TILLING (molecular biology)

Last updated

TILLING (Targeting Induced Local Lesions in Genomes) is a method in molecular biology that allows directed identification of mutations in a specific gene. TILLING was introduced in 2000, using the model plant Arabidopsis thaliana , and expanded on into other uses and methodologies by a small group of scientists including Luca Comai. TILLING has since been used as a reverse genetics method in other organisms such as zebrafish, maize, wheat, rice, soybean, tomato and lettuce.

Contents

Overview

The method combines a standard and efficient technique of mutagenesis using a chemical mutagen such as ethyl methanesulfonate (EMS) with a sensitive DNA screening-technique that identifies single base mutations (also called point mutations) in a target gene. The TILLING method relies on the formation of DNA heteroduplexes that are formed when multiple alleles are amplified by PCR and are then heated and slowly cooled. A “bubble” forms at the mismatch of the two DNA strands, which is then cleaved by a single stranded nuclease. The products are then separated by size on several different platforms (see below).

Mismatches may be due to induced mutation, heterozygosity within an individual, or natural variation between individuals.

EcoTILLING [1] [2] [3] [4] is a method that uses TILLING techniques to look for natural mutations in individuals, usually for population genetics analysis. DEcoTILLING [5] is a modification of TILLING and EcoTILLING which uses an inexpensive method to identify fragments. Since the advent of NGS sequencing technologies, TILLING-by-sequencing [6] has been developed based on Illumina sequencing of target genes amplified from multidimensionally pooled templates to identify possible single-nucleotide changes.

Single strand cleavage enzymes

There are several sources for single strand nucleases. The first widely used enzyme was mung bean nuclease, but this nuclease has been shown to have high non-specific activity, and only works at low pH, which can degrade PCR products and dye-labeled primers. The original source for single strand nuclease was from CEL1, or CJE (celery juice extract), but other products have entered the market including Frontier Genomics’ SNiPerase enzymes, which have been optimized for use on platforms that use labeled and unlabeled PCR products (see next section). Transgenomic isolated the single strand nuclease protein and sells it as a recombinant form. The advantage of the recombinant form is that unlike the enzyme mixtures, it does not contain non-specific nuclease activity, which can degrade the dyes on the PCR primers. The disadvantage is a substantially higher cost.

Separation of cleaved products

The first paper describing TILLING used HPLC to identify mutations (McCallum et al., 2000a). The method was made more high throughput by using the restriction enzyme Cel-I combined with the LICOR gel based system to identify mutations (Colbert et al., 2001). Advantages to using this system are that mutation sites can be easily confirmed and differentiated from noise. This is because different colored dyes can be used for the forward and reverse primers. Once the cleavage products have been run on a gel, it can be viewed in separate channels, and much like an RFLP, the fragment sizes within a lane in each channel should add up to the full length product size. Advantages to the LICOR system are separation of large fragments (~ 2kb), high sample throughput (96 samples loaded on paper combs), and freeware to identify the mutations (GelBuddy). Drawbacks to the LICOR system is having to pour slab gels and long run times (~4 hours). TILLING and EcoTILLING methods are now being used on capillary systems from, Advanced Analytical Technologies, ABI and Beckman.

Several systems can be used to separate PCR products that are not labeled with dyes. Simple agarose electrophoresis systems will separate cleavage products inexpensively and with standard lab equipment. This was used to discover SNPs in chum salmon and was referred to as DEcoTILLING. The disadvantage of this system is reduced resolution compared to polyacrylamide systems. Elchrom Scientific sells Spreadex gels which are precast, can be high throughput and are more sensitive than standard polyacrylamide gels. Advanced Analytical Technologies Inc sells the AdvanCE FS96 dsDNA Fluorescent System which is a 96 capillary electrophoresis system that has several advantages over traditional methods; including ability to separate large fragments (up to 40kb), no desalting or precipitation step required, short run times (~30 minutes), sensitivity to 5pg/ul and no need for fluorescent labeled primers.

TILLING centers

Several TILLING centers exist over the world that focus on agriculturally important species:

Related Research Articles

<span class="mw-page-title-main">Polymerase chain reaction</span> Laboratory technique to multiply a DNA sample for study

The polymerase chain reaction (PCR) is a method widely used to make millions to billions of copies of a specific DNA sample rapidly, allowing scientists to amplify a very small sample of DNA sufficiently to enable detailed study. PCR was invented in 1983 by American biochemist Kary Mullis at Cetus Corporation. Mullis and biochemist Michael Smith, who had developed other essential ways of manipulating DNA, were jointly awarded the Nobel Prize in Chemistry in 1993.

In genetics and biochemistry, sequencing means to determine the primary structure of an unbranched biopolymer. Sequencing results in a symbolic linear depiction known as a sequence which succinctly summarizes much of the atomic-level structure of the sequenced molecule.

A genetic screen or mutagenesis screen is an experimental technique used to identify and select individuals who possess a phenotype of interest in a mutagenized population. Hence a genetic screen is a type of phenotypic screen. Genetic screens can provide important information on gene function as well as the molecular events that underlie a biological process or pathway. While genome projects have identified an extensive inventory of genes in many different organisms, genetic screens can provide valuable insight as to how those genes function.

Site-directed mutagenesis is a molecular biology method that is used to make specific and intentional mutating changes to the DNA sequence of a gene and any gene products. Also called site-specific mutagenesis or oligonucleotide-directed mutagenesis, it is used for investigating the structure and biological activity of DNA, RNA, and protein molecules, and for protein engineering.

<span class="mw-page-title-main">DNA sequencing</span> Process of determining the nucleic acid sequence

DNA sequencing is the process of determining the nucleic acid sequence – the order of nucleotides in DNA. It includes any method or technology that is used to determine the order of the four bases: adenine, guanine, cytosine, and thymine. The advent of rapid DNA sequencing methods has greatly accelerated biological and medical research and discovery.

<span class="mw-page-title-main">Sanger sequencing</span> Method of DNA sequencing developed in 1977

Sanger sequencing is a method of DNA sequencing that involves electrophoresis and is based on the random incorporation of chain-terminating dideoxynucleotides by DNA polymerase during in vitro DNA replication. After first being developed by Frederick Sanger and colleagues in 1977, it became the most widely used sequencing method for approximately 40 years. An automated instrument using slab gel electrophoresis and fluorescent labels was first commercialized by Applied Biosystems in March 1987. Later, automated slab gels were replaced with automated capillary array electrophoresis. More recently, higher volume Sanger sequencing has been replaced by next generation sequencing methods, especially for large-scale, automated genome analyses. However, the Sanger method remains in wide use for smaller-scale projects and for validation of deep sequencing results. It still has the advantage over short-read sequencing technologies in that it can produce DNA sequence reads of > 500 nucleotides and maintains a very low error rate with accuracies around 99.99%. Sanger sequencing is still actively being used in efforts for public health initiatives such as sequencing the spike protein from SARS-CoV-2 as well as for the surveillance of norovirus outbreaks through the Center for Disease Control and Prevention's (CDC) CaliciNet surveillance network.

<span class="mw-page-title-main">Zinc-finger nuclease</span> Artificial enzymes

Zinc-finger nucleases (ZFNs) are artificial restriction enzymes generated by fusing a zinc finger DNA-binding domain to a DNA-cleavage domain. Zinc finger domains can be engineered to target specific desired DNA sequences and this enables zinc-finger nucleases to target unique sequences within complex genomes. By taking advantage of endogenous DNA repair machinery, these reagents can be used to precisely alter the genomes of higher organisms. Alongside CRISPR/Cas9 and TALEN, ZFN is a prominent tool in the field of genome editing.

SNP genotyping is the measurement of genetic variations of single nucleotide polymorphisms (SNPs) between members of a species. It is a form of genotyping, which is the measurement of more general genetic variation. SNPs are one of the most common types of genetic variation. An SNP is a single base pair mutation at a specific locus, usually consisting of two alleles. SNPs are found to be involved in the etiology of many human diseases and are becoming of particular interest in pharmacogenetics. Because SNPs are conserved during evolution, they have been proposed as markers for use in quantitative trait loci (QTL) analysis and in association studies in place of microsatellites. The use of SNPs is being extended in the HapMap project, which aims to provide the minimal set of SNPs needed to genotype the human genome. SNPs can also provide a genetic fingerprint for use in identity testing. The increase of interest in SNPs has been reflected by the furious development of a diverse range of SNP genotyping methods.

<span class="mw-page-title-main">Bisulfite sequencing</span> Lab procedure detecting 5-methylcytosines in DNA

Bisulfitesequencing (also known as bisulphite sequencing) is the use of bisulfite treatment of DNA before routine sequencing to determine the pattern of methylation. DNA methylation was the first discovered epigenetic mark, and remains the most studied. In animals it predominantly involves the addition of a methyl group to the carbon-5 position of cytosine residues of the dinucleotide CpG, and is implicated in repression of transcriptional activity.

In the fields of bioinformatics and computational biology, Genome survey sequences (GSS) are nucleotide sequences similar to expressed sequence tags (ESTs) that the only difference is that most of them are genomic in origin, rather than mRNA.

<span class="mw-page-title-main">Transcription activator-like effector nuclease</span> Enzymes that cleave DNA in specific ways

Transcription activator-like effector nucleases (TALEN) are restriction enzymes that can be engineered to cut specific sequences of DNA. They are made by fusing a TAL effector DNA-binding domain to a DNA cleavage domain. Transcription activator-like effectors (TALEs) can be engineered to bind to practically any desired DNA sequence, so when combined with a nuclease, DNA can be cut at specific locations. The restriction enzymes can be introduced into cells, for use in gene editing or for genome editing in situ, a technique known as genome editing with engineered nucleases. Alongside zinc finger nucleases and CRISPR/Cas9, TALEN is a prominent tool in the field of genome editing.

MicroRNA sequencing (miRNA-seq), a type of RNA-Seq, is the use of next-generation sequencing or massively parallel high-throughput DNA sequencing to sequence microRNAs, also called miRNAs. miRNA-seq differs from other forms of RNA-seq in that input material is often enriched for small RNAs. miRNA-seq allows researchers to examine tissue-specific expression patterns, disease associations, and isoforms of miRNAs, and to discover previously uncharacterized miRNAs. Evidence that dysregulated miRNAs play a role in diseases such as cancer has positioned miRNA-seq to potentially become an important tool in the future for diagnostics and prognostics as costs continue to decrease. Like other miRNA profiling technologies, miRNA-Seq has both advantages and disadvantages.

<span class="mw-page-title-main">Genetic engineering techniques</span> Methods used to change the DNA of organisms

Genetic engineering techniques allow the modification of animal and plant genomes. Techniques have been devised to insert, delete, and modify DNA at multiple levels, ranging from a specific base pair in a specific gene to entire genes. There are a number of steps that are followed before a genetically modified organism (GMO) is created. Genetic engineers must first choose what gene they wish to insert, modify, or delete. The gene must then be isolated and incorporated, along with other genetic elements, into a suitable vector. This vector is then used to insert the gene into the host genome, creating a transgenic or edited organism.

<span class="mw-page-title-main">Surveyor nuclease assay</span>

Surveyor nuclease assay is an enzyme mismatch cleavage assay used to detect single base mismatches or small insertions or deletions (indels).

<span class="mw-page-title-main">Duplex sequencing</span>

Duplex sequencing is a library preparation and analysis method for next-generation sequencing (NGS) platforms that employs random tagging of double-stranded DNA to detect mutations with higher accuracy and lower error rates.

Off-target genome editing refers to nonspecific and unintended genetic modifications that can arise through the use of engineered nuclease technologies such as: clustered, regularly interspaced, short palindromic repeats (CRISPR)-Cas9, transcription activator-like effector nucleases (TALEN), meganucleases, and zinc finger nucleases (ZFN). These tools use different mechanisms to bind a predetermined sequence of DNA (“target”), which they cleave, creating a double-stranded chromosomal break (DSB) that summons the cell's DNA repair mechanisms and leads to site-specific modifications. If these complexes do not bind at the target, often a result of homologous sequences and/or mismatch tolerance, they will cleave off-target DSB and cause non-specific genetic modifications. Specifically, off-target effects consist of unintended point mutations, deletions, insertions inversions, and translocations.

BLESS, also known as breaks labeling, enrichment on streptavidin and next-generation sequencing, is a method used to detect genome-wide double-strand DNA damage. In contrast to chromatin immunoprecipitation (ChIP)-based methods of identifying DNA double-strand breaks (DSBs) by labeling DNA repair proteins, BLESS utilizes biotinylated DNA linkers to directly label genomic DNA in situ which allows for high-specificity enrichment of samples on streptavidin beads and the subsequent sequencing-based DSB mapping to nucleotide resolution.

<span class="mw-page-title-main">MNase-seq</span> Method used to analyse protein interactions with DNA

MNase-seq, short for micrococcal nuclease digestion with deep sequencing, is a molecular biological technique that was first pioneered in 2006 to measure nucleosome occupancy in the C. elegans genome, and was subsequently applied to the human genome in 2008. Though, the term ‘MNase-seq’ had not been coined until a year later, in 2009. Briefly, this technique relies on the use of the non-specific endo-exonuclease micrococcal nuclease, an enzyme derived from the bacteria Staphylococcus aureus, to bind and cleave protein-unbound regions of DNA on chromatin. DNA bound to histones or other chromatin-bound proteins may remain undigested. The uncut DNA is then purified from the proteins and sequenced through one or more of the various Next-Generation sequencing methods.

Luca Comai is an Italian plant biologist whose work has focused on trait discovery for improving agricultural crops and on developing protocols and systems for identifying new genes and mutations in plants. Through his work at Calgene, Comai was one of the first discoverers of the glyphosate resistance gene and is considered a pioneer in the field of plant biotechnology research.

<span class="mw-page-title-main">GESTALT</span> Method for lineage tracing using CRISPR-Cas9-edited barcodes

Genome editing of synthetic target arrays for lineage tracing (GESTALT) is a method used to determine the developmental lineages of cells in multicellular systems. GESTALT involves introducing a small DNA barcode that contains regularly spaced CRISPR/Cas9 target sites into the genomes of progenitor cells. Alongside the barcode, Cas9 and sgRNA are introduced into the cells. Mutations in the barcode accumulate during the course of cell divisions and the unique combination of mutations in a cell's barcode can be determined by DNA or RNA sequencing to link it to a developmental lineage.

References

  1. ↑ Comai, L.; Young, K.; Till, B. J.; Reynolds, S. H.; Greene, E. A.; Codomo, C. A.; Enns, L. C.; Johnson, J. E.; Burtner, C.; Odden, A. R.; Henikoff, S. (2004). "Efficient discovery of DNA polymorphisms in natural populations by Ecotilling". The Plant Journal. 37 (5): 778–786. doi:10.1111/j.0960-7412.2003.01999.x. PMID   14871304.
  2. ↑ Gilchrist, E. J.; Haughn, G. W.; Ying, C. C.; Otto, S. P.; Zhuang, J.; Cheung, D.; Hamberger, B.; Aboutorabi, F.; Kalynyak, T.; Johnson, L. E. E.; Bohlmann, J.; Ellis, B. E.; Douglas, C. J.; Cronk, Q. C. B. (2006). "Use of Ecotilling as an efficient SNP discovery tool to survey genetic variation in wild populations of Populus trichocarpa". Molecular Ecology. 15 (5): 1367–1378. Bibcode:2006MolEc..15.1367G. doi:10.1111/j.1365-294X.2006.02885.x. PMID   16626459. S2CID   16198260.
  3. ↑ Mejlhede, N.; Kyjovska, Z.; Backes, G.; Burhenne, K.; Rasmussen, S. K.; Jahoor, A. (2006). "EcoTILLING for the identification of allelic variation in the powdery mildew resistance genes mlo and Mla of barley" (PDF). Plant Breeding. 125 (5): 461–467. doi:10.1111/j.1439-0523.2006.01226.x. S2CID   62901355.
  4. ↑ Nieto, C.; Piron, F.; Dalmais, M.; Marco, C. F.; Moriones, E.; Gómez-Guillamón, M. L.; Truniger, V.; Gómez, P.; Garcia-Mas, J.; Aranda, M. A.; Bendahmane, A. (2007). "EcoTILLING for the identification of allelic variants of melon eIF4E, a factor that controls virus susceptibility". BMC Plant Biology. 7: 34. doi: 10.1186/1471-2229-7-34 . PMC   1914064 . PMID   17584936.
  5. ↑ Garvin, M. R.; Gharrett, A. J. (2007). "DEco-TILLING: An inexpensive method for single nucleotide polymorphism discovery that reduces ascertainment bias". Molecular Ecology Notes. 7 (5): 735–746. doi:10.1111/j.1471-8286.2007.01767.x.
  6. ↑ Tsai, Helen; Howell, Tyson; Nitcher, Rebecca; Missirian, Victor; Watson, Brian; Ngo, Kathie J.; Lieberman, Meric; Fass, Joseph; Uauy, Cristobal; Tran, Robert K.; Khan, Asif Ali; Filkov, Vladimir; Tai, Thomas H.; Dubcovsky, Jorge; Comai, Luca (2011). "Discovery of Rare Mutations in Populations: TILLING by Sequencing". Plant Physiology. 156 (3): 1257–1268. doi:10.1104/pp.110.169748. PMC   3135940 . PMID   21531898.

Scientific literature

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.