configuration, open cockpit, one and two-seat kit aircraft that was first introduced in the 1980s by Maxair and remains in production today by Lockwood Aircraft of Sebring, Florida.

<span class="mw-page-title-main">Airdrome Eindecker E-III</span> Type of aircraft

The Airdrome Eindecker E-III is a single-seat, mid-wing, conventional landing gear fighter aircraft replica produced in kit form by Airdrome Aeroplanes of Holden, Missouri.

<span class="mw-page-title-main">Flightstar</span> Type of aircraft

The Flightstar is a large family of single and two-seat, high wing, single engined kit aircraft that was produced by Flightstar Sportplanes of South Woodstock, Connecticut. In 2009 the rights, tooling and parts inventory were sold to Yuneec International of China when Flightstar Sportplanes' business was wound up.

The Fisher FP-303 is a Canadian single-seat, low wing, conventional landing gear, single engined light kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.

<span class="mw-page-title-main">Fisher FP-404</span> Canadian homebuilt light aircraft

The Fisher FP-404 is a Canadian single-seat, conventional landing gear, single-engined biplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.

The Fisher Youngster is a Canadian single-seat, conventional landing gear, single-engined, biplane kit aircraft designed for construction by amateur builders. The aircraft was inspired by the German Bücker Bü 133 Jungmeister aerobatic aircraft of the 1930s.

<span class="mw-page-title-main">CGS Hawk</span> Type of aircraft

The CGS Hawk is a family of high wing, strut-braced, pusher configuration, single and two-seats-in-tandem ultralight aircraft, designed by Chuck Slusarczyk and manufactured by CGS Aviation.

<span class="mw-page-title-main">Team Mini-Max Hi-MAX</span> American kit aircraft

The Team Mini-Max Hi-MAX is a single-seat, high wing, strut-braced, single engine aircraft available in kit form for amateur construction. It first flew in 1987 and is a high wing development of the Mini-MAX, hence its model name.

<span class="mw-page-title-main">Sorrell Hiperlight</span> American ultralight biplane

The Sorrell Hiperlight is a family of single and two seat, negative stagger biplanes, designed for amateur construction.

<span class="mw-page-title-main">Preceptor N3 Pup</span> American kit aircraft

The Preceptor N3 Pup is a family of ultralight, tube-and-fabric, high-wing, homebuilt aircraft. Kits were produced and marketed by Preceptor Aircraft, of Rutherfordton, North Carolina. The company was operating on a limited basis, actively selling plans online, but seems to have gone out of business in 2016.

<span class="mw-page-title-main">Hipp's Superbirds J-3 Kitten</span> Type of aircraft

The Hipp's Superbirds J-3 Kitten and related designs are a family of single-engined, single seat, high wing conventional landing gear-equipped aircraft available in kit form or as plans from Hipp's Superbirds of Saluda, North Carolina.

The Light Miniature Aircraft LM-1, LM-2 and LM-3 are a family of American high wing, conventional landing gear, strut-braced, single engine ultralight aircraft that are scale reproductions of famous general aviation aircraft. The designs were all available as plans from Light Miniature Aircraft of Okeechobee, Florida for amateur construction.

The Rocky Mountain Wings Ridge Runner is a family of American high wing, strut-braced, single engine, conventional landing gear aircraft that were designed by Stace Schrader and were produced by Rocky Mountain Wings of Nampa, Idaho for amateur construction from 2000 to 2018.

The Loehle SPAD XIII is an American single-seat ultralight aircraft scale replica of the First World War SPAD XIII fighter produced in kit form by Loehle Aircraft for amateur construction.

<span class="mw-page-title-main">Carlson Sparrow</span> Type of aircraft

The Carlson Sparrow is a family of American, high wing, strut-braced, single engine, ultralight aircraft that was designed by Ernst W. Carlson and produced by Carlson Aircraft of East Palestine, Ohio and later Skyline Technologies of Salem, Ohio for amateur construction.

The Arnet Pereyra Sabre II is an American, two-seats in side-by-side configuration, conventional landing gear-equipped, strut-braced, high-wing ultralight trainer that was produced by Arnet Pereyra Inc of Rockledge, Florida in kit form for amateur construction.

The Howland H-3 Pegasus is an American ultralight aircraft that was designed by Bert Howland and made available by Howland Aero Design in the form of plans for amateur construction, with kits provided by Aircraft Spruce & Specialty Co. The H-3 first flew in 1988.

References

  1. 1 2 3 Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, page 194. BAI Communications. ISBN   0-9636409-4-1
  2. 1 2 Kitplanes Staff: 1999 Plans Aircraft Directory, Kitplanes, Volume 16, Number 1, January 1999, page 56. Primedia Publications. IPM 0462012
  3. 1 2 3 4 5 Downey, Julia: 2003 Plans Aircraft Directory, Kitplanes, Volume 20, Number 1, January 2003, page 18. Primedia Publications. ISSN 0891-1851
  4. 1 2 3 4 5 6 Cliche, Andre: Ultralight Aircraft Shopper's Guide 8th Edition, page B-43 Cybair Limited Publishing, 2001. ISBN   0-9680628-1-4
  5. 1 2 3 4 5 6 7 8 Raisner, William: LEAF catalog, pages 409-412. Leading Edge Airfoils, 1995.
  6. 1 2 3 4 Bayerl, Robby; Martin Berkemeier; et al: World Directory of Leisure Aviation 2011-12, page 97. WDLA UK, Lancaster UK, 2011. ISSN 1368-485X
  7. Tacke, Willi; Marino Boric; et al: World Directory of Light Aviation 2015-16, page 104. Flying Pages Europe SARL, 2015. ISSN   1368-485X