Thornycroft J Type | |
---|---|
Type | 3-ton lorry |
Place of origin | United Kingdom |
Service history | |
Used by | British Empire |
Wars | First World War |
Production history | |
Designer | Thornycroft |
Manufacturer | Thornycroft |
Produced | 1911–1926 |
Specifications | |
Mass | 4.45 long tons (4.52 t) |
Length | 22 ft 2 in (6.76 m) 13 ft 8 in (4.17 m) wheelbase |
Width | 7 ft 3 in (2.21 m) |
Height | 10 ft 5 in (3.18 m) |
Engine | Thornycroft I4 6,256 cc petrol 45 bhp (34 kW) |
Payload capacity | 3 long tons (3.0 t) |
Drive | 4x2 |
Transmission | 4F1R |
Suspension | Semi-elliptical multi-leaf springs |
Maximum speed | 12 mph (19 km/h) |
References | A complete directory of military vehicles [1] |
The Thornycroft J Type was a British truck built by the Thornycroft company, it saw widespread service with the British military and Imperial forces during the First World War.
The J Type was a 3-ton 4x2 truck, it was powered by a Thornycroft M4 four-cylinder inline 6,256 cc side-valve petrol engine that developed 45 brake horsepower (34 kW) at 1,800 rpm, it drove the rear wheels through a four-speed gearbox. [1] [2]
The J Type was designed by Thornycroft to meet a 1911 War Office specification for a 3-ton "subsidy scheme" cargo truck, the scheme provided a grant of £110 to civilian companies towards the purchase price of trucks suitable for military service, but included a provision that the military could requisition the vehicles if they required them. [1] [2] [3] Initially the War Office purchased H, J and K Type chassis from Thornycroft, the first 24 being delivered August 1912 and May 1913 with further deliveries of all three type to follow, but in August 1914 the War Office settled on the J Type chassis. [1] Over 5,000 were delivered to the British military during the war, some were supplied to Imperial forces, and it remained in British Army service until 1930. [1] [2] [3] In the 1920s Thornycroft developed the X Type 3-ton chassis from the J Type. [2]
In order to provide mobile anti-aircraft defence, the British Army removed the QF 13-pounder gun from its field carriage and placed it on a high-angle pedestal creating the QF 13-pounder 6 cwt AA gun, it was usually mounted it on the rear of a lorry, 183 such self-propelled anti-aircraft (AA) guns were produced by Thornycroft on J Type chassis. [3] The 6 cwt guns were later replaced by the improved QF 13-pounder 9 cwt on the same chassis and despite being introduced as a stopgap solution it saw service on the Western Front until the end of the war, it remained in Canadian Army service until 1930. [3] The J Type 13-pounder self-propelled AA gun combination was very popular with its crews, being renowned for their reliability, although its very poor cross country performance was considered a failing. [3]
A J type lorry No.14201 in running condition is in the collection of the Hampshire Cultural Trust having entered the collection of its predecessor, the Hampshire County Council museum service, around 1990. [4] A second example is on display at the Milestones Museum in Basingstoke. [5]
A tank destroyer, tank hunter or tank killer is a type of armoured fighting vehicle, predominantly intended for anti-tank duties. They are typically armed with a direct fire artillery gun, also known as a self-propelled anti-tank gun, or missile launcher, also called an anti-tank missile carrier. The vehicles are designed specifically to engage and destroy enemy tanks, often with limited operational capacities.
An anti-aircraft vehicle, also known as a self-propelled anti-aircraft gun (SPAAG) or self-propelled air defense system (SPAD), is a mobile vehicle with a dedicated anti-aircraft capability.
The 105 mm Howitzer Motor Carriage M7 was an American self-propelled gun vehicle produced during World War II. It was given the official service name 105 mm Self Propelled Gun, Priest by the British Army, due to the pulpit-like machine gun ring, and following on from the Bishop and the contemporary Deacon self-propelled guns.
Associated Equipment Company (AEC) was a British vehicle manufacturer that built buses, motorcoaches and trucks from 1912 until 1979. The name Associated Equipment Company was hardly ever used; instead, it traded under the AEC and ACLO brands. During World War One, AEC was the most prolific British lorry manufacturer, after building London's buses before the war.
Thornycroft was an English vehicle manufacturer which built coaches, buses, and trucks from 1896 until 1977.
The AEC Matador was a heavy 4×4 truck and medium artillery tractor built by the Associated Equipment Company for British and Commonwealth forces during World War II. AEC had already built a 4×2 lorry, also known as the Matador.
An artillery tractor, also referred to as a gun tractor, is a specialized heavy-duty form of tractor unit used to tow artillery pieces of varying weights and calibres. It may be wheeled, tracked, or half-tracked.
The 3-inch gun M1918 was a United States 3-inch anti-aircraft gun that entered service in 1918 and served until it was largely superseded by the 3-inch anti-aircraft gun M3 in 1930, though the M1918 remained with some National Guard units until early in World War II. The M3 was subsequently replaced by the M1 90mm AA gun early in World War II, primarily during 1942. The M3 3" gun was later adapted for the anti-tank role, serving as the main armament of the M10 tank destroyer during World War II.
Portée describes the practice of carrying an artillery piece on a truck which can be fired from the vehicle or quickly dismounted and fired from the ground. The term is most often used to describe anti-tank equipments used by the British, Commonwealth and imperial forces in the Western Desert Campaign of the Second World War. Modern terms for mounting weapons on vehicles are technical or gun truck.
The 13 pounder 9 cwt anti-aircraft gun became the standard mobile British anti-aircraft gun of the World War I era, especially in theatres outside Britain.
The QF 3-inch 20 cwt anti-aircraft gun became the standard anti-aircraft gun used in the home defence of the United Kingdom against German Zeppelins airships and bombers and on the Western Front in World War I. It was also common on British warships in World War I and submarines in World War II. 20 cwt referred to the weight of the barrel and breech, to differentiate it from other 3-inch guns. While other AA guns also had a bore of 3 inches (76 mm), the term 3-inch was only ever used to identify this gun in the World War I era, and hence this is what writers are usually referring to by 3-inch AA gun.
Canadian Military Pattern (CMP) trucks were mutually coherent ranges of military trucks, made in large numbers, in several classes and numerous versions, by Canada's branches of the U.S. 'Big Three' auto-makers during World War II, compliant to British Army specifications, primarily intended for use in the armies of the British Commonwealth allies, but also serving in other units of the British Empire.
The Thornycroft Hathi was an early four wheel drive lorry built by Thornycroft in the 1920s. It was used by the British Army as an artillery tractor.
The Bedford MW was a general service truck used by the British Armed Forces during the Second World War.
The Pierce-Arrow armoured AA lorry was a self-propelled anti-aircraft carrier mounting a QF 2-pounder AA "pom-pom" gun, it was used by the Royal Marine Artillery during the First World War.
The Pierce-Arrow armoured lorry was a heavy armoured car mounting a QF 3-pounder Vickers gun, it was used by the Royal Naval Air Service during the First World War.
The AEC Y Type was a British truck built by the Associated Equipment Company (AEC), it saw widespread service with the British Army during the First World War.
The Morris Commercial CS8, also known as the "Morris 15 cwt" was a British light military truck of the Second World War.