Two-Seater | |
---|---|
Role | Powered parachute |
National origin | Canada |
Manufacturer | Sundog Powerchutes Inc |
Status | Production completed (2014) |
Produced | 2002-2014 |
Number built | At least six |
Variants | Sundog One-Seater |
The Sundog Two-Seater is a Canadian powered parachute that was designed and produced by Sundog Powerchutes of Sparwood, British Columbia and later Pierceland, Saskatchewan. Now out of production, when it was available the aircraft was supplied as a complete ready-to-fly-aircraft. [1] [2] [3]
The aircraft was introduced in 2002 and production ended when the company went out of business in 2014. [4]
The Two-Seater was designed to comply with the Canadian Basic Ultra-Light Aeroplane rules, but also fit the Fédération Aéronautique Internationale microlight category, including the category's maximum gross weight of 450 kg (992 lb). The aircraft has a maximum gross weight of 374 kg (825 lb). It features a 500 sq ft (46 m2) Apco 500 parachute-style wing, two-seats-in-side-by-side configuration, tricycle landing gear and a single 64 hp (48 kW) Rotax 582 two-stroke engine in pusher configuration. The 60 hp (45 kW) HKS 700E four-stroke engine was a factory option. [1] [2]
The aircraft carriage is built from bolted 6061-T6 aluminium, stainless steel fittings and aircraft bolts. In flight steering is accomplished via foot pedals that actuate the canopy brakes, creating roll and yaw. On the ground the aircraft has lever-controlled nosewheel steering. The main landing gear incorporates spring rod suspension. The occupants are protected by a series of circular aluminium tubes in the event of a roll-over. [1] [2]
The aircraft has an empty weight of 336 lb (152 kg) and a gross weight of 825 lb (374 kg), giving a useful load of 489 lb (222 kg). With full fuel of 10 U.S. gallons (38 L; 8.3 imp gal) the payload for crew and baggage is 429 lb (195 kg). [1] [2]
The company also supplied custom trailers for towing the aircraft behind an automobile. [2]
In September 2015 three examples were registered with Transport Canada and three were registered in the United States with the Federal Aviation Administration. [5] [6]
Reviewing the aircraft in 2003 Jean-Pierre le Camus said, "this side by side Canadian machine has a lot of character". [1]
Data from Bertrand and manufacturer [1] [2]
General characteristics
Performance
The Aero Designs Pulsar is an American two-seat, low wing, ultralight and homebuilt aircraft that was designed by Mark Brown and first produced by Aero Designs of San Antonio, Texas, introduced in 1985. When it was available the Pulsar was supplied as a ready-to-fly aircraft and as a kitplane for amateur construction.
The Paraplane WD-1 Wind Dancer is an American powered parachute that was designed and produced by Paraplane International of Medford, New Jersey. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.
The Parascender I, originally just called the Parascender, is an American single-seat powered parachute that was designed and produced by Parascender Technologies of Kissimmee, Florida and introduced in 1989. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.
The Parascender II is an American powered parachute that was designed and produced by Parascender Technologies of Kissimmee, Florida. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.
The Six Chuter Skye Ryder Aerochute is an American powered parachute that was designed and produced by Six Chuter of Yakima, Washington. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.
The Aerochute International Dual, is an Australian powered parachute designed and produced by Aerochute International of Coburg North, Victoria. The aircraft is supplied as a kit for amateur construction.
The Air Sylphe 447 is a French powered parachute that was designed and produced by Air Sylphe of Villereau, Nord. Now out of production, when it was available, the aircraft was supplied as a complete ready-to-fly-aircraft.
The Bilsam Sky Walker II is a Polish powered parachute designed and produced by Bilsam Aviation of Poznań. The aircraft is supplied as a complete ready-to-fly-aircraft.
The Gemini Twin is an American powered parachute that was designed and produced by Gemini Powered Parachutes of Culver, Indiana. Now out of production, when it was available the aircraft was supplied as a complete ready-to-fly-aircraft.
The Kolb Flyer Powered Parachute is an American powered parachute that was designed and produced by New Kolb Aircraft of London, Kentucky. Now out of production, when it was available the aircraft was supplied as a complete ready-to-fly-aircraft.
The New Powerchutes Gemini is a South African powered parachute that was designed and produced by New PowerChutes of Alberton, Gauteng. Now out of production, when it was available the aircraft was supplied as a complete ready-to-fly-aircraft.
The Para-Ski Top Gun is a Canadian powered parachute that was designed and produced by Para-Ski of Mascouche, Quebec. Now out of production, when it was available the aircraft was supplied as a complete ready-to-fly-aircraft and also as a kit for amateur construction.
The Skymaster Excel is an American powered parachute that was designed and produced by Skymaster Powered Parachutes of Hartland, Wisconsin. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.
The Soaring Concepts Sky Trek is an American powered parachute, designed and produced by Soaring Concepts Inc of Sturgis, Michigan and introduced in 2000. The aircraft is supplied as a complete ready-to-fly-aircraft or as a kit for amateur construction.
The Sun Flightcraft Air-Chopper is an Austrian powered parachute that was designed by Herbert Hofbauer and produced by Sun Flightcraft of Innsbruck. Now out of production, when it was available the aircraft was supplied complete and ready-to-fly.
The Sundog One-Seater is a Canadian powered parachute that was designed and produced by Sundog Powerchutes of Sparwood, British Columbia and later Pierceland, Saskatchewan. Now out of production, when it was available the aircraft was supplied as a complete ready-to-fly-aircraft.
The Viking Aircraft Viking II is an American powered parachute designed and produced by Viking Aircraft Inc of Panama City Beach, Florida; part of the Viking-series. Now out of production, when it was available the aircraft was supplied complete and ready-to-fly.
The BDC Aero Puma is a Canadian ultralight and light-sport aircraft, originally designed by the Italian aircraft designer Antonio Bortolanza and built by Aeroplast of Sale, Piedmont, Italy. It is currently produced by BDC Aero Industrie of Lachute, Quebec. At one time available as a kit for amateur construction, now the aircraft is supplied only as a complete ready-to-fly-aircraft.
The Heli-Sport CH77 Ranabot is an Italian helicopter designed and produced by Heli-Sport of Turin. The aircraft is supplied as a kit for amateur construction.
The CBB O2 is a family of French ultralight trikes, designed by Bruno Bouron and produced by CBB ULM of Montreuil-Bellay. The aircraft is supplied complete and ready to fly.