Theiss Speedster

Last updated

Speedster
Role Ultralight aircraft
National origin United States
Manufacturer Theiss Aviation
StatusProduction completed
Number builtAt least two

The Theiss Speedster is an American Homebuilt ultralight biplane that was designed and produced by Theiss Aviation of Salem, Ohio. When it was available the aircraft was supplied as a quick-build kit for amateur construction. [1]

Contents

The Speedster is intended to resemble a 1920s era sport aircraft. [1]

Design and development

The aircraft was designed to comply with the US FAR 103 Ultralight Vehicles rules, including the category's maximum empty weight of 254 lb (115 kg).

The Speedster features a strut-braced biplane layout with interplane struts, a single-seat open cockpit, fixed conventional landing gear with wheel pants and a single engine in tractor configuration. The top wing is mounted on top of the fuselage instead of the more usual arrangement with cabane struts suspending it above the fuselage. [1]

The aircraft is made from a combination of aluminium, wood, steel and foam. Its 17.50 ft (5.3 m) span wing has a total wing area of 77.50 sq ft (7.200 m2). The cabin width is 20 in (51 cm). The acceptable power range is 38 to 55 hp (28 to 41 kW) and the standard engine used is the two stroke 40 hp (30 kW) Kawasaki 440 snowmobile powerplant. [1]

The Speedster has a typical empty weight of 252 lb (114 kg) and a gross weight of 460 lb (210 kg), giving a useful load of 208 lb (94 kg). With full fuel of 5 U.S. gallons (19 L; 4.2 imp gal) the payload for the pilot and baggage is 178 lb (81 kg). [1]

The standard day, sea level, no wind, take off and landing roll with a 40 hp (30 kW) engine is 200 ft (61 m). [1]

The manufacturer estimates the construction time from the supplied kit as 400 hours. [1]

After producing the Speedster, the company turned its attention to produce unmanned aerial vehicles for the US Navy and no longer produces manned aircraft. [2]

Operational history

By 1998 the company reported that two aircraft were completed and flying. [1]

Specifications (Speedster)

Data from AeroCrafter [1]

General characteristics

Performance

Related Research Articles

The RagWing RW9 Motor Bipe is a family of single seat, open-frame fuselage, open-cockpit, single engine ultralight aircraft designed by Roger Mann and sold as plans by RagWing Aircraft Designs for amateur construction.

The US Aviation CAVU is an American high-wing, strut-braced, single-seat, open cockpit, single engine in pusher configuration, ultralight aircraft that was designed and produced by AeroDreams of Manchester, Tennessee, but marketed by US Aviation of St Paul, Minnesota under their brand name. The aircraft was supplied as a kit for amateur construction.

The Hovey Delta Bird is an American ultralight aircraft that was designed by Bob Hovey in 1982 and supplied as plans for amateur construction.

The Mathews Petit Breezy is an American ultralight aircraft that was designed by Lyle Matthews in conjunction with his partners Al Petit and Kindall and Wink Turner. It was made available in the form of plans for amateur construction. The aircraft was inspired by the larger RLU-1 Breezy.

The Mathews PUP, also called the P.U.P., is an American ultralight aircraft that was designed by Lyle Mathews in 1983 and made available in the form of plans for amateur construction.

The Golden Gate Mosquito is an American ultralight aircraft that was produced by Golden Gate Aviation. The aircraft was supplied as a kit for amateur construction.

The Worldwide Ultralite Spitfire is an American ultralight aircraft that was designed by Fred Bell and manufactured by Worldwide Ultralite Industries and later by Don Ecker and Air Magic Ultralights of Houston, Texas. The aircraft was supplied as a kit for amateur construction.

The Vortech G-1, also called the Compcop G-1, is an American helicopter that was designed in the 1970s. Plans for amateur construction were originally supplied by Compcop and today are provided by Vortech.

The Norman Aviation Nordic II is a Canadian advanced ultralight aircraft, designed by Jacques Norman and produced by Norman Aviation of Saint-Anselme, Quebec, first flying in 1986. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft and remained in production through 2012.

The Fly Hard Trikes SkyCycle is an American ultralight trike, designed by Mike Theeke and produced by Fly Hard Trikes of Wildwood, Georgia. The aircraft is supplied as a complete ready-to-fly-aircraft and several hundred have been completed and flown.

The Bagalini Bagalini is an Italian homebuilt ultralight aircraft that was designed by Marino Bagalini. The aircraft is supplied in the form of plans for amateur construction.

The Butterfly Banty, also called the Kimbrel Banty for its designer, is an American homebuilt ultralight aircraft that was designed by Mike Kimbrel and produced by Butterfly Aero of Oakville, Washington, introduced in 1984. The aircraft was supplied in the form of plans for amateur construction.

Early Bird Jenny American homebuilt aircraft

The Early Bird Jenny is an American homebuilt aircraft that was designed by Dennis Wiley and produced by the Early Bird Aircraft Company of Erie, Colorado, also by Leading Edge Airfoils of Peyton, Colorado. When it was available the aircraft was supplied as a kit and also in the form of plans for amateur construction.

Hatz Classic American homebuilt biplane

The Hatz Classic is an American homebuilt biplane, designed by Billy Dawson and produced by the Makelan Corporation of New Braunfels, Texas. The aircraft is supplied as a kit or, alternatively, in the form of plans for amateur construction.

The Midwest Questar XLS is an American ultralight aircraft that was designed and produced by Midwest Engineering of Overland Park, Kansas. When it was available the aircraft was supplied in the form of plans for amateur construction, but the plans were withdrawn on 29 June 2000.

SkyDancer SD-260 American homebuilt aircraft

The SkyDancer SD-260 was an American aerobatic homebuilt biplane that was designed and produced by SkyDancer Aviation of Louisville, Kentucky, introduced in the mid-1990s. When it was available the aircraft was supplied as a kit.

Stolp SA-900 V-Star American light aircraft

The Stolp SA-900 V-Star is an American aerobatic homebuilt biplane, currently produced by Aircraft Spruce & Specialty Co in the form of plans for amateur construction. In the 1990s it was also available as a kit from Stolp Starduster Corporation of Riverside, California.

The Mathews Mr Easy is an American homebuilt aircraft that was designed by Lyle Mathews and associates and produced by the Vintage Ultralight and Lightplane Association of Marietta, Georgia. It was the sixth and final design of Mathews. The aircraft is supplied in the form of plans for amateur construction.

The Vintage Ultralight SR-1 Hornet is an American homebuilt aircraft produced by the Vintage Ultralight and Lightplane Association of Marietta, Georgia, introduced in the early 1980s. The aircraft was supplied in the form of plans for amateur construction, although plans are no longer available.

The Vancil Spitz S1 is an American homebuilt aircraft that was designed and produced by A. Vancil of Belton, South Carolina, introduced in the late 1990s. When it was available the aircraft was supplied as a kit and also in the form of plans for amateur construction.

References

  1. 1 2 3 4 5 6 7 8 9 Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, Fifth Edition, page 273. BAI Communications, 15 July 1998. ISBN   0-9636409-4-1
  2. ↑ Theiss Aviation. "Company History". Archived from the original on June 19, 2015. Retrieved March 22, 2014.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.