Swanson Coupe

Last updated
Swanson Coupe Model W-15
Swanson Coupe.jpg
Swanson Coupe
Role Light aircraft
National originUnited States
ManufacturerSwanson Aircraft Company Inc.
Designer Swen Swanson
Introduction1931
StatusProduction completed

The Swanson Coupe Model W-15 was a high-wing, cantilever-type monoplane produced in 1931 by Swedish aircraft designer and manufacturer Swen Swanson. Its design was considered innovative and the aircraft was viewed as part of a trend of producing safe and economical airplanes, which would appeal especially to automobile drivers. The Swanson Coupe was also designed to function as trainer aircraft.

Contents

Design and development

Swanson's design of the Kari-Keen Coupe monoplane incorporated his trademark seating design of two people in side-by-side configuration which was unusual at the time. [1] Following the first version of the Kari Keen Coupe, Swanson designed the Kari-Keen 90, an improved version. [2] But the Kari-Keen factory fell victim to the Great Depression and by early 1930 it closed its doors. Swanson did not wait for long and left Kari-Keen to devote his time to the design of his Swanson Coupe W-15. [2]

The cockpit of W-15 Swanson Coupe cockpit.jpg
The cockpit of W-15

In 1931, after he left Kari-Keen, Swanson established the Swanson Aircraft Co. Inc. with headquarters at Hopewell, Virginia, [3] [4] and built the Swanson Coupe W-15 whose design incorporated new breakthroughs such as a new type of patented wing mounting structure which enabled unobstructed view from the cockpit to both pilot and passenger even from above their heads. The new wing mounting technique also increased the peripheral field of view of the cabin. This was accomplished by eliminating an extra wing span which used to enter the cabin area and obstruct the ceiling of the cockpit thus limiting the overhead field of vision. [2] [5] [6] [7] The Swanson Coupe Model W-15 has been described as "beautiful", [2] and its cantilever wing design has been called "ingenious". [6] The plane was certified by the United States Department of Commerce and was powered by the Warner Scarab engine, [6] [8] [9] which produced 85 h.p. at 1950 rpm. [8]

The Kari-Keen Coupe and the Swanson Coupe featured the characteristic Swanson cantilever wing design. [10] The Swanson planes also shared a similar seating configuration; the two-passengers were seated beside each other. [11] Model W-15 featured detachable passenger-side controls which could be mounted or removed depending on whether a student pilot was present. This design feature made the plane suitable for use in flight schools. The cabin windshield was made using safety glass and the door window panes were retractable. The plane had two variants: Standard and Deluxe. Both variants had dual flight controls, low pressure tires and mohair interior. Both models featured dual engine throttle controls: the main throttle control and a secondary throttle control button installed on the brake lever. [8] The Deluxe came with an electric starter and more elaborate instrumentation. The prices were $4,450 for the Standard model and $4,985 for the Deluxe. [6]

Impact

Swanson did not have any commercial success with his Swanson Coupe. [2] He subsequently decided to dissolve his aircraft company and went to the midwest to join the aircraft company of his friend Ole Fahlin. [2] The Swanson Coupe became the basis of the first airplane produced jointly by them, the Fahlin SF-1. [12] The Swanson Coupe was mentioned in a 1931 article of The Tuscaloosa News as an example of a closed-cabin, safe and economical airplane which was intended for use by "average men" who also drive cars. [13]

Specifications (W-15)

Data from Flying Magazine. May 1931 [6]

General characteristics

Performance

Related Research Articles

Curtiss Robin

The Curtiss Robin, introduced in 1928, was a high-wing monoplane built by the Curtiss-Robertson Airplane Manufacturing Company. The J-1 version was flown by Wrongway Corrigan who crossed the Atlantic after being refused permission.

Monocoupe 90

The Monocoupe 90 was a two-seat, light cabin airplane built by Donald A. Luscombe for Monocoupe Aircraft. The first Monocoupe was built in an abandoned church in Davenport, Iowa, and first flew on April 1, 1927. Various models were in production until the late 1940s.

Cessna Airmaster

The Cessna Airmaster, is a family of single-engined aircraft manufactured by the Cessna Aircraft Company. The Airmaster played an important role in the revitalization of Cessna in the 1930s after the crash of the aviation industry during the Great Depression.

Aeronca L

The Aeronca L was a 1930s American cabin monoplane designed and built, in small numbers, by Aeronca Aircraft. It differed significantly from other Aeronca planes by the use of radial engines, streamlining, and a cantilever low wing.

Arrow Sport Early biplane

The Arrow Sport was a two-seat sporting biplane aircraft built in the United States in the 1920s and 1930s.

Culver Dart

The Culver Dart was a 1930s American two-seat light monoplane aircraft produced by the Dart Aircraft Company.

Cessna Model A

The Cessna Model A was a 1920s American high-wing four-seat tourer built by the Cessna Aircraft Company, the first in a long line of high-wing single-engined monoplanes.

Harlow PJC-2

The Harlow PJC-2 was a 1930s American four-seat cabin monoplane, designed by Max Harlow.

Ryan S-C

The Ryan S-C (Sports-Coupe) was an American three-seat cabin monoplane designed and built by the Ryan Aeronautical Company. At least one was impressed into service with the United States Army Air Forces as the L-10.

Rearwin Sportster

The Rearwin Sportster is a 1930s American two-seat, high-winged, cabin monoplane designed and built by Rearwin Aircraft & Engines for sport/touring use.

Verville Air Coach

The Verville Air Coach was a four-passenger, high-wing monoplane designed in 1927 by Alfred V. Verville and produced by his company, Verville Aircraft Company. It was a comfortable, good-looking cabin monoplane which sold for $10,500. The plane made its debut at the Detroit Air Show in 1929.

Mohawk M-1-C

The Mohawk M1C was a 1920s American two or three-seat low-wing monoplane designed and built by Mohawk Aero Corporation of Minneapolis, Minnesota. One M1C was evaluated by the United States Army Air Corps in 1930 as the YPT-7 Pinto for use as a primary trainer.

Kari-Keen 90 Sioux Coupe

The Kari-Keen 90 Sioux coupe was a two-seat cabin monoplane.

Ole (Olaf) Fahlin was a Swedish aviator who made his career manufacturing propellers and aviation products in the United States. He also developed prototype airplanes and worked in projects with Chrysler and Lockheed Corporation. His propellers were famous for their performance. During World War II he manufactured propellers for the U.S. government.

Fahlin SF-2 Plymocoupe

The Fahlin SF-2 Plymocoupe was a high-wing, cantilever type, prototype experimental airplane produced in 1935.

Swen (Sven) Swanson was a Swedish aircraft designer. He designed aircraft for various aviation companies in the United States and also designed prototype and experimental airplanes. He was known as an innovative aircraft designer. He later worked in partnership with Ole Fahlin. Swanson started designing airplanes while in his teens and by the time he was in college he had designed his third airplane. He founded the Swanson Aircraft Company Inc. and became its chief engineer and president. While working for his own company he designed and built the Swanson W-15 Coupe. He has been described as a "brilliant man of great capabilities and extreme modesty".

G.A.C. 102 Aristocrat

The G.A.C. 102 Aristocrat or General 102 Aristocrat is a single-engined cabin monoplane built in the US just before the Great Depression. It proved popular, with over forty built; an early example was taken on an aerial survey of Antarctica. One survives.

Huntington Governor Two Seater Monoplane

The Huntington H-11 Governor was a two-seat cabin monoplane with a high, cantilever wing built in the United States and first flown around 1930. Three were completed.

Swanson-Fahlin SF-1

The Swanson-Fahlin SF-1 was a high wing, two seat cabin aircraft with a small radial engine, designed in the United States and first flown in 1934. Only one was built.

References

  1. ↑ The AOPA Pilot. Aircraft Owners and Pilots Association. 1974. p. 68. Swanson's new airplane was the Kari- Keen Coupe, a little side-by-side, two- seater monoplane turned out at a time when such designs were rare. Further, it was a fully cantilevered monoplane with a tapered wood-frame wing and steel-tube ...
  2. 1 2 3 4 5 6 U.S. Civil Aircraft. Aero Publishers. 1967. p. 112. ari-Keen" 90 was slight improvement over earlier Swanson design. Fig. 124. Neatly cowled in-line engines of "Osprey" were innovation. of his many accomplishments. Avidly interested in aeronautics, Swanson designed his first airplane in ...[...] Fretting over the inactivity, Swanson left Kari-Keen and began developing the beautiful Swanson "Coupe" model W-15. [...] Failing to achieve any success with his new "Coupe" model W-15, Swanson returned to the mid-west to design two more outstanding airplanes (the Swanson- Fahlin "Coupe" and the "Plymacoupe") before he succumbed to a very bad case of ...
  3. ↑ Aero Digest. 18–19. Aeronautical Digest Publishing Corporation. 1931. p. 64. THE Swanson Aircraft Company, Inc., of Hopewell, Virginia, is now producing its cantilever monoplane known as the Swanson Coupe, Model W-15, recently approved by the Department of Commerce, and powered by the Warner Scarab ...
  4. ↑ Welman Austin Shrader; Eaton Manufacturing Company (1953). Fifty years of flight: a chronicle of the aviation industry in America, 1903-1953. Eaton Manufacturing Co. p. 49. Swanson Aircraft Co., Inc., is incorporated at Hopewell, Va., by Swen S. Swanson to manufacture the Swanson coupe.
  5. ↑ Western Aerospace. Western Aviation Magazine. January 1931. p. 84. visibility that gives perfect forward and side vision, and for the first time, allows a full overhead vision — all for both pilot and passenger. This visibility comes from the patented wing truss, ...
  6. 1 2 3 4 5 "Flying Magazine: The Swanson Coupe Has Ingenious Cantilever Wing". Flying: 25. May 1931. ISSN   0015-4806.
  7. ↑ Flying. 38. Ziff-Davis Publishing Company. 1946. p. 88.
  8. 1 2 3 Airway Age. 1931. pp. 489–490. New Swanson Coupe The Swanson Coupe THE Swanson Aircraft Company Inc., of Hopewell, Va., has produced the Swanson Coupe, a single engine, cabin monoplane, powered with a Warner Scarab engine, developing 85 hp. at 1950 [...] Dual controls are furnished with both models. By means of an auxiliary push button throttle located on the brake handle, the pilot is able to control the speed of the engine without resorting to the main throttle. Wings Span Chord at root at tip ...
  9. ↑ Aero Digest. 32–33. Aeronautical Digest Publishing Corporation. 1938. p. 152. WARNER POWERED Swanson Coupe: 2-place, side by side cabin; cruises 100
  10. ↑ The AOPA Pilot: Voice of General Aviation. Aircraft Owners and Pilots Association. 1980. p. 100. The Kari-Keen Coupe, the Sioux Coupe and finally the Swanson Coupe were all basically the same cantilever-wing cabin ... Swanson teamed up with an old friend, propeller-maker Ole Fahlin, to upgrade the design, which Fahlin produced as ...
  11. ↑ Sport Aviation. 39. Experimental Aircraft Association. 1990. p. 223. A small airplane by standards of the day, it had an upper wing span of 25 ft. ... Swanson would go on to design the Kari-Keen/Sioux Coupe, his own Swan- son Coupe and, with Ole Fahlin, the Plymacoupe ... all 2-place, side-by- side, high wing ...
  12. ↑ "W-15 Coupe 1931 (ATC 2-312)". Design carried into Swanson-Fahlin SF-1
  13. ↑ Israel Klein, Science Editor, NEA Service (July 15, 1931). "Smaller Planes Designed to Use By Average Man (Aviation Engineers Produce Planes To Catch Eye Of Man Who Drives Car)". The Tuscaloosa News .CS1 maint: multiple names: authors list (link)
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.