Trike | |
---|---|
Role | Ultralight trike |
National origin | United States |
Manufacturer | Leading Edge Air Foils |
Status | Production completed |
The LEAF Trike is an American ultralight trike that was designed and produced by Leading Edge Air Foils in the 1980s. The aircraft was supplied as a kit for amateur construction. [1]
The aircraft was designed to comply with the US FAR 103 Ultralight Vehicles rules, including the category's maximum empty weight of 254 lb (115 kg). The Trike has a standard empty weight of 149 lb (68 kg), plus the weight of the wing. It is a very minimalist design and features a cable-braced hang glider-style high-wing, weight-shift controls, a single-seat, open cockpit, tricycle landing gear and a single engine in pusher configuration. [1]
The aircraft frame is made from bolted-together aluminum tubing, with its hang glider wing covered in Dacron sailcloth. The kit was supplied without a wing as any suitable hang glider wing can be used, provided it has adequate gross weight for the pilot and the carriage. The LEAF Talon 215 wing was recommended for the aircraft. The aircraft's gross weight and performance depends on the type of wing used. [1]
The carriage design features a cable in place of the usual front tube, to allows easier folding for ground transportation. The landing gear uses 20 in (51 cm) main wheels and a steerable 16 in (41 cm) nose wheel. The powerplant was normally a Cuyuna UL-II-02 of 35 hp (26 kW) with a 2:1 reduction drive or optionally a Cuyuna 430 of 30 hp (22 kW). [1]
The Trike was later replaced in the LEAF product line by the LEAF Tukan. [2]
Data from Cliche [1]
General characteristics
Performance
The Goldwing Ltd Goldwing is an American ultralight aircraft that was designed by Craig Catto and Brian Glenn and produced by Goldwing Ltd. The aircraft was supplied as a complete factory-built aircraft only and no kits or plans were offered.
The Manta Foxbat is an American ultralight aircraft that was designed by Bill Armour and produced by Manta Products Inc of Oakland, California. The aircraft was supplied as a kit for amateur construction.
The Pinaire Ultra-Aire is an American ultralight aircraft that was designed and produced by Pinaire Engineering. The aircraft was supplied as a kit for amateur construction.
The Cloudbaser Trikes Cloudbaser is a flying wing ultralight trike that was designed and produced by Cloudbaser Trikes. The aircraft was supplied as a kit and was also available as plans for amateur construction.
The J & J Ultralights Tukan is an American ultralight trike that was marketed by J & J Ultralights, Leading Edge Air Foils and Kemmeries Aviation. The aircraft was supplied as a kit, as parts and as plans for amateur construction.
The Mountaineer Trikes Mite-Lite is a family of American flying wing ultralight trikes that was designed and produced by Mountaineer Trikes. The aircraft were supplied as a kit for amateur construction.
The Antares MA-32 is the first model in a large family of Ukrainian ultralight trikes that is designed and produced by Antares Aircraft and at one time marketed by Leading Edge Air Foils as the LEAF Antares. The aircraft are supplied as kits for amateur construction.
The Buckeye Eclipse and Buckeye Endeavor are a family of American two-seat flying wing ultralight trikes that was designed and produced by Buckeye Industries. The aircraft were supplied fully assembled.
The GibboGear Butterfly is an American single-seat, flying wing ultralight trike that was designed by Mark Gibson and produced by his company, GibboGear of Winter Haven, Florida. The aircraft was supplied as a kit for amateur construction.
The Fletcher Hercules is an American two-seat ultralight trike that was designed by AW Harrison and produced by Fletcher's Ultralights of Turlock, California, in the late 1990s and early 2000s. The aircraft was supplied as a kit for amateur construction and was also available as a completed aircraft.
The LiteWing Aircraft LiteTrike, also called The Lite Trike, is an American ultralight trike that was designed and produced by LiteWing Aircraft of Caryville, Tennessee in the late 1990s. The aircraft was supplied fully assembled.
The Aviate Raptor is a South African two-seat ultralight trike that was designed by Manfred Springer and produced by Aviate Products of Booysens. The aircraft was introduced in 1992 and supplied as a kit for amateur construction.
The Medway EclipseR is a British ultralight trike designed and produced by Medway Microlights. The aircraft is supplied fully factory-built.
The Lookout Mountain SkyCycle, also marketed as The Freedom Machine, is an American ultralight trike that was designed by Matt Taber, produced by Lookout Mountain Flight Park of Rising Fawn, Georgia and introduced in 1997. The aircraft was supplied as a kit for amateur construction and also as plans.
The Buckeye Eagle is an American powered parachute that was designed and produced by Buckeye Industries of Argos, Indiana.
The Apollo Jet Star is a Hungarian ultralight trike, designed and produced by Apollo Ultralight Aircraft of Eger. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
The Apollo Racer GT is a Hungarian ultralight trike, designed and produced by Apollo Ultralight Aircraft of Eger. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
The PowerTrike Light is a German ultralight trike and powered parachute, designed and produced by PowerTrike of Mackenbach. The aircraft is supplied as a complete ready-to-fly-aircraft.
The Trike Icaros Adventure S is a Brazilian ultralight trike, designed and produced by Trike Icaros of São Paulo. The aircraft is supplied complete and ready-to-fly.
The Air Creation Pixel is a French ultralight trike, designed and produced by Air Creation of Aubenas. The aircraft is supplied complete and ready-to-fly or as a kit for amateur construction.