 | This article contains content that is written like an advertisement .(April 2013) |
SureSmile is a type of customized orthodontic arch wires used by orthodontists to straighten teeth. The technique utilizes 3-D imaging, treatment planning software and a robot to create the wires. The technique is reported to decrease the time required to complete orthodontic treatment by 34% and increase the precision of the results. [1]
The orthodontist uses digital images of a patient's mouth and teeth from either a white light scanner or cone beam computed tomography (CBCT). The software takes the teeth and individually aligns them to the proper position. [2]
Once the orthodontist has virtually designed the smile and bite, the SureSmile software plans a route for moving the teeth into the proper place and sends this information to a robot that bends and shapes the wires to the patient's configurations. The customized wire is then sent back to the orthodontist to be placed on the patient.
SureSmile has a lingual or behind teeth braces option called SureSmile QT. With lingual braces, brackets are adhered to the underside of the teeth on the top arch, bottom arch or both arches. Most patients choose lingual braces for aesthetic reasons, as they cannot be seen. Orthodontists that offer lingual braces will often suggest putting lingual braces on the upper teeth and clear ceramic braces on the bottom though patients can choose to have lingual braces on both arches.
The SureSmile technology was developed and is owned by OraMetrix, a company founded in 1998 by Friedrich (Fritz) Riemeier [3] and Dr. Rohit Sachdeva, [4] through the merger of two medical technology companies, one U.S. based and the other, German. The company was launched globally in 1999 with the help of a $150,000 investment from STARTech Early Ventures LLC. Other key investors include Brentwood Venture Capital, CenterPoint Ventures, Rho Ventures and STAR Ventures.
The SureSmile System received 510(k) marketing clearance from the U.S. Food and Drug Administration (FDA) in November 2000. In 2003, OraMetrix relocated its U.S. corporate headquarters from Dallas to a larger, 25,000-square-foot facility in Richardson, Texas.
Orthodontics is a dentistry specialty that addresses the diagnosis, prevention, management, and correction of mal-positioned teeth and jaws, as well as misaligned bite patterns. It may also address the modification of facial growth, known as dentofacial orthopedics.
Orthodontic retainers are custom-made devices, usually made of wires or clear plastic, that hold teeth in position after surgery or any method of realigning teeth. Once a phase of orthodontic treatment has been completed to straighten teeth, there remains a lifelong risk of relapse due to a number of factors: recoil of periodontal fibres, pressure from surrounding soft tissues, the occlusion and patient’s continued growth and development. By using retainers to hold the teeth in their new position for a length of time, the surrounding periodontal fibres adapt to changes in the bone which can help minimize any changes to the final tooth position after the completion of orthodontic treatment. Retainers may also be used to treat overjets.
Dental braces are devices used in orthodontics that align and straighten teeth and help position them with regard to a person's bite, while also aiming to improve dental health. They are often used to correct underbites, as well as malocclusions, overbites, open bites, gaps, deep bites, cross bites, crooked teeth, and various other flaws of the teeth and jaw. Braces can be either cosmetic or structural. Dental braces are often used in conjunction with other orthodontic appliances to help widen the palate or jaws and to otherwise assist in shaping the teeth and jaws.
Clear aligners are orthodontic devices that are a transparent, plastic form of dental braces used to adjust teeth.
Orthodontic headgear is a type of orthodontic appliance typically attached to the patient's head with a strap or number of straps around the patient's head or neck. From this, a force is transferred to the mouth/jaw(s) of the subject.
An archwire in orthodontics is a wire conforming to the alveolar or dental arch that can be used with dental braces as a source of force in correcting irregularities in the position of the teeth. An archwire can also be used to maintain existing dental positions; in this case it has a retentive purpose.
A palatal expander is a device in the field of orthodontics which is used to widen the upper jaw (maxilla) so that the bottom and upper teeth will fit together better. This is a common orthodontic procedure. The use of an expander is most common in children and adolescents 8–18 years of age. It can also be used in adults, although expansion is more uncomfortable and takes longer in adults. A patient who would rather not wait several months for the end result achieved by a palatal expander may be able to opt for a surgical separation of the maxilla. Use of a palatal expander is most often followed by braces to then straighten the teeth.
Orthodontic technology is a specialty of dental technology that is concerned with the design and fabrication of dental appliances for the treatment of malocclusions, which may be a result of tooth irregularity, disproportionate jaw relationships, or both.
Jaw wiring is a medical procedure to keep the jaw closed for a period of time. Originally, it was used as the mandibular equivalent of a cast, to fix the jaw in place while a fracture healed. Jaw wiring is also used for weight-loss purposes, to prevent the ingestion of solid food.
Crossbite is a form of malocclusion where a tooth has a more buccal or lingual position than its corresponding antagonist tooth in the upper or lower dental arch. In other words, crossbite is a lateral misalignment of the dental arches.
Percival Raymond Begg AO was a professor at the University of Adelaide School of Dentistry and a well known orthodontist, famous for developing the "Begg technique". Permanent displays dedicated to the Begg technique can be found in the Smithsonian Institution in Washington DC, the Library of the American Dental Association in Chicago, and the PR Begg Museum at the University of Adelaide.
Pre-eruption guidance is an orthodontic treatment method that allows for expansion of existing erupting teeth long before they appear in the mouth. The use off pre-eruption guidance appliances and the timing of extractions of certain deciduous teeth aligns the teeth naturally as opposed to orthodontic mechanical movement of permanent teeth into alignment after they have erupted. Research shows that pre-eruption guidance produces far more stable tooth alignment than alternative treatments.
Lingual braces are one of the many types of the fixed orthodontic treatment appliances available to patients needing orthodontics. They involve attaching the orthodontic brackets on the inner sides of the teeth. The main advantage of lingual braces is their near invisibility compared to the standard braces, which are attached on the buccal (cheek) sides of the tooth. Lingual braces were invented by Craven Kurz in 1976.
Charles J. Burstone was an American orthodontist who was notable for his contributions to biomechanics and force-systems in the field of orthodontics. He was well known for co-development of new orthodontic material such as beta titanium, nickel titanium, and long fiber-reinforced composite. He wrote more than 200 articles in scientific fields.
Charles Henry Tweed was an American orthodontist known for many of his contributions to the field of orthodontics. He was a founder of the Charles H. Tweed Foundation for Orthodontic Research. Tweed a student of Edward Angle in Pasadena, California and a classmate of Raymond Begg.
Harold Dean Kesling was an American orthodontist who is known for developing the tooth positioning appliance called "Positioner". This appliance is used in orthodontics at the end of treatment to allow teeth to settle in occlusion.
Craven Kurz was an American orthodontist who is known to be the inventor of the lingual braces in 1975. He was also the founding president of the American Lingual Orthodontic Association.
Frankel appliance or Frankel Functional Regulator is an orthodontic functional appliance which was developed by Rolf Fränkel in 1950s for treatment to patients of all ages. This appliance primarily focused on the modulation of neuromuscular activity in order to produce changes in jaw and teeth. The appliance was opposite to the Bionator appliance and Activator appliance.
Intrusion is a movement in the field of orthodontics where a tooth is moved partially into the bone. Intrusion is done in orthodontics to correct an anterior deep bite or in some cases intrusion of the over-erupted posterior teeth with no opposing tooth. Intrusion can be done in many ways and consists of many different types. Intrusion, in orthodontic history, was initially defined as problematic in early 1900s and was known to cause periodontal effects such as root resorption and recession. However, in mid 1950s successful intrusion with light continuous forces was demonstrated. Charles J. Burstone defined intrusion to be "the apical movement of the geometric center of the root (centroid) in respect to the occlusal plane or plane based on the long axis of tooth".
Align Technology, Inc. is an American manufacturer of 3D digital scanners and Invisalign clear aligners used in orthodontics. It was founded in 1997 and is headquartered in Tempe, Arizona. The company manufactures the aligners in Juarez, Mexico, and its scanners in Israel and China. The company is best known for its Invisalign system, which is a clear aligner treatment used to straighten teeth.