| Loire-Nieuport 161 | |
|---|---|
 | |
| Role | Single-seat fighter |
| National origin | France |
| Manufacturer | Groupement Aviation Liore-Nieuport |
| Designer | Mary and E. Dieudonné |
| First flight | 5 October 1935 (Nieuport 160) |
| Number built | 3 |
The Loire-Nieuport 161 was a single-seat, single-engine, all-metal, low-wing monoplane fighter designed and built in France in 1935 to compete for a government contract. Accidents delayed its development and only three prototypes were completed.
In 1934 the Ateliers et Chantiers de la Loire and the Société Nieuport-Astra merged to form the Groupement Aviation Loire-Nieuport but maintained separate design offices, leading to some confusion about nomenclature, furthered by their nationalisation in 1936 as S.N.C.A.O. One of their first products, with the definitive final name Loire-Nieuport 161, was designed to compete for a Service Technique call for a single-seat fighter. It emerged as a mostly metal, low wing monoplane powered by a supercharged upright V-12 water-cooled engine and with a retractable conventional undercarriage. [1] [2]
The cantilever wing of the Nieuport 161, as the first prototype was titled, was built in two parts around single spars with stressed skin covering and mounted with marked dihedral. In plan it was strongly straight tapered, with square tips, carrying fabric covered, aerodynamically and statically balanced ailerons. Inboard, there were all-metal split flaps. At the rear a short, blunt fin carried a cantilever tailplane slightly above the upper fuselage line. Both fixed surfaces were straight-edged and metal-skinned like the wing; the balanced control surfaces they carried were metal-framed but fabric-covered. The rudder extended down to the keel. [1] [2]
The Nieuport's fuselage was an all-metal, elliptical cross section monocoque, with a metal skin over hoop frames and stringers. Its single-seat cockpit was behind the wing trailing edge and had a sliding multi-framed canopy which could be released in an emergency. When the first Nieuport 161 was completed, its intended engine, the 800 hp (597 kW) Hispano-Suiza 12Ycrs, was not ready so it flew with a 600 hp (447 kW) Hispano-Suiza 12Xcrs driving a two-blade, fixed-pitch propeller in October 1935. This form had the designation Nieuport 160; in March 1936 it flew as the 161 with its Ycrs engine and three-blade, variable-pitch propeller. There was a pair of shallow inboard underwing radiators. It had a conventional tailwheel undercarriage with its mainwheels mounted on single legs and retracting inwards into the wing and fuselage underside, hydraulically driven via a pair of outboard struts. The tailwheel also retracted hydraulically into the fuselage. [1] [2]
The 161 carried both cannon and machine gun armament. Type 77 60° V-12 Hispano-Suiza engines, including the 12 Ycrs model, had an integrated Hispano-Suiza HS.404 20 mm (0.79 in) cannon between the cylinder banks, firing through the hollow propeller shaft, which was raised above the crankshaft by reduction gearing. The two 7.5 mm (0.30 in) machine guns were wing mounted outside the propeller arc. [1]
Three prototypes were built and flown; the first, the Nieuport 160/1, crashed in September 1936, delaying the flight programme until the flight of the second prototype, the S.N.CA.O 161, on 15 October 1937. In April 1938 this aircraft was also lost, though by then the third prototype, definitively named Loire-Nieuport 161, had been flying for a month. Development was terminated because the competing Morane-Saulnier MS.405 had been preferred and given a pre-production order in March 1937, leaving the fourth prototype 161 uncompleted. [1]
Data from Jane's All the World's Aircraft 1938 [2]
General characteristics
Performance
Armament
The Dewoitine D.500 was an all-metal, open-cockpit, fixed-undercarriage monoplane fighter aircraft designed and produced by French aircraft manufacturer Dewoitine.
The Hispano-Suiza 12Y was an aircraft engine produced by Hispano-Suiza for the French Air Force before the Second World War. The 12Y became the primary French 1,000 hp (750 kW) class engine and was used in a number of famous aircraft, including the Morane-Saulnier M.S.406 and Dewoitine D.520.
The Blériot SPAD S.510 was a French single-seat, single-engined biplane fighter aircraft. First flying in 1933, 60 were built for the Armée de l'Air, entering service in 1936. The type remained in service as a fighter-trainer at the start of the Second World War. It was the last French biplane fighter to enter production.
The Farman F.220 and its derivatives were thick-sectioned, high-winged, four engined monoplanes from Farman Aviation Works. Based on the push-pull configuration proven by the F.211, design started in August 1925 and the first flight of the prototype was on 26 May 1932. The largest bomber to serve in France between the two world wars was the final F.222 variant. One variation was intended to be an airliner.
The Latécoère 298 was a French seaplane that served during World War II. It was designed primarily as a torpedo bomber, but served also as a dive bomber against land and naval targets, and as a maritime reconnaissance aircraft. Of a sturdy and reliable construction and possessing good manoeuvrability, it was France's most successful military seaplane, and served throughout the war in various guises.
The ANF Les Mureaux 110 and its derivatives were a family of French reconnaissance aircraft developed in the 1930s. They were all-metal, parasol-wing monoplanes that seated the pilot and observer in tandem open cockpits. The aircraft were widely used in the Battle of France, but were all scrapped soon thereafter.
The Loire 46 was a French single-seater fighter aircraft of the 1930s. A high-winged monoplane designed and built by Loire Aviation, it was purchased by the French Air Force. It was also supplied to the Spanish Republican forces during the Spanish Civil War, but was almost out of service by the outbreak of World War II.
The Loire-Nieuport LN.40 aircraft were a family of French naval dive-bombers for the Aeronavale in the late 1930s, which saw service during World War II.
The Caproni Ca.335 Maestrale (Mistral) was an Italian single-engined two-seat fighter-bomber/reconnaissance aircraft of the 1930s.
The SNCAO 200, sometimes written CAO.200, was a prototype French single seat fighter aircraft of the 1930s. It was a single engined monoplane intended to compete with the Dewoitine D.520, but was unsuccessful, only a single example being built.
The Nieuport-Delage NiD 120 series was a series of French single-seat parasol monoplane fighter aircraft of the 1930s. It was built in a number of versions, fitted with various types of engines, with six aircraft designated NiD 123 being sold to Peru.
The Romano R.90 was a prototype single-seat French floatplane fighter of the 1930s. A single example of the R.90 was built, but the type did form the basis of the Romano R.83 and Romano R.92 fighters which were built in secret for the Spanish Republicans during the Spanish Civil War.
The Loire 250 was a French single-seat fighter monoplane designed and built by Loire Aviation of St. Nazaire.
The Hispano Suiza E-30, later renamed Hispano E-30, was designed in Spain in 1930 as a multi-purpose intermediate trainer. It was a single engine, parasol wing monoplane. About 25 served with the Spanish armed forces until 1945.
The Bernard 260 C1 was a French all-metal, single-engine, low-wing monoplane with an open cockpit and fixed undercarriage, designed to a government single-seat fighter specification issued in 1930. After extensive comparative tests the Dewoitine D.500 was ordered in preference, though the performances of the two aircraft were similar.
The Arsenal-Delanne 10 was an experimental fighter aircraft of French origin. The plane had a rear cockpit and a distinctive tandem wing.
The Nieuport-Delage NiD 37 was a single-engine, single-seat monoplane fighter aircraft and racer designed and built in France in the early 1920s. It had a small foreplane to bring the centre of pressure forward. Heavy, slower than expected and with turbo-supercharger problems, development ended without any entering service.
The Wibault Wib 1, Wib C1 or, later, Wib 1 C1 was a French World War I single seat, single engine fighter aircraft prototype. Flown near the end of the war, it was not selected for production.
The Wibault Wib 210 C.1 was a single engine, single seat low wing monoplane fighter aircraft, designed and built in France in the late 1920s. Flight tests revealed vibration problems and development was quickly abandoned.
The Blériot-SPAD S.91 was a French light-weight fighter aircraft. It would be later developed into the Blériot-SPAD S.510, the last biplane produced by the French aeronautic industries.
