Surface phonon

Last updated December 08, 2023

In solid state physics, a surface phonon is the quantum of a lattice vibration mode associated with a solid surface. Similar to the ordinary lattice vibrations in a bulk solid (whose quanta are simply called phonons), the nature of surface vibrations depends on details of periodicity and symmetry of a crystal structure. Surface vibrations are however distinct from the bulk vibrations, as they arise from the abrupt termination of a crystal structure at the surface of a solid. Knowledge of surface phonon dispersion gives important information related to the amount of surface relaxation, the existence and distance between an adsorbate and the surface, and information regarding presence, quantity, and type of defects existing on the surface.^[1]

In modern semiconductor research, surface vibrations are of interest as they can couple with electrons and thereby affect the electrical and optical properties of semiconductor devices. They are most relevant for devices where the electronic active area is near a surface, as is the case in two-dimensional electron systems and in quantum dots. As a specific example, the decreasing size of CdSe quantum dots was found to result in increasing frequency of the surface vibration resonance, which can couple with electrons and affect their properties.^[2]

Two methods are used for modeling surface phonons. One is the "slab method", which approaches the problem using lattice dynamics for a solid with parallel surfaces,^[3] and the other is based on Green's functions. Which of these approaches is employed is based upon what type of information is required from the computation. For broad surface phonon phenomena, the conventional lattice dynamics method can be used; for the study of lattice defects, resonances, or phonon state density, the Green's function method yields more useful results.^[4]

Quantum description

Surface phonons are represented by a wave vector along the surface, q, and an energy corresponding to a particular vibrational mode frequency, ω. The surface Brillouin zone (SBZ) for phonons consists of two dimensions, rather than three for bulk. For example, the face-centered cubic (100) surface is described by the directions ΓX and ΓM, referring to the [110] direction and [100] direction, respectively.^[3]

The description of the atomic displacements by the harmonic approximation assumes that the force on an atom is a function of its displacement with respect to neighboring atoms, i.e. Hooke's law holds.^[5] Higher order anharmonicity terms can be accounted by using perturbative methods.^[6]

The positions are then given by the relation

m_{i}{\ddot {u}}_{i\alpha }=-\sum _{j,\beta }\phi _{i\alpha ,j\beta }u_{j,\beta }

where i is the place where the atom would sit if it were in equilibrium, m_i is the mass of the atom that should sit at i, α is the direction of its displacement, u_i,α is the amount of displacement of the atom from i, and $\phi _{i\alpha ,j\beta }$ are the force constants which come from the crystal potential.^[1]

The solution to this gives the atomic displacement due to the phonon, which is given by

u_{\ell ,m,\kappa ,\alpha }={\sqrt {(m_{\kappa })}}v_{\ell ,\kappa ,\alpha }(\omega ,q)e^{i[\omega t-qx(\ell ,m)]}

where the atomic position i is described by l, m, and κ, which represent the specific atomic layer, l, the particular unit cell it is in, m, and the position of the atom with respect to its own unit cell, κ. The term x(l,m) is the position of the unit cell with respect to some chosen origin.^[1]

Normal modes of vibration and types of surfaces phonons

Phonons can be labeled by the manner in which the vibrations occur. If the vibration occurs lengthwise in the direction of the wave and involves contraction and relaxation of the lattice, the phonon is called a "longitudinal phonon". Alternatively, the atoms may vibrate side-to-side, perpendicular to wave propagation direction; this is known as a "transverse phonon”. In general, transverse vibrations tend to have smaller frequencies than longitudinal vibrations.^[5]

The wavelength of the vibration also lends itself to a second label. "Acoustic" branch phonons have a wavelength of vibration that is much bigger than the atomic separation so that the wave travels in the same manner as a sound wave; "optical" phonons can be excited by optical radiation in the infrared wavelength or longer.^[5] Phonons take on both labels such that transverse acoustic and optical phonons are denoted TA and TO, respectively; likewise, longitudinal acoustic and optical phonons are denoted LA and LO.

The type of surface phonon can be characterized by its dispersion in relation to the bulk phonon modes of the crystal. Surface phonon mode branches may occur in specific parts of the SBZ or encompass it entirely across.^[1] These modes can show up both in the bulk phonon dispersion bands as what is known as a resonance or outside these bands as a pure surface phonon mode.^[4] Thus surface phonons can be purely surface existing vibrations, or simply the expression of bulk vibrations in the presence of a surface, known as a surface-excess property.^[3]

A particular mode, the Rayleigh phonon mode, exists across the entire BZ and is known by special characteristics, including a linear frequency versus wave number relation near the SBZ center.^[1]

Experiment

Two of the more common methods for studying surface phonons are electron energy loss spectroscopy and helium atom scattering.

Electron energy loss spectroscopy

The technique of electron energy loss spectroscopy (EELS) is based upon the fact that electron energy decreases upon interaction with matter. Since the interaction of low energy electrons is mainly in the surface, the loss is due to surface phonon scattering, which have an energy range of 10⁻³ eV to 1 eV.^[7]

In EELS, an electron of known energy is incident upon the crystal, a phonon of some wave number, q, and frequency, ω, is then created, and the outgoing electron's energy and wave number are measured.^[1] If the incident electron energy, E_i, and wave number, k_i, are chosen for the experiment and the scattered electron energy, E_s, and wave number, k_s, are known by measurement, as well as the angles with respect to the normal for the incident and scattered electrons, θ_i and θ_s, then values of q throughout the BZ can be obtained.^[1] Energy and momentum for the electron have the following relation,

E={\frac {\hbar ^{2}k^{2}}{2m}}

where m is the mass of an electron. Energy and momentum must be conserved, so the following relations must be true of the energy and momentum exchange throughout the encounter:

\Delta E=|E_{i}-E_{s}|=\hbar \omega

\Delta K=k_{i}(\sin \theta _{i})-k_{s}(\sin \theta _{s})=\mathbf {G} +\mathbf {q}

where G is a reciprocal lattice vector that ensures that q falls in the first BZ and the angles θ_i and θ_s are measured with respect to the normal to the surface.^[4]

The dispersion is often shown with q given in units of cm⁻¹, in which 100 cm⁻¹ = 12.41 meV.^[7] The electron incident angles for most EELS phonon study chambers can range from 135-θ_s and 90-θ_f for θ_f ranging between 55° and 65°.^[4]–

Helium atom scattering

Helium is the best suited atom to be used for surface scattering techniques, as it has a low enough mass that multiple phonon scattering events are unlikely, and its closed valence electron shell makes it inert, unlikely to bond with the surface upon which it impinges. In particular, ⁴He is used because this isotope allows for very precise velocity control, important for obtaining maximum resolution in the experiment.^[4]

There are two main techniques used for helium atom scattering studies. One is a so-called time-of-flight measurement which consists of sending pulses of He atoms at the crystal surface and then measuring the scattered atoms after the pulse. The He beam velocity ranges from 644 to 2037 m/s. The other involves measuring the momentum of the scattered He atoms by a LiF grating monochromator.^[4]

It is important to note that the He nozzle beam source used in many He scattering experiments poses some risk of error, as it adds components to the velocity distributions that can mimic phonon peaks; particularly in time-of-flight measurements, these peaks can look very much like inelastic phonon peaks. Thus, these false peaks have come to be known by the names "deceptons" or "phonions".^[4]

Comparison of techniques

EELS and helium scattering techniques each have their own particular merits that warrant the use of either depending on the sample type, resolution desired, etc. Helium scattering has a higher resolution than EELS, with a resolution of 0.5–1 meV compared to 7 meV. However, He scattering is available only for energy differences, E_i−E_s, of less than about 30 meV, while EELS can be used for up to 500 meV.^[4]

During He scattering, the He atom does not actually penetrate into the material, being scattered only once at the surface; in EELS, the electron can go as deep as a few monolayers, scattering more than once during the course of the interaction.^[4] Thus, the resulting data is easier to understand and analyze for He atom scattering than for EELS, since there are no multiple collisions to account for.

He beams have a capabilities of delivering a beam of higher flux than electrons in EELS, but the detection of electrons is easier than the detection of He atoms. He scattering is also more sensitive to very low frequency vibrations, on the order of 1 meV.^[4] This is the reason for its high resolution in comparison to EELS.

Related Research Articles

The thermal conductivity of a material is a measure of its ability to conduct heat. It is commonly denoted by $,, or and is measured in W\cdotm -1 \cdotK -1 .$

In physics, a phonon is a collective excitation in a periodic, elastic arrangement of atoms or molecules in condensed matter, specifically in solids and some liquids. A type of quasiparticle, a phonon is an excited state in the quantum mechanical quantization of the modes of vibrations for elastic structures of interacting particles. Phonons can be thought of as quantized sound waves, similar to photons as quantized light waves. However, photons are fundamental particles that can be individually detected, whereas phonons, being quasiparticles, are an emergent phenomenon.

<span class="mw-page-title-main">Debye model</span> Method in physics

In thermodynamics and solid-state physics, the Debye model is a method developed by Peter Debye in 1912 for estimating the phonon contribution to the specific heat in a solid. It treats the vibrations of the atomic lattice (heat) as phonons in a box, in contrast to the Einstein photoelectron model, which treats the solid as many individual, non-interacting quantum harmonic oscillators. The Debye model correctly predicts the low-temperature dependence of the heat capacity of solids, which is proportional to $- the Debye T 3 law . Similarly to the Einstein photoelectron model, it recovers the Dulong-Petit law at high temperatures. Due to simplifying assumptions, its accuracy suffers at intermediate temperatures.$

<span class="mw-page-title-main">Polaron</span> Quasiparticle in condensed matter physics

A polaron is a quasiparticle used in condensed matter physics to understand the interactions between electrons and atoms in a solid material. The polaron concept was proposed by Lev Landau in 1933 and Solomon Pekar in 1946 to describe an electron moving in a dielectric crystal where the atoms displace from their equilibrium positions to effectively screen the charge of an electron, known as a phonon cloud. This lowers the electron mobility and increases the electron's effective mass.

In solid-state physics, the electron mobility characterises how quickly an electron can move through a metal or semiconductor when pulled by an electric field. There is an analogous quantity for holes, called hole mobility. The term carrier mobility refers in general to both electron and hole mobility.

<span class="mw-page-title-main">Dispersion relation</span> Relation of wavelength/wavenumber as a function of a waves frequency

In the physical sciences and electrical engineering, dispersion relations describe the effect of dispersion on the properties of waves in a medium. A dispersion relation relates the wavelength or wavenumber of a wave to its frequency. Given the dispersion relation, one can calculate the frequency-dependent phase velocity and group velocity of each sinusoidal component of a wave in the medium, as a function of frequency. In addition to the geometry-dependent and material-dependent dispersion relations, the overarching Kramers–Kronig relations describe the frequency-dependence of wave propagation and attenuation.

High resolution electron energy loss spectroscopy (HREELS) is a tool used in surface science. The inelastic scattering of electrons from surfaces is utilized to study electronic excitations or vibrational modes of the surface of a material or of molecules adsorbed to a surface. In contrast to other electron energy loss spectroscopies (EELS), HREELS deals with small energy losses in the range of 10⁻³ eV to 1 eV. It plays an important role in the investigation of surface structure, catalysis, dispersion of surface phonons and the monitoring of epitaxial growth.

In condensed matter physics, a spin wave is a propagating disturbance in the ordering of a magnetic material. These low-lying collective excitations occur in magnetic lattices with continuous symmetry. From the equivalent quasiparticle point of view, spin waves are known as magnons, which are bosonic modes of the spin lattice that correspond roughly to the phonon excitations of the nuclear lattice. As temperature is increased, the thermal excitation of spin waves reduces a ferromagnet's spontaneous magnetization. The energies of spin waves are typically only $μeV$ in keeping with typical Curie points at room temperature and below.

Surface states are electronic states found at the surface of materials. They are formed due to the sharp transition from solid material that ends with a surface and are found only at the atom layers closest to the surface. The termination of a material with a surface leads to a change of the electronic band structure from the bulk material to the vacuum. In the weakened potential at the surface, new electronic states can be formed, so called surface states.

Helium atom scattering (HAS) is a surface analysis technique used in materials science. It provides information about the surface structure and lattice dynamics of a material by measuring the diffracted atoms from a monochromatic helium beam incident on the sample.

Defect types include atom vacancies, adatoms, steps, and kinks that occur most frequently at surfaces due to the finite material size causing crystal discontinuity. What all types of defects have in common, whether surface or bulk defects, is that they produce dangling bonds that have specific electron energy levels different from those of the bulk. This difference occurs because these states cannot be described with periodic Bloch waves due to the change in electron potential energy caused by the missing ion cores just outside the surface. Hence, these are localized states that require separate solutions to the Schrödinger equation so that electron energies can be properly described. The break in periodicity results in a decrease in conductivity due to defect scattering.

Interfacial thermal resistance, also known as thermal boundary resistance, or Kapitza resistance, is a measure of resistance to thermal flow at the interface between two materials. While these terms may be used interchangeably, Kapitza resistance technically refers to an atomically perfect, flat interface whereas thermal boundary resistance is a more broad term. This thermal resistance differs from contact resistance because it exists even at atomically perfect interfaces. Owing to differences in electronic and vibrational properties in different materials, when an energy carrier attempts to traverse the interface, it will scatter at the interface. The probability of transmission after scattering will depend on the available energy states on side 1 and side 2 of the interface.

Phonons can scatter through several mechanisms as they travel through the material. These scattering mechanisms are: Umklapp phonon-phonon scattering, phonon-impurity scattering, phonon-electron scattering, and phonon-boundary scattering. Each scattering mechanism can be characterised by a relaxation rate 1/ $which is the inverse of the corresponding relaxation time.$

The Monte Carlo method for electron transport is a semiclassical Monte Carlo (MC) approach of modeling semiconductor transport. Assuming the carrier motion consists of free flights interrupted by scattering mechanisms, a computer is utilized to simulate the trajectories of particles as they move across the device under the influence of an electric field using classical mechanics. The scattering events and the duration of particle flight is determined through the use of random numbers.

In condensed matter physics, the Lyddane–Sachs–Teller relation determines the ratio of the natural frequency of longitudinal optic lattice vibrations (phonons) of an ionic crystal to the natural frequency of the transverse optical lattice vibration for long wavelengths. The ratio is that of the static permittivity $to the permittivity for frequencies in the visible range .$

Heat transfer physics describes the kinetics of energy storage, transport, and energy transformation by principal energy carriers: phonons, electrons, fluid particles, and photons. Heat is energy stored in temperature-dependent motion of particles including electrons, atomic nuclei, individual atoms, and molecules. Heat is transferred to and from matter by the principal energy carriers. The state of energy stored within matter, or transported by the carriers, is described by a combination of classical and quantum statistical mechanics. The energy is different made (converted) among various carriers. The heat transfer processes are governed by the rates at which various related physical phenomena occur, such as the rate of particle collisions in classical mechanics. These various states and kinetics determine the heat transfer, i.e., the net rate of energy storage or transport. Governing these process from the atomic level to macroscale are the laws of thermodynamics, including conservation of energy.

Brillouin spectroscopy is an empirical spectroscopy technique which allows the determination of elastic moduli of materials. The technique uses inelastic scattering of light when it encounters acoustic phonons in a crystal, a process known as Brillouin scattering, to determine phonon energies and therefore interatomic potentials of a material. The scattering occurs when an electromagnetic wave interacts with a density wave, photon-phonon scattering.

Cavity optomechanics is a branch of physics which focuses on the interaction between light and mechanical objects on low-energy scales. It is a cross field of optics, quantum optics, solid-state physics and materials science. The motivation for research on cavity optomechanics comes from fundamental effects of quantum theory and gravity, as well as technological applications.

A phonovoltaic (pV) cell converts vibrational (phonons) energy into a direct current much like the photovoltaic effect in a photovoltaic (PV) cell converts light (photon) into power. That is, it uses a p-n junction to separate the electrons and holes generated as valence electrons absorb optical phonons more energetic than the band gap, and then collects them in the metallic contacts for use in a circuit. The pV cell is an application of heat transfer physics and competes with other thermal energy harvesting devices like the thermoelectric generator.

<span class="mw-page-title-main">Phonon polariton</span> Quasiparticle form phonon and photon coupling

In condensed matter physics, a phonon polariton is a type of quasiparticle that can form in a diatomic ionic crystal due to coupling of transverse optical phonons and photons. They are particular type of polariton, which behave like bosons. Phonon polaritons occur in the region where the wavelength and energy of phonons and photons are similar, as to adhere to the avoided crossing principle.

References

1 2 3 4 5 6 7 J. Szeftel, "Surface phonon dispersion, using electron energy loss spectroscopy," Surface Science, 152/153 (1985) 797–810, doi : 10.1016/0039-6028(85)90490-X
↑ Y.-N. Hwang and S.-H. Park, "Size-dependent surface phonon mode of CdSe quantum dots," Physical Review B59, 7285–7288 (1999), doi : 10.1103/PhysRevB.59.7285
1 2 3 W. Kress and F. W. de Wette, "Study of surface phonons by the slab method," Surface Phonons, Springer-Verlag, Berlin Heidelberg (1991)
1 2 3 4 5 6 7 8 9 10 J. P. Toennies, "Experimental determination of surface phonons by helium atom and electron energy loss spectroscopy", Surface Phonons, Springer-Verlag, Berlin Heidelberg (1991)
1 2 3 P. Brüesch, Phonons: Theory and Experiments I: Lattice Dynamics and Models of Interatomic Forces, Springer-Verlag, Berlin Heidelberg (1982)
↑ P. M. Morse, "Diatomic Molecules According to the Wave Mechanics. II. Vibrational Levels," Physical Review34, 57 (1929), doi : 10.1103/PhysRev.34.57
1 2 K. Oura, V. G. Lifshits, A. A. Saranin, A. V. Zotov and M. Katayama, Surface Science: An Introduction, Springer-Verlag, Berlin Heidelberg (2003), https://www.springer.com/materials/surfaces+interfaces/book/978-3-540-00545-2

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.

[Szeftel-1] 1 2 3 4 5 6 7 J. Szeftel, "Surface phonon dispersion, using electron energy loss spectroscopy," Surface Science, 152/153 (1985) 797–810, doi : 10.1016/0039-6028(85)90490-X

[Hwang-2] Y.-N. Hwang and S.-H. Park, "Size-dependent surface phonon mode of CdSe quantum dots," Physical Review B59, 7285–7288 (1999), doi : 10.1103/PhysRevB.59.7285

[Kress-3] 1 2 3 W. Kress and F. W. de Wette, "Study of surface phonons by the slab method," Surface Phonons, Springer-Verlag, Berlin Heidelberg (1991)

[Toennies-4] 1 2 3 4 5 6 7 8 9 10 J. P. Toennies, "Experimental determination of surface phonons by helium atom and electron energy loss spectroscopy", Surface Phonons, Springer-Verlag, Berlin Heidelberg (1991)

[Bruesch-5] 1 2 3 P. Brüesch, Phonons: Theory and Experiments I: Lattice Dynamics and Models of Interatomic Forces, Springer-Verlag, Berlin Heidelberg (1982)

[Morse-6] P. M. Morse, "Diatomic Molecules According to the Wave Mechanics. II. Vibrational Levels," Physical Review34, 57 (1929), doi : 10.1103/PhysRev.34.57

[Oura-7] 1 2 K. Oura, V. G. Lifshits, A. A. Saranin, A. V. Zotov and M. Katayama, Surface Science: An Introduction, Springer-Verlag, Berlin Heidelberg (2003), https://www.springer.com/materials/surfaces+interfaces/book/978-3-540-00545-2

[1]

[2]

[3]

[4]

[5]

[6]

[7]