Nieuport Triplane

Last updated
Nieuport Triplane
Nieuport 10 triplane.jpg
Nieport 10 Triplane at Issy-les-Moulineaux airfield, c. 1916
RoleExperimental aircraft
National origin France
Manufacturer Nieuport
Number built3 or 4
Developed from Nieuport 10, 17, and 17bis

The Nieuport Triplanes were a series of experimental stagger-wing triplanes modified from Nieuport 10, 17 and 17bis biplanes during World War I that were built by Nieuport. The exact number built is unknown, but only three or four are known to have been evaluated by the French Army Aviation ( Aviation Militaire ) and the British Royal Flying Corps (RFC) and Royal Naval Air Service (RNAS). None of the aircraft were superior to the fighters already in service and they were not accepted for production.

Contents

Background

Nieuport's chief designer, Gustave Delage  [ fr ], invented a novel staggered triplane wing structure in 1915 in which each of the three wings was supported by a single triangular interplane strut with each wing located at an apex of the triangle. Each wing had a single spar and a narrow chord. He believed that this arrangement would minimize the number of drag-inducing struts and bracing wires needed, improve stability and increase lift. [1] [2]

Nieuport 10 Triplane

Delage first tried out his design by modifying a two-seat Nieuport 10 equipped with a 90-horsepower (67 kW) Le Rhône 9C rotary engine. The upper wing was positioned in front of the pilot, connected to the fuselage by a pair of inverted V struts. The middle wing was the longest of the three and its spar passed through the top of the fuelsage between the two cockpits. It was the only wing fitted with ailerons. The bottom wing had moderate dihedral and was the shortest of the three. It was positioned ahead of the middle wing with its leading edge roughly in line with the trailing edge of the upper wing. Both the middle and lower wings had cutouts at the wing roots to improve the downward visibility of the pilot and observer. [2] [3]

The aircraft was tested by the French Army Aviation in 1916, although no data has survived. Its performance may not have been unsatisfactory as Nieuport was authorized to produce a fighter model later that year. [3]

Nieuport 17 Triplane

Nieuport 17 Triplane showing its unusual wing stagger Nieuport 17 triplane.jpg
Nieuport 17 Triplane showing its unusual wing stagger

Delage based his next triplane, serial numbered N1388, on a single-seat Nieuport 17 biplane that was armed with a synchronized Lewis machine gun forward of the pilot. It was powered by a 110-horsepower (82 kW) Le Rhône 9J rotary fitted with Nieuport's cone de penetration. [Note 1] In this aircraft Delage reversed the positions of the upper and middle wings, with the upper wing now mounted above and to the rear of the cockpit. The middle wing was the furthest forward of the three with its leading edge just behind the engine cowling. Despite cutouts at its roots, the wing blocked much of the pilot's downward view. Additionally, the ailerons were transferred to the upper wings. [3] [5]

N1388 was tested by the French in late 1916 and it was declared obsolete in November. The RFC acquired N1388, now armed with a French version of the Vickers machine gun that was incompatible with British ammunition, in January 1917 and began testing it on the orders of Brigadier-General Hugh Tenchard, Commander of the RFC in France. Reserialled as A6686, it performed time-to-height tests up to 10,000 ft (3,000 m) on 2 February and demonstrated times that were slightly superior to those of the Nieuport 17. Trenchard then ordered the aircraft transferred to England for more thorough testing which were conducted in March and April. [6] [7]

The RFC summary report showed the triplane with a pressurized 13.5-imperial-gallon (61 L; 16.2 US gal) fuel tank behind the cockpit, a 9-imperial-gallon (41 L; 11 US gal) gravity-fed tank in front of the pilot as well as a 4.5-imperial-gallon (20 L; 5.4 US gal) lubricating oil tank. The test pilots judged longitudinal stability to be "not very good" and directional stability to be lacking. They assessed controllability to be "good" around all three axes. On the ground, taxiing was "not very good"; it was very tail-heavy and difficult to land well due to a tendency to slew around. Overall they found "the performance of this machine is considerably inferior to that of modern English fighting scouts". [6]

The ultimate fate of A6686 is unknown, but it is possible that it was transferred to the RNAS as N532 which appears in surviving documentation without an engine on 7 June 1917, the RNAS having a shortage of the Le Rhône 9J engines at that time. N532 appears to have been assigned to No. 10 and No. 11 Squadrons of the RNAS and was discarded in February 1918. [8]

Nieuport 17bis triplane

The RNAS acquired another triplane directly from the French in early 1917. This was based on a Nieuport 17bis airframe with the 130-horsepower (97 kW) Clerget 9B rotary engine and was allotted the serial number N521. The fighter retained the same wing layout as the earlier single seater. A second aircraft, serialled N522, had been ordered by the RNAS, but it was cancelled. Comparative trials between N521 and a standard Nieuport 17bis from No. 11 Squadron RNAS were flown in April which revealed that the triplane was 3–4 knots (5.6–7.4 km/h; 3.5–4.6 mph) faster than the biplane at ground level. The biplane may have been equipped with a 110-horsepower (82 kW) Clerget engine which would have caused the slight superiority in speed rather than any merit of the design. N521 briefly saw service with No 11 Squadron in May and June before being transferred to the RNAS air depot as unserviceable by 27 June. It was approved for disposal three days later. [9]

Specifications (Nieuport 17 Triplane)

Data fromThe Complete Book of Fighters: An Illustrated Encyclopedia of Every Fighter Built and Flown; [10] French Warplanes of WWI: A Centennial Perspective on Great War Airplanes; Volume 1: Fighters [11]

General characteristics

Performance

Armament

Notes

  1. This was a spinner that was not attached to the propeller and could rotate freely. [4]

Related Research Articles

<span class="mw-page-title-main">Sopwith Pup</span> British WW1 biplane fighter aircraft

The Sopwith Pup is a British single-seater biplane fighter aircraft built by the Sopwith Aviation Company. It entered service with the Royal Naval Air Service and the Royal Flying Corps in the autumn of 1916. With pleasant flying characteristics and good manoeuvrability, the aircraft proved very successful. The Pup was eventually outclassed by newer German fighters, but it was not completely replaced on the Western Front until the end of 1917. The remaining Pups were relegated to Home Defence and training units. The Pup's docile flying characteristics also made it ideal for use in aircraft carrier deck landing and takeoff experiments and training.

<span class="mw-page-title-main">Nieuport</span> Defunct French aircraft manufacturer

Nieuport, later Nieuport-Delage, was a French aeroplane company that primarily built racing aircraft before World War I and fighter aircraft during World War I and between the wars.

<span class="mw-page-title-main">Nieuport 17</span> French WW1 fighter aircraft

The Nieuport 17 C.1 was a French sesquiplane fighter designed and manufactured by the Nieuport company during World War I. An improvement over the Nieuport 11, it was a little larger than earlier Nieuports and better adapted to the more powerful engine than the interim Nieuport 16. Aside from early examples, it had the new Alkan-Hamy synchronization gear, permitting the use of a fuselage-mounted synchronised Vickers gun firing through the propeller disc.

<span class="mw-page-title-main">Airco DH.2</span> Type of aircraft

The Airco DH.2 was a single-seat pusher biplane fighter aircraft which operated during the First World War. It was the second pusher design by aeronautical engineer Geoffrey de Havilland for Airco, based on his earlier DH.1 two-seater.

<span class="mw-page-title-main">SPAD S.VII</span> French WW1 fighter aircraft

The SPAD S.VII was the first of a series of highly successful biplane fighter aircraft produced by Société Pour L'Aviation et ses Dérivés (SPAD) during the First World War. Like its successors, the S.VII was renowned as a sturdy and rugged aircraft with good climbing and diving characteristics. It was also a stable gun platform, although pilots used to the more manoeuvrable Nieuport fighters found it heavy on the controls. It was flown by a number of the famous aces, such as France's Georges Guynemer, Italy's Francesco Baracca and Australia's Alexander Pentland.

<span class="mw-page-title-main">Nieuport 11</span> French WW1 fighter aircraft

The Nieuport 11, nicknamed the Bébé, is a French World War I single seat sesquiplane fighter aircraft, designed by Gustave Delage. It was the primary aircraft that ended the Fokker Scourge in 1916. The type saw service with several of France's allies, and gave rise to the series of "vee-strut" Nieuport fighters that remained in service into the 1920s.

<span class="mw-page-title-main">Nieuport 27</span> French WW1 fighter aircraft

The Nieuport 27 was a World War I French sesquiplane fighter aircraft designed by Gustave Delage. The 27 was the last of the line of Nieuport "V-strut" single seat fighters that began with the Nieuport 10 of 1914. Operational examples supplemented the very similar Nieuport 24 and 24bis in operational squadrons in late 1917 and many would also be used as advanced trainers.

<span class="mw-page-title-main">Nieuport 10</span> French WW1 aircraft

The Nieuport 10 was a French First World War sesquiplane that filled a wide variety of roles, including reconnaissance, fighter and trainer.

<span class="mw-page-title-main">Le Rhône 9J</span>

The Le Rhône 9J is a nine-cylinder rotary aircraft engine produced in France by Gnome et Rhône. Also known as the Le Rhône 110 hp in a reference to its nominal power rating, the engine was fitted to a number of military aircraft types of the First World War. Le Rhône 9J engines were produced under license in Great Britain by W.H. Allen Son & Company of Bedford, and in Germany by Motorenfabrik Oberursel where it was sold as the Oberursel Ur.II.

<span class="mw-page-title-main">Nieuport 12</span> French WW1 fighter and reconnaissance aircraft

The Nieuport 12 was a French sesquiplane reconnaissance, fighter aircraft and trainer used by France, Russia, Great Britain and the United States during World War I. Later production examples were built as trainers and served widely until the late 1920s.

<span class="mw-page-title-main">Nieuport 24</span> French WW1 fighter aircraft

The Nieuport 24 was a World War I French sesquiplane fighter aircraft designed by Gustave Delage as a development of the successful Nieuport 17.

<span class="mw-page-title-main">Clerget 9B</span>

The Clerget 9B was a nine-cylinder rotary aircraft engine of the World War I era designed by Pierre Clerget. Manufactured in both France and Great Britain, it was used on such aircraft as the Sopwith Camel. The Clerget 9Bf was an increased stroke version.

<span class="mw-page-title-main">SPAD S.A</span> French WW1 fighter aircraft

The SPAD S.A was a French two-seat tractor biplane first flown in 1915. It was used by France and Russia in the early stages of the First World War in the fighter and reconnaissance roles. It was a unique aircraft that carried its observer in a nacelle ahead of wing, engine and propeller.

<span class="mw-page-title-main">Morane-Saulnier BB</span> Type of aircraft

The Morane-Saulnier BB was a military observation aircraft produced in France during World War I for use by Britain's Royal Flying Corps. It was a conventional single-bay biplane design with seating for the pilot and observer in tandem, open cockpits. The original order called for 150 aircraft powered by 110-hp Le Rhône 9J rotary engines, but shortages meant that most of the 94 aircraft eventually built were delivered with 80 hp Le Rhône 9C rotaries instead. A water-cooled Hispano-Suiza 8A engine was trialled as an alternative in the Type BH, but this remained experimental only. A production licence was sold to the Spanish company Compañía Española de Construcciones Aeronáuticas (CECA), which built twelve fitted with Hispano-Suiza engines in 1916.

<span class="mw-page-title-main">Nieuport 31</span> Type of aircraft

The Nieuport Nie 31 or Nieuport 31 was a single-engine, single-seat monoplane or sesquiplane fighter aircraft designed and built in France in 1919.

<span class="mw-page-title-main">Nieuport Madon</span> French WW1 fighter aircraft

In October 1917 Nieuport began construction of a prototype monoplane fighter known as the Nieuport Madon, a strut braced monoplane.

The Audenis C2 was a two-seat fighter biplane, designed and built in France during 1916. Probably powered by a 130 hp (97 kW) Clerget 9B 9-cylinder rotary engine, the C2 had equal span single bay biplane wings with the lower mainplane set well below the fuselage attached by the rear undercarriage struts and a pair of struts at the leading edge. The undercarriage was of conventional tailskid configuration with the mainwheel axle attached to the fuselage by V-struts. Pilot and gunner were seated in individual cockpits with the pilot under the centre-section and the gunner aft of the wings, provided with a single fixed Vickers machine-gun fired by the pilot and a machine-gun on a ring in the rear cockpit. Development of the C2 did not continue after initial flight trials.

<span class="mw-page-title-main">Courtois-Suffit Lescop CSL-1</span> 1910s French fighter aircraft

The Courtois-Suffit Lescop CSL C1 was a prototype French biplane fighter built in the final months of World War I. It was one of the first aircraft, if not the first, to be fitted with leading-edge flaps. It was not put into production.

<span class="mw-page-title-main">Nieuport 16</span> French WW1 fighter aircraft

The Nieuport 16 C.1 was a French World War I single-seat sesquiplane fighter aircraft, designed by Gustave Delage as a development of the Nieuport 11 with a more powerful engine. The Nieuport 16's service life coincided with the period when the first air-to-air rockets, the Le Prieur rocket, were used most frequently, and the type has a closer association with them than any other aircraft.

<span class="mw-page-title-main">Nieuport 17bis</span> French WW1 sesquiplane fighter aircraft used by the RNAS

The Nieuport 17bis C.1 was a World War I French single-seat sesquiplane fighter that was produced under licence in the United Kingdom in small numbers for the Royal Naval Air Service.

References

  1. Davilla & Soltan, pp. 369–370
  2. 1 2 Owers, p. 139
  3. 1 2 3 Davilla & Soltan, p. 370
  4. Owers, p. 143
  5. Herris, p. 140
  6. 1 2 Owers, p. 145
  7. Davilla & Soltan, p. 371
  8. Owers, pp. 147–148
  9. Owers, p. 150
  10. Green & Swanborough, p. 432
  11. Owers, pp. 152–153

Bibliography