TRAU

Last updated • 1 min readFrom Wikipedia, The Free Encyclopedia

A Transcoder and Rate Adaptation Unit (TRAU) performs transcoding function for speech channels and RA (Rate Adaptation) [1] [2] [3] for data channels in the GSM network. The Transcoder/Rate Adaptation Unit (TRAU) is the data rate conversion unit. The PSTN/ISDN switch is a switch for 64 kbit/s voice. Current technology permits to decrease the bit-rate (in GSM radio interface it is 16 kbit/s for full rate and 8 kbit/s for half rate). Since MSC is basically a PSTN/ISDN switch its bit-rate is still 64 kbit/s. That is why a rate conversion is required in between the BSC and MSC.

Contents

Transcoding is the compression of speech data from 64 kbit/s to 13/12.2/6.5 kbit/s in case FR/EFR/HR (respectively) speech coding. Rate adaptation without transcoding allows Tandem Free Operation (TFO), allowing the original encoded speech data to be carried in a 64 kbit/s channel. TFO offers benefits because transcoding can lead to a degradation of speech quality and requires computational resources.

TRAU was also the term used for the frame format used in transport of the compressed bits from these speech coders.

Brief explanation

For an MS-to-MS call, the transmission path covers the radio access network (RAN) as well as the core network (CN). Since the transmission modes and coding standards are different for RAN and CN, speech data is converted/transcoded at the transition points from RAN to CN. This conversion is performed in the TRAU network element which connects RAN and CN.

16 kbit/s for FR (Full Rate), Redundancy (Channel Coding)= 9.8 kbit/s
=> Gross data rate after adding redundancy = 22.8 kbit/s
=> 12.2 kbit/s for EFR (Enhanced Full rate) => Gross data rate after adding redundancy = 11.4 kbit/s.

See also

Related Research Articles

<span class="mw-page-title-main">Enhanced Data rates for GSM Evolution</span> Digital mobile phone technology

Enhanced Data rates for GSM Evolution (EDGE), also known as 2.75G, Enhanced GPRS (EGPRS), IMT Single Carrier (IMT-SC), and Enhanced Data rates for Global Evolution, is a 2G digital mobile phone technology for data transmission. It is a subset of General Packet Radio Service (GPRS) on the GSM network and improves upon it offering speeds close to 3G technology, hence the name 2.75G. It is also recognized as part of the International Mobile Telecommunications - 2000 (IMT-2000) standard.

<span class="mw-page-title-main">GSM</span> Cellular telephone network standard

The Global System for Mobile Communications (GSM) is a standard developed by the European Telecommunications Standards Institute (ETSI) to describe the protocols for second-generation (2G) digital cellular networks used by mobile devices such as mobile phones and tablets. GSM is also a trade mark owned by the GSM Association. "GSM" may also refer to the voice codec initially used in GSM.

<span class="mw-page-title-main">General Packet Radio Service</span> Packet oriented mobile data service on 2G and 3G

General Packet Radio Service (GPRS), also called 2.5G, is a mobile data standard on the 2G cellular communication network's global system for mobile communications (GSM). Networks and mobile devices with GPRS started to roll out around the year 2001. At the time of introduction it offered for the first time seamless mobile data transmission using packet data for an "always-on" connection, providing improved Internet access for web, email, WAP services, and Multimedia Messaging Service (MMS).

<span class="mw-page-title-main">ISDN</span> Set of digital telephony standards

Integrated Services Digital Network (ISDN) is a set of communication standards for simultaneous digital transmission of voice, video, data, and other network services over the digitalised circuits of the public switched telephone network. Work on the standard began in 1980 at Bell Labs and was formally standardized in 1988 in the CCITT "Red Book". By the time the standard was released, newer networking systems with much greater speeds were available, and ISDN saw relatively little uptake in the wider market. One estimate suggests ISDN use peaked at a worldwide total of 25 million subscribers at a time when 1.3 billion analog lines were in use. ISDN has largely been replaced with digital subscriber line (DSL) systems of much higher performance.

The Universal Mobile Telecommunications System (UMTS) is a 3G mobile cellular system for networks based on the GSM standard. Developed and maintained by the 3GPP, UMTS is a component of the International Telecommunication Union IMT-2000 standard set and compares with the CDMA2000 standard set for networks based on the competing cdmaOne technology. UMTS uses wideband code-division multiple access (W-CDMA) radio access technology to offer greater spectral efficiency and bandwidth to mobile network operators.

Personal Digital Cellular (PDC) was a 2G mobile telecommunications standard used exclusively in Japan.

Network switching subsystem (NSS) is the component of a GSM system that carries out call out and mobility management functions for mobile phones roaming on the network of base stations. It is owned and deployed by mobile phone operators and allows mobile devices to communicate with each other and telephones in the wider public switched telephone network (PSTN). The architecture contains specific features and functions which are needed because the phones are not fixed in one location.

<span class="mw-page-title-main">Base station subsystem</span> Section of cellular telephone network

The base station subsystem (BSS) is the section of a traditional cellular telephone network which is responsible for handling traffic and signaling between a mobile phone and the network switching subsystem. The BSS carries out transcoding of speech channels, allocation of radio channels to mobile phones, paging, transmission and reception over the air interface and many other tasks related to the radio network.

The Adaptive Multi-Rateaudio codec is an audio compression format optimized for speech coding. AMR is a multi-rate narrowband speech codec that encodes narrowband (200–3400 Hz) signals at variable bit rates ranging from 4.75 to 12.2 kbit/s with toll quality speech starting at 7.4 kbit/s.

In communications, Circuit Switched Data (CSD) is the original form of data transmission developed for the time-division multiple access (TDMA)-based mobile phone systems like Global System for Mobile Communications (GSM). After 2010 many telecommunication carriers dropped support for CSD, and CSD has been superseded by GPRS and EDGE (E-GPRS).

Enhanced Full Rate or EFR or GSM-EFR or GSM 06.60 is a speech coding standard that was developed in order to improve the quality of GSM.

Full Rate (FR), also known as GSM-FR or GSM 06.10 , was the first digital speech coding standard used in the GSM digital mobile phone system. It uses linear predictive coding (LPC). The bit rate of the codec is 13 kbit/s, or 1.625 bits/audio sample. The quality of the coded speech is quite poor by modern standards, but at the time of development it was a good compromise between computational complexity and quality, requiring only on the order of a million additions and multiplications per second. The codec is still widely used in networks around the world. Gradually FR will be replaced by Enhanced Full Rate (EFR) and Adaptive Multi-Rate (AMR) standards, which provide much higher speech quality with lower bit rate.

Half Rate is a speech coding system for GSM, developed in the early 1990s.

Adaptive Multi-Rate Wideband (AMR-WB) is a patented wideband speech audio coding standard developed based on Adaptive Multi-Rate encoding, using a similar methodology to algebraic code-excited linear prediction (ACELP). AMR-WB provides improved speech quality due to a wider speech bandwidth of 50–7000 Hz compared to narrowband speech coders which in general are optimized for POTS wireline quality of 300–3400 Hz. AMR-WB was developed by Nokia and VoiceAge and it was first specified by 3GPP.

Extended Adaptive Multi-Rate – Wideband (AMR-WB+) is an audio codec that extends AMR-WB. It adds support for stereo signals and higher sampling rates. Another main improvement is the use of transform coding additionally to ACELP. This greatly improves the generic audio coding. Automatic switching between transform coding and ACELP provides both good speech and audio quality with moderate bit rates.

GSM services are a standard collection of applications and features available over the Global System for Mobile Communications (GSM) to mobile phone subscribers all over the world. The GSM standards are defined by the 3GPP collaboration and implemented in hardware and software by equipment manufacturers and mobile phone operators. The common standard makes it possible to use the same phones with different companies' services, or even roam into different countries. GSM is the world's predominant mobile phone standard.

<span class="mw-page-title-main">High-Efficiency Advanced Audio Coding</span> Audio codec

High-Efficiency Advanced Audio Coding (HE-AAC) is an audio coding format for lossy data compression of digital audio defined as an MPEG-4 Audio profile in ISO/IEC 14496–3. It is an extension of Low Complexity AAC (AAC-LC) optimized for low-bitrate applications such as streaming audio. The usage profile HE-AAC v1 uses spectral band replication (SBR) to enhance the modified discrete cosine transform (MDCT) compression efficiency in the frequency domain. The usage profile HE-AAC v2 couples SBR with Parametric Stereo (PS) to further enhance the compression efficiency of stereo signals.

The Um interface is the air interface for the GSM mobile telephone standard. It is the interface between the mobile station (MS) and the Base transceiver station (BTS). It is called Um because it is the mobile analog to the U interface of ISDN. Um is defined in the GSM 04.xx and 05.xx series of specifications. Um can also support GPRS packet-oriented communication.

Tandem Free Operation (TFO) is a part of ETSI's 3GPP standard specification, which has been included from R99 of the standards specifications onwards.

In a telecommunication network Transcoder free operation, or TrFO, also known as Out of band transcoder control is the concept of removing transcoding function in a call path. In legacy GSM networks a call between two mobile stations involved two transcoding functions, one at each BSC. This transcoding functionality was generally implemented in a separate Transcoder and Rate Adaptation Unit, or TRAU. TRAU was connected to BSC and MSC through TDM E1 or STM-1.

References

  1. "3GPP TS 48.060 - In-band control of remote transcoders and rate adaptors for full rate traffic channels". 3GPP. Retrieved 2014-02-03.
  2. "3GPP TS 48.061 - In-band control of remote transcoders and rate adaptors for half rate traffic channels". 3GPP. Retrieved 2014-02-03.
  3. "3GPP TS 48.020 - Rate adaption on the Base Station System - Mobile-services Switching Centre (BSS - MSC) interface". 3GPP. Retrieved 2014-02-03.