Stolp SA 750 Acroduster Too | |
---|---|
Role | Homebuilt aerobatic biplane |
National origin | United States of America |
Manufacturer | Stolp Starduster Corporation Aircraft Spruce & Specialty |
Designer | Lou Stolp, Morgan Schrack |
Introduction | 1971 |
Status | Plans available (2012) |
Developed from | Stolp Acroduster I |
The Stolp SA 750 Acroduster Too is an American two place homebuilt aerobatic biplane, stressed to plus or minus 9g. The aircraft was introduced in 1971 and is supplied in the form of plans and some parts for amateur construction by Aircraft Spruce & Specialty. [1] [2]
The Acroduster Too is a scaled down version of the Stolp Starduster Too. [3] It was originally named the Schrack-Stolp Super Starduster Too. [4] Much of the redesign of the SA-300 was done by TWA pilot Morgan Schrack. [5]
The aerobatic aircraft is described as having a sharp stall, and ability to keep wings level using rudder alone. The Acroduster has shorter span and length, has larger ailerons than the Starduster Too, and has a stronger tail.[ citation needed ]
The aircraft is constructed with fabric covered 4130 steel tube structure and spruce wing spars. Ribs are plywood with cap strips. [1]
Data fromAircraft Spruce.
General characteristics
Performance
Aircraft of comparable role, configuration, and era
Related lists
The Acro II is a two-seat aerobatic sportsplane designed by US aviation enthusiast Paul Poberezny in the 1970s for amateur construction. It is an enlarged version of his previous Acro Sport I, sized up to carry two persons. Plans are available through Acro Sport in Wisconsin and material kits are supplied by Aircraft Spruce and Specialty.
The Yakovlev Yak-55 is a single-seat aerobatic aircraft. Pilots flying the Yak-55 have won several world aerobatic championships.
The AS/SA 202 Bravo is a two to three-seat civil light aircraft jointly designed and manufactured by the Swiss company Flug- und Fahrzeugwerke Altenrhein (FFA) and the Italian company Savoia-Marchetti. The aircraft was designated the AS 202 in Switzerland, and the SA 202 in Italy.
The Christen Eagle, which later became the Aviat Eagle in the mid-1990s, is an aerobatic sporting biplane aircraft that has been produced in the United States since the late 1970s.
The Parsons-Jocelyn PJ-260 was an aerobatic biplane aircraft built in the United States to participate in the 1962 World Aerobatic Championships in Budapest. It served as the prototype for a family of closely related aircraft produced under designer Nick D'Apuzzo's name as the D-260 and D-295 Senior Aero Sport', D-200 Junior Aero Sport and the D-201 Sportwing which were marketed for homebuilding. The original PJ-260 was named for the pilots who commissioned the aircraft and hoped to compete with it, Lindsey Parsons and Rod Jocelyn. The PJ-260 and its derivatives were conventional short-coupled biplanes with fixed tailwheel undercarriage. The single-bay, equal-span wings were staggered and braced with N-struts, and the outer panels of the upper wing were swept back. The fuselage construction was of fabric over a steel-tube framework, and the wings were of fabric-covered wooden spars and metal ribs.
The Fournier RF 4 is a single-seater motor glider designed by René Fournier in 1966. It is an aerobatic version of the Fournier RF 3.
The MXS is a single-seat aerobatic aircraft made of carbon fiber and built by MX Aircraft Company, a manufacturer located at Jandakot Airport in Perth, Western Australia. The MXS-R is a race variant flown by several pilots in the Red Bull Air Race World Championship. The planes are all-composite in construction, piston-powered, low-wing monoplanes. They are produced both in kit form for amateur construction, and completed ready to fly at the factory.
The Fisher FP-404 is a Canadian single-seat, conventional landing gear, single-engined biplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.
The Fisher Celebrity is a Canadian two-seat, conventional landing gear, single engined, biplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, United States but the company is now located in Dorchester, Ontario, Canada.
The Acroduster I SA700 is an American single-seat homebuilt aerobatic biplane.
The Lemberger LD20b was a single-engine cantilever biplane designed to be easily towable behind a car. Built in Germany in 1971, it made several flights but did not enter production.
The Stolp Starduster Too SA300 is a two-seat, conventional landing gear equipped homebuilt biplane. Aircraft Spruce & Specialty Co currently holds rights to sell plans for the aircraft.
The Stolp-Adams SA-100 Starduster is a U.S. single seat sport biplane designed to be built from plans supplied by Aircraft Spruce & Specialty Co. Though the first flight was in 1957, Stardusters continue to be built and flown.
The Shober Willie II is an American two-seat sporting or aerobatic aircraft designed and built by Shober Aircraft Enterprises. The aircraft was designed to be sold as plans for amateur construction.
The Howland H-2 Honey Bee is an American homebuilt aircraft that was designed by Bert Howland and made available by Howland Aero Design in the form of plans for amateur construction, with kits provided by Aircraft Spruce & Specialty Co. The H-2 first flew in 1986.
The Peña Bilouis is a French aerobatic amateur-built aircraft that was designed by the competitive aerobatic pilot Louis Peña of Dax, Landes and made available in the form of plans for amateur construction.
The Scoville Stardust JS-2 is a homebuilt aircraft designed for air racing.
The Skipper Scrappy UAC-200 is an American homebuilt aerobatic biplane that was designed by WA Skipper of Greeley, Colorado, introduced in 1970. The aircraft was supplied in the form of plans for amateur construction, but plans seem to no longer be available.
The Stolp SA-900 V-Star is an American aerobatic homebuilt biplane, currently produced by Aircraft Spruce & Specialty Co in the form of plans for amateur construction. In the 1990s it was also available as a kit from Stolp Starduster Corporation of Riverside, California.
The Vancil Spitz S1 is an American homebuilt aircraft that was designed and produced by A. Vancil of Belton, South Carolina, introduced in the late 1990s. When it was available the aircraft was supplied as a kit and also in the form of plans for amateur construction.
Wikimedia Commons has media related to Stolp Acroduster Too . |
{{cite journal}}
: Missing or empty |title=
(help)